Level Monitors

Sensors, Monitors & Transducers

Remote Sensing System interfaces with almost any sensor mix.

January 7, 2015

Intended for tank level monitoring, SignalFire Remote Sensing System™ integrates open architecture mesh network that allows users to choose preferred sensor type for application as well as mix sensor types in same network. System communicates and powers virtually any sensor with 4–20 mA, 1–5 V, Modbus, Hart, digital IO, and other analog and digital interfaces. Because SFRSS mesh network operates at lower frequencies, it can communicate at ranges of up to 3 miles between nodes. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Solids Scanners continuously measure level and volume.

October 6, 2014

For optimized process and inventory control, Rosemount® 5708 Series 3D Solids Scanners provide level, volume, and mass measurement of bulk solids and powders in large vessels, bins, and silos. Units use acoustic measurement and 3D mapping technologies to provide accurate results, even when measuring uneven or sloping surfaces under dusty conditions. Models are available for silos up to 16 ft dia x 230 ft high, as well as for larger vessels and silos up to 39 ft dia x 230 ft high. Read More

Test & Measuring Instruments, Controls & Controllers, Sensors, Monitors & Transducers

Non-Contact Level Meter targets solids applications.

July 22, 2014

With frequency modulated continuous wave radar technology, DR6300 Series provides distance, level, volume, and mass measurement of powders, granulates, and other solids. Non-contact, 2-wire, k-band meter offers choice of touchscreens, including tank illustration, bar graph, oscilloscope, signal, and reflectivity screen. Available with drop antenna or horn antenna, device has measuring range of 260 ft and will operate up to flange temperature of 290°F and pressures of 580 psig. Read More

Test & Measuring Instruments, Controls & Controllers, Sensors, Monitors & Transducers

Single Float Level Transmitters suit shallow tank monitoring.

July 16, 2014

As drop-in replacements using existing tank fittings, XM/XT Series provide continuous fluid level monitoring of tanks with depths <20 in. XM/XT-300 Series, constructed from all-wetted polysulfone plastic parts, is direct compatibility with various chemicals, while XM/XT 700 Series comes in stainless steel or brass. Both fluid level transmitters feature 0.14 in. resolution, indicating length to 14 in., and stem length to 20 in. Custom mountings and float materials are available. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Transmitter/Receiver Pair enables wireless level measurement.

July 11, 2014

Able to maintain line of site communications over distances up to 125 ft, Wireless Level Measurement Transmitter and Receiver platform is intended for liquid level (0.0–34.6 ft) measurement. Transmitter sends updated level data and battery condition data once every second, while receiver reads that information and provides analog 4–20 mA output and SCADA register data. RS-232 serial port (Ethernet optional) allows connection to SCADA system for remote monitoring. Read More

Safety & Security Equipment, Sensors, Monitors & Transducers

Dual Alarm System facilitates liquid level monitoring.

February 13, 2014

Able to be used for high level, low level, or filter alarm needs, Tank Alert® DUO features one red LED beacon, one yellow LED beacon, and buzzer. Design lets users monitor two level conditions with one UL-/cUL-Listed system. Meeting Type 3R water-tight standards, system comes with 15 ft SJE SignalMaster® control switch, alarm test/normal/silence switch, knock out holes for conduit entry location, and auxiliary alarm contacts for attachment of remote devices. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Radar Level Meter helps conserve time and resources.

December 10, 2013

LevelWave Series provides measurement solution for liquids, including corrosive, sticky, or difficult media. While 360° rotation allows for side or top mounting, external display fosters intuitive configuration. Modular design facilitates and accelerates in-field installation, and option is available for full digital remote electronics up to distance of 100 m. Applications include blending, distillation tanks, process tanks and separators, solid silos, and storage tanks. Read More

Sensors, Monitors & Transducers

Wireless Level Monitoring System works with single remote tanks.

November 19, 2013

Delivering real-time monitoring and analytics for single tanks, totes, and containers, Digi Connect® Tank reduces manual inspection expenses and tightens supply chain. This fully integrated, cellular-enabled, automated solution helps companies manage remote single tank assets via up-to-the-minute tank level and location data. Along with CDMA and 3G GSM cellular technologies, features include ultrasonic sensor, integrated GPS, and NEMA 4X enclosure. Battery life ranges from 2–3 years. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Acoustic Gas Leak Detector ignores background noises.

July 22, 2013

Designed to withstand harsh environments, from arctic to tropical conditions, non-contact FlexSonic™ analyzes 24 discrete ultrasonic bands while ignoring nuisance ultrasonic sources. High-fidelity microphone continuously monitors for distinct ultrasound emitted by pressurized gas leaks across widest spectrum of frequencies. Unit can be programmed to ignore background noises, discerning between gas leaks and environmental noises such as metal-on-metal contact, fans, machinery, or vehicles. Read More

Test & Measuring Instruments, Plant Furnishings & Accessories, Sensors, Monitors & Transducers

Cloud-Based System facilitates remote tank monitoring.

May 24, 2013

Using APG remote level sensors and modules or any sensor with 4–20 mA output, Tank Cloud Remote Monitoring lets users monitor facilities and processes from anywhere with Internet connection. Web portal, in addition to offering operators and managers ready access to real-time and historical data, enables alarm and permissions management. System can monitor level, pressure, temperature, flow, pH, and other process variables and alert relevant workers to alarms via email or text messaging. Read More

Sensors, Monitors & Transducers

Capacitive Level Sensor is suited for challenging fluid detection.

April 24, 2013

IP67-rated, 2/25 x 1/18 in. CAP-100 Series senses liquid level through walls of various bottle types – plastic, glass, fiberglass – with wall thicknesses to 0.39 in. Monitoring level from outside sealed container, this non-contact, non-intrusive series supports aqueous or non-aqueous liquid detection with choice of Wet- or Dry-Sink switch actuation. Sensors suit medical applications, such as waste, reagent, buffer, or diluent as well as dark, sticky, or viscous fluids. Read More

Sensors, Monitors & Transducers

Non-Contact Level Measurement System aids dry solids inventory.

April 16, 2013

As level measurement system leveraging non-contact scanning technology, 3D Volume Scanner System is designed for food ingredient bulk inventory measurement applications. It takes multiple measurements of product profile, building 3D map of bay/silo/vessel/stockpile. Based on volumetric measurement and product density, operators can identify total inventory and product profile. This lets operators reduce safety stock levels, lending to economic advantages. Read More

Sensors, Monitors & Transducers

Ultrasonic Level Monitor serves single-tank applications.

January 28, 2013

Offered as single-tank ultrasonic model, SONO-1000, measures range of bulk solids in vessels up to 98 ft high. AC and DC versions are available and feature up to 4 process connections, two ½ in. NPT and two M20 x 1.5, that allow flexibility when connecting to power source. Suited for locations with limited number of vessels, system is designed to facilitate installation and start up regardless of amount of material in vessel. Features also include 4–20 mA output and programmable display. Read More

Sensors, Monitors & Transducers

Tank Gauging System utilizes wireless technology.

September 25, 2012

Installed without new long distance signal wiring, Rosemount® Raptor with Smart Wireless technology enhances tank farm automation. Tank gauging systems feature components that include radar gauges that use self-configuring, 2-wire, high-speed FOUNDATION™ fieldbus technology. Wirelessly connecting tank farm to control room, system forms network of digital intelligence that improves inventory management, loss control, overfill avoidance, and maintenance efficiency throughout plant. Read More

Computer Hardware & Peripherals, Sensors, Monitors & Transducers, Display & Presentation Equipment

LCD Touch Panel Monitor remotely checks alarm probes.

August 15, 2012

Intended for overfill protection applications, Model MCG 7030 is compatible with MCG 1090 and MCG 1095 Level Alarm Probes. When interfaced with multiple tanks, monitor provides information on probe status, event history, test history, field status, and tank details. Up to 100 separate alarm probes can be monitored by using single, 4-wire data highway. When coupled with existing gauging or SCADA system, MCG 7030 can function as alarm data acquisition station. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers, Green & Clean

Remote Monitoring System streamlines recycling container pickup.

August 14, 2012

Used for managing remote recycling containers, cBin(TM) provides ability to see container fill levels on daily basis as well as tools to build customized collection routes to pick-up full containers. Remote sensor in container wirelessly sends fill level and asset status information to Web portal, which can be accessed to manage container inventory and pickups. Automatically, sensors measure container fill levels hourly and send immediate updates if action levels are exceeded. Read More

Controls & Controllers, Sensors, Monitors & Transducers

Level Transmitter offerse immunity from diverse factors.

July 3, 2012

Featuring worldwide approvals, Universal IV(TM) RF Admittance/Capacitance continuous level measurement transmitter is intrinsically safe, explosion proof, and flameproof. This 2-wire, 4-20 mA loop transmitter features digital HART protocol as well as Cote-Shield(TM) technology and is immune to interference from vapor, dust, foam, and tank obstructions. Along with pushbutton LCD for configuration and monitoring, product features stable, repeatable, and accurate measurement within 0.25% of range. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Phase Monitor analyzes supercritical and high pressure fluids.

June 6, 2012

Designed to determine solubility of various compounds and mixtures in supercritical and high-pressure fluids, SFT Phase Monitor II provides direct, visual observation of dissolution, precipitation, and crystallization of materials under conditions precisely controlled by researcher. Effect of co-solvents on solubility of compounds of interest may be investigated as well. Monitor can perform experiments at pressures up to 10,000 psi and from ambient temperature to 150°C. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Magnetostrictive Probe provides continuous level measurement.

April 19, 2012

Comprised of wave guide, probe housing, float with permanently-embedded magnets, and motion or stress sensing device, MCG 8151 gathers level gauging information, can act as point switch for overfill alarms, and has 5 temperature sensors to provide average temperature measurement of product. Offering resolution of ±.001 in., MCG 8151 is available in lengths up to 70 ft and can be installed in nearly any type of storage or process vessel, aboveground or underground. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Continuous Level Measuring System provides 100 ft range.

February 29, 2012

Designed for continuous measurement of powder and bulk materials in silos, tanks, or hoppers, Series DBOB utilizes internal motor that drives weight suspended by firm stainless steel tape down to bulk material level. Upon reaching material, unit reverses and weight is drawn back into upper stop position. Distance weight descends is electronically measured based on internal rotations of unwinding tape. User-programmable to output height or volumetric signal, device measures at rate of 0.6 fps. Read More