EyeLock Inc    New York,, NY 10017
Apr 22, 2013 Able to authenticate 50 people/min at distance of 4 ft, HBOX® access control system suits such rapid-throughput areas as airports, stadiums, and enterprise environments. This high-throughput iris recognition device delivers video-based, real-time, at-a-distance, in-motion iris capture and stores user records onboard. Identity authentication system connects via Wiegand, F/2/F, Relay, and Ethernet for integration with existing access control platforms.

SJE-Rhombus    Detroit Lakes, MN 56502
Apr 19, 2013 Housed in 2-color molded enclosure that meets Type 3R water-tight standards, Tank Alert® EZ Indoor/Outdoor Alarm System can serve as high or low level alarm based on float switch model used. Unit integrates red translucent LED beacon; upper half illuminates and horn sounds when alarm condition occurs. Once condition is clear, alarm automatically resets. Removable cover provides access for field wiring while internal circuitry remains protected.

Holocom, Inc.    San Diego, CA 92121
Apr 18, 2013 Successfully evaluated by U.S. Air Force for alarmed PDS applications,1U HC508 Alarm Processor Unit provides additional layer of protection to hardened carrier protective distribution systems for government and other high-security networks. System fits standard size rack and is capable of protecting 8 zones of fiber optic or copper cable infrastructure. Each zone consists of single-strand sensing cable design, eliminating need for loop-back cable in cable carrier.

Safety Technology International    Waterford, MI 48327
Mar 20, 2013 With 1,000 ft range between components, Wireless Garage Sentry® Alert with 4-Channel Voice Receiver (STI-V34300) sends wireless radio signal to receiver when garage door sensor is activated. Voice receiver offers 10 tones/tunes and 53 selectable words; as many as 4 tones/tunes or words can be programmed in sequence to identify door status. Sensor is supervised for low battery and signal reception, and magnetic contact with 18 in. lead accommodates irregular installations.

Banner Engineering Corp.    Minneapolis, MN 55441
Feb 20, 2013 Featuring metal housing and cabled connector that provide electrical noise immunity, Machine-Mountable Remote Display enables iVu Vision product users to view iVu sensor image remotely and serves as constant monitoring and user programming interface. Stationary remote display has 3.5 in. diagonal, color LCD flat-panel touchscreen and viewing angle of 60° left, 60° right, 50° up, and 55° down. Dual LEDs provide sensor feedback, one for Power/Error and one for inspection Pass/Fail.

Invensys PLC    London   United Kingdom
Feb 18, 2013 Certified by TÜV Rheinland to IEC61508 Systematic Capability 3 for use in applications up to Safety Integrity Level 3, Triconex Safety View improves situational awareness and broadens visibility into risks that come with system startups, shutdowns, and other critical process transitions that must be managed by plant personnel. Alarm and bypass management solution, built on ArchestrA System Platform, draws attention to changes in process conditions that require immediate attention.

Holocom, Inc.    San Diego, CA 92121
Jan 29, 2013 Featuring 1U design, Fiber SenSys/Holocom HC508 provides additional layer of protection to hardened carrier protective distribution systems for SIPRNet and other high-security government networks. Unit is capable of protecting 8 zones of fiber optic or copper cable infrastructure, each consisting of single-strand sensing cable, eliminating need for loop-back cable in carrier. To eliminate nuisance alarms, system includes optimized tuning and calibration software.

Kyzen Corp.    Nashville, TN 37211
Jan 23, 2013 Available as add-on monitoring system, InstaTrak™ provides process traceability of PCB assemblies cleaned in in-line aqueous cleaning system from beginning to end. System has ability to barcode scan PCB assembly and associate all in-line process parameters to that board, including conveyor speeds, tank temperatures, and spray bar pressures. With traceability complying with ISO and FDA standards, InstaTrak™ will track and store data using Microsoft SQL Database.

Electro-Sensors, Inc.    Minnetonka, MN 55343 9108
Jan 11, 2013 As part of predictive maintenance program to protect against breakdowns/failure, Electro-Sentry 16 can be used on grain elevator legs or conveyors to monitor up to 16 critical points for bearing temperature and belt alignment. Sensors provide 4–20 mA signal, and all sensor values and alarms are displayed on front panel. One-button tests are offered for all sensors, set points, and alarm output relays, and dust ignition-proof sensors are rated for Class II, Div 1 hazardous locations.

BlueLevel Technologies, Inc.    Rock Falls, IL 61071
Jan 07, 2013 Used for point and continuous level measurement of powder, granular, liquid, and slurry materials, Models AP/APX come in 5 probe configurations – Standard, Mini, Cable-Extended, High Temperature, and Super High Temperature – all of which include integral electronics available with Ordinary Location or Explosion-Proof enclosures. Features include LED indication of normal and relay alarm status, NEMA Type 4X powder-coated enclosure, and ¾ in. NPT stainless steel process connection.

