Flow Monitors

Sensors, Monitors & Transducers

Multi-Threat Monitor offers more than 20 sensor choices.

October 20, 2016

With meteorological monitoring and GPS-enabled location identification of hazards, AreaRAE Plus helps connected workers and managers make fast, informed safety decisions. Transportable monitor can communicate wireless signals up to 2 miles and has multiple configurations to provide both on-the-scene and remote safety information. Users can select from over 20 sensors for toxic and combustible gases at lower explosive limