Gas and Chemical Sensors / Detectors

Gas Warning Systems are completely installed in 3 steps.

Comprised of gas detector, control unit, and combined beacon/sounder, 123 systems provide early warning to workers exposed to toxic gas, combustible gas, or dangerous oxygen levels. Systems are supplied complete with all necessary cabling, and offer 4 LEDs (2 for each alarm level, 1 power supply, and 1 fault). 123 systems detect oxygen, methane, chlorine, carbon monoxide, nitrogen dioxide, and...

Read More »
Gas and Chemical Sensors / Detectors

Gas Warning Systems are completely installed in 3 steps.

Comprised of gas detector, control unit, and combined beacon/sounder, 123 systems provide early warning to workers exposed to toxic gas, combustible gas, or dangerous oxygen levels. Systems are supplied complete with all necessary cabling, and offer 4 LEDs (2 for each alarm level, 1 power supply, and 1 fault). 123 systems detect oxygen, methane, chlorine, carbon monoxide, nitrogen dioxide, and...

Read More »
Paramagnetic Oxygen Transmitter provides oxidation control.
Gas and Chemical Sensors / Detectors

Paramagnetic Oxygen Transmitter provides oxidation control.

Series 2200 includes control unit, EX control unit, and oxygen transmitter. Control unit works with 1 to 6 oxygen transmitters, and is certified for use in hazardous areas. Digital communications are enabled with Modbus protocol provided. EX control unit has above features but is also certified for EX hazardous areas. Transmitter provides intrinsically safe, linear, 4 to 20 mA analog output and...

Read More »
Paramagnetic Oxygen Transmitter provides oxidation control.
Gas and Chemical Sensors / Detectors

Paramagnetic Oxygen Transmitter provides oxidation control.

Series 2200 includes control unit, EX control unit, and oxygen transmitter. Control unit works with 1 to 6 oxygen transmitters, and is certified for use in hazardous areas. Digital communications are enabled with Modbus protocol provided. EX control unit has above features but is also certified for EX hazardous areas. Transmitter provides intrinsically safe, linear, 4 to 20 mA analog output and...

Read More »
Sensor Box Line is available in 3- or 4-pole versions.
Electrical Buses

Sensor Box Line is available in 3- or 4-pole versions.

SAI line includes fieldbus active components for Profibus DP, ASI Interface, and CAN Open. Features include bus and power connections through cable glands or metric M23 and M12 (coded B, PB) connections. Distributor base module is available as 4- or 8-channel M12 unit with IP68 or NEMA 6P rating or with IDC quick-fit technology for IP67 or NEMA 6 rating. M12 technology is available as 4- or...

Read More »
Oxygen Controller handles gas streams.
Gas and Chemical Sensors / Detectors

Oxygen Controller handles gas streams.

EOC Extractive Oxygen Controller measures and controls oxygen concentrations at ppm levels, in normal or highly acidic environments, such as gas streams. Because sensor element is modular, system has long service life. Replacement of core sensing element is less than 1/3 cost of new probe. Installation requires two simple steps: attach power and piping. It is highly reliable, provides...

Read More »
Current Transducer offers closed loop control.
Electrical Sensors / Detectors / Transducers

Current Transducer offers closed loop control.

DCSA Series loop powered, linear output current transformer provides output directly proportional to RMS AC current passing through external LCSC10T12 toroidal sensor. It provides either analog current or voltage: 4 to 20 mA, 1 to 5 Vdc, or 2 to 10 Vdc. Each unit is factory calibrated for monitoring (with LCSC10T12) 0 to 5, 0 to 10, 0 to 20, or 0 to 50 A. Transducer senses current draw on...

Read More »
Current Transducer offers closed loop control.
Electrical Sensors / Detectors / Transducers

Current Transducer offers closed loop control.

DCSA Series loop powered, linear output current transformer provides output directly proportional to RMS AC current passing through external LCSC10T12 toroidal sensor. It provides either analog current or voltage: 4 to 20 mA, 1 to 5 Vdc, or 2 to 10 Vdc. Each unit is factory calibrated for monitoring (with LCSC10T12) 0 to 5, 0 to 10, 0 to 20, or 0 to 50 A. Transducer senses current draw on...

Read More »
Sensor Box Line is available in 3- or 4-pole versions.
Electrical Buses

Sensor Box Line is available in 3- or 4-pole versions.

SAI line includes fieldbus active components for Profibus DP, ASI Interface, and CAN Open. Features include bus and power connections through cable glands or metric M23 and M12 (coded B, PB) connections. Distributor base module is available as 4- or 8-channel M12 unit with IP68 or NEMA 6P rating or with IDC quick-fit technology for IP67 or NEMA 6 rating. M12 technology is available as 4- or...

Read More »
Oxygen Controller handles gas streams.
Gas and Chemical Sensors / Detectors

Oxygen Controller handles gas streams.

EOC Extractive Oxygen Controller measures and controls oxygen concentrations at ppm levels, in normal or highly acidic environments, such as gas streams. Because sensor element is modular, system has long service life. Replacement of core sensing element is less than 1/3 cost of new probe. Installation requires two simple steps: attach power and piping. It is highly reliable, provides...

Read More »

All Topics