SKF USA, Inc.    Lansdale, PA 19446
Nov 15, 2012 Designed for rotating machinery with constant operating conditions, SKF Machine Condition Indicator periodically makes velocity measurements to keep track of overall machine health and highlight potential problems relating to misalignment and imbalance. Enveloped acceleration measurements are used to detect possible bearing degradation. In addition, device monitors machine operating temperature. Built-in intelligence enables measurement evaluations and helps avoid false alarms.

AMETEK Drexelbrook    Horsham, PA 19044
Nov 13, 2012 Universal IV CM monitor is accurate to 0.03% water with measurement resolution of 0.0002% water. It takes average of capacitive property of fluid over its entire length, and then onboard electronics compute relationship between capacitance change and water cut. Unit features Perm-A-Seal sensing element, installed directly into main process line, and built-in LCD and keypad. Configurable for NPT or flanged mountings, product also installs in all common pipe diameters.

Temperature Alert    Boston, MA 02111
Nov 13, 2012 Using GSM cellular phone networks, Solar Cellular Edition lets farmers and agriculturalists monitor crop temperature, water consumption, soil quality, and other environmental conditions remotely via email, text messaging, and/or voice messages. Solar-powered system, designed for 24/7 monitoring, uses rechargeable batteries for power during dark or overcast conditions of up to 4 weeks and features fault-tolerant design that ensures message delivery.

Safety Technology International    Waterford, MI 48327
Nov 08, 2012 Wireless Universal Alert (STI-34400), which is programmable and may be used as one on-board reed switch, remote set of terminals, or tilt switch, issues audible and visual alerts when different conditions occur in or around home/office. With included 4-channel receiver, users can monitor up to 4 STI devices from one location. Magnetic contact with 18 in. lead is provided for irregular installations, and transmitter may also be used with STI's 4-Channel Voice Receiver or 8-Channel Receiver.

OMAX Corp.    Kent, WA 98032
Oct 08, 2012 Part of Intelli-MAX® 18 control software, Intelli-VISOR System Monitoring Package enables users to oversee status and performance of OMAX JetMachining® Centers throughout cutting process. Intelli-VISOR utilizes Modbus® communications protocol and features machine sensor network to capture and share real-time data from different components. Operators can select which aspects of machine are monitored and specify action machine should take if operation is about to fail or has failed.

AMETEK Power Instruments    Rochester, NY 14605
Sep 27, 2012 Web browser-based SERNET records alarms with 1 msec precision for determining root cause and corrective actions. With IEC61850 protocol, system can receive alarms directly from other intelligent electronic devices (IEDs) using Generic Object Oriented Substation Events (GOOSE) messaging. Alarm time stamp can come from IED or SERNET, which is time synchronized with IRIG-B, NTP, or IEEE1588 via GPS sources. IEC61850 alarms can also be re-transmitted using Modbus and DNP protocols.

TR Electronic, Inc.    Troy, MI 48083
Aug 10, 2012 Suitable for turning and milling machines as well as all machining centers, BQS Tool Detection System monitors tools and workpieces for tool presence, tool breakage, and tool ejection. System also performs object recognition, free space monitoring, and process monitoring, and checks for position definition and clamping errors. Housed in anodized aluminum with multi-stage sealing system and IP68 rating, system features fixed starting position with scanning angle of 15-300° on both sides.

Pro Mach Inc.    Loveland, OH 45140
Jul 19, 2012 Capable of reading 21 barcode symbologies, Model TVS 1000 ensures package contents, labels, and barcodes are perfectly matched. Stainless steel system scans bag or tray for presence and proper placement of label, checks whether barcode can be read, and if so, validates correct barcode for contents of package. Packages not meeting specifications are shunted off line. Adjusting automatically to different package sizes, system is suited for meat, poultry, dairy, seafood, and produce operations.

Huntingdon Fusion Techniques-USA Inc.    Melbourne, FL 32936-1175
Jun 22, 2012 Measuring oxygen levels down to 100 ppm, PurgEye® 100 is adequate for most stainless steels. PurgEye® 300 measures oxygen down to 10 ppm and has integral software to record oxygen levels throughout purging cycle. PurgEye® 500 has all features of PurgEye® 300, plus integral pump that continuously extracts samples of gas from volume being purged for analysis. PurgEye® 600, measuring from Atmosphere to 10 ppm, integrates measuring system with touchscreen and internal recording of data.

Webscan, Inc.    Longmont, CO 80501
Jun 04, 2012 Delivering even illumination over 2 x 1 ½ in. (standard) or 2 ¾ x 2 1/16 in. (+Plus) field of view, TruCheck Optima can verify any number of linear (1D) and two dimensional (2D) barcodes in same scan. Fully integrated and portable TruMatrix(TM) imaging head connects to PC via USB port, and unit complies with ISO/IEC and GS1 standards for barcode verification. Along with software interface and solid-state LEDs, verifier offers automatic generation and storage of detailed reports.