CAS Data Loggers    Chesterland, OH 44026
Mar 16, 2012 Designed to protect life science materials, Accsense A1-08 automated wireless system monitors temperatures from -40 to +70°C with 0.1°C resolution, provides cloud-based data storage and real-time reporting, and can connect to 6 NTC thermistor inputs. Solution also serves as temperature alarm system, complete with email, pager, and phone alert capabilities. Along with user-set sampling rate from 30 sec to every 24 hr, datalogger offers 2 inputs for connection to digital sensors.

CAS Data Loggers    Chesterland, OH 44026
Jan 31, 2012 Used for temperature monitoring/recording, Lascar EL-USB-1-LCD self-contained, stand-alone, USB-enabled datalogger has -31 to +176°F measurement range and ±0.5 accuracy. Current readings, status, and other information are shown on built-in LCD. User can cycle through 3 different recorded readings on LCD via built-in pushbutton. Other features include selectable immediate, delayed, and push-to-start logging; storage for up to 16,378 readings; and programmable alarm thresholds.

Omega Engineering, Inc.    Stamford, CT 06907
Nov 11, 2011 Accepting 2 thermocouple inputs, iSD-TC Series triggers alarm if temperature goes below or above set point. Alarm can also be triggered if AC power fails. In event of power failure, monitor will continue to collect data for 2 days powered by 9 V alkaline battery. Failure on Ethernet network will not interrupt data recording. Supplied with removable 2 GB SD Flash Memory card, iSD-TC can store up to 7 years of readings taken at 10 sec intervals.

Quest Controls, Inc.    Palmetto, FL 34221-4802
Jul 21, 2011 Designed to eliminate downtime by acting as early warning system, TELSEC MINI(TM) PLUS provides alarm monitoring in cabinets, OTNs, shelters, small remote sites, and computer centers. Unit is powered from 24-48 Vdc and can monitor up to 6 universal inputs, including temperature, humidity, commercial power fail, DC Plant alarms, HVAC failures, fire/smoke, and intrusion. Featuring embedded Web Server, TELSEC MINI PLUS provides SNMP traps and informs over Ethernet back to alarm center.

CAS DataLoggers, Inc    Chesterland, OH 44026
Jun 29, 2011 Used to measure temperature in medical refrigerators, freezers, incubators, and cryogenic storage, A2-05 consists of Ethernet Wired Temperature Measurement Pod with connections for 2 external -148 to +212°F RTDs and one -328 to -148°F thermocouple sensor. Pod will store up to 256 data points, and it can also be used to access live and historic data as well as set local and remote alarms. Alarm levels and contacts can also be sent by phone, email, and text message.

Sensitech, Inc.    Beverly, MA 01915
Jun 17, 2011 Designed to help customers mitigate risk by allowing precise monitoring of temperature-sensitive products during storage, handling, and distribution, TempTale®4 Temperature Monitors are available with up to 6 programmable alarm settings, 16,000 data point storage capacity, and NIST® Certificate of Validation. Standard TT4 version lets users set multiple time-and-temperature alarms, while TT4 USB version offers added benefit of USB interface and PDF-formatted time-and-temperature report.

Raytek Corporation    Santa Cruz, CA 95061 1820
May 05, 2011 Model CS210 process imaging system enables cement manufacturers to continuously monitor rotary kilns to detect hot spots due to refractory loss, damage, and wear. Providing temperature monitoring along entire length of kiln shell, IR system also detects abnormal conditions such as faulty flame position and shape. Unit includes MP150 HR linescanner, with 1024 data points/scan line, as well as Ethernet TCP/IP communications and Windows® 7 compatible DataTemp® CS Software.

Bell & Gossett    Morton Grove, IL 60053
Apr 25, 2011 Designed to continuously measure vibrations and temperature at pump power end, i-ALERT(TM) uses 2 red blinking LEDs to alert personnel when pump exceeds pre-set vibrations and temperature limits so that action can be taken before permanent damage occurs. Single green LED indicates when monitor is operational and has sufficient battery life. Operating in ambient temperatures of -40 to 212°F, i-ALERT(TM) provides ±15% accuracy across temperature range.

TRIATEK    Norcross, GA 30093
Apr 22, 2011 Available in surface mounted or stainless steel flush mounted versions, Model FMS-1650-x-R connects directly to controller in room to be monitored and is updated instantly as room conditions change. Unit features full color LCD touchscreen that can be configured to display pressure, temperature, humidity, air changes, and room state simultaneously, or only those room parameters that require close monitoring. In addition to password protection, monitor provides both audible and visual alarms.

MadgeTech    Warner, NH 03278
Mar 15, 2011 Featuring flexible piercing probe, RFOT wireless temperature data logger can be used in harsh environments in temperatures from -4 to +212°F. Splash-proof device withstands wash down cycles and can record and transmit internal product temperature readings back to central computer in real-time. Included software features programmable control points, which are automatically annotated on graph and tabular data views, while data can be exported to Excel® for further calculations.

Colfax Corp.    Richmond, VA 23235
Dec 22, 2010 Measuring 2.4 x 1.6 x 1.3 in., SmartSense(TM) Pulse fits near bearing on pump to gauge temperature and vibration. LEDs indicate pump performance and provide preventive maintenance alerts when needed. Installed on new pumps during manufacture or added as retrofit to existing pumps, monitor is suited for variety of industries, including oil and gas, power generation, mining, chemicals, and marine.

Hampshire Controls Corp.    Dover, NH 03821
Dec 17, 2010 Combining alarm systems and LN2 injection system, Model CA5000 provides security for products at temperatures down to -65°C. Programmable alarm, control set points, and alarm delay times are standard, and parameters stored in non-volatile memory are maintained even when power is lost. When malfunction occurs, and freezer warms above set point, user-defined amount of LN2 is injected into freezer. Internal battery with charger keeps alarm running for at least 24 hr after power outage.

Emerson Process Management    Pleasanton, CA 94566
Dec 13, 2010 Model CSI 6500 is available with A6630 temperature module, which complements vibration monitoring capabilities by delivering critical bearing temperature measurements. Module A6630 accepts RTD and thermocouple signals directly, reducing installation efforts. In keeping with API 670 specification, A6630 has 6 or fewer channels per module, 4-20 mA outputs, and relay logic for voting and automatic machine trips.

Quest Controls, Inc.    Palmetto, FL 34221-4802
Nov 16, 2010 Powered from 24-48 Vdc, TELSEC® MINI can monitor up to 6 universal inputs including temperature, humidity, commercial power fail, DC plant alarms, HVAC failures, fire/smoke, and intrusion. Universal inputs accept digital contacts or any 0-5 Vdc or 4-20 mA sensors. Suited for cabinets, OTNs, shelters, small remote sites, and data switching and computer centers, monitor provides SNMP traps, sends information over Ethernet to alarm center, and supports email alarm messaging.

Linear Technology Corp.    Milpitas, CA 95035
Sep 24, 2010 Intended for 3 and 5 V systems, LTC2990 incorporates 14-bit ADC, 10 ppm/°C voltage reference, and I²C digital interface in one RoHS-compliant, 10-lead MSOP to provide submillivolt voltage resolution. Design enables configuration of 4 single-ended voltage inputs to measure any combination of internal temperature, remote temperature, remote voltage, and internal VCC for single or repeated measurements. Respectively, internal and remote measurement accuracies are +1°C and +0.5°C.

TandD US, LLC    Saratoga Springs, NY 12866
Sep 09, 2010 Operating on 1 AA battery, 4-channel Model RTR-574 measures luminosity from 0-130 k lx, UV from 0-30 mW/cm², relative humidity from 10-99%, and temperature from 0-55°C. Wireless unit can store up to 8,000 readings x 4 channels for total of 32,000 readings in one-time or endless recording mode. Measuring 2 x 3 in., logger supports automatic downloading of logged data, real-time monitoring, and warning notifications by email or text to cell phone.

Newport Electronics, Inc.    Santa Ana, CA 92704
Aug 13, 2010 With Model iSD-TC, users can monitor and record temperature of critical equipment and locations over Ethernet network or Internet via Web browser. Device can trigger alarm if temperature goes above or below user-determined set point, and alarms can be sent by email to single user or to group distribution list, including text messages to cell phones and PDAs. Supplied with removable 2 GB Flash Memory card, monitor enables user to store up to 7 years of readings taken at 10-sec intervals.

Newport Electronics, Inc.    Santa Ana, CA 92704
Aug 02, 2010 Used for remote surveillance of environmental conditions, Virtual Chart Recorders(TM) let users view virtual charts as well as record temperature, relative humidity, dew point, and barometric pressure over Ethernet network or Internet via Web browser. Instruments can trigger alarm - email or cell phone/PDA text message - if reading goes above/below user-determined set point, and removable 2 GB SD Flash Memory card stores up to 7 years of readings taken at 10 sec intervals.

MadgeTech    Warner, NH 03278
Jun 08, 2010 Vaccine temperature monitoring system (VTMS) provides continuous monitoring and data logging of items in refrigerators, freezers, and coolers. It includes TCTemp2000 datalogger with thermocouple, power supply, and LCD that offers current reading and minimum, maximum, and average statistics. To prevent false alarms, Glycol bottle in datalogger provides temperature-buffered readings. Product alerts user via email or text message if refrigerator fails or temperature is outside nominal range.

Testo Inc.    Sparta, NJ 07871
Jun 08, 2010 Designed for critical environments, Models 622 and 623 display ambient temperature from 14-104°F, wet bulb temperature, relative humidity from 0-100%, and barometric pressure from 4.3-17.4 psi and 119-481 in. wc. Histogram of data up to 12 weeks, including date and time, can be recalled at any time, on site, without PC or accessories. Suitable for wall or desk mounting, hygrometers display user-selected alarms/limit values for all parameters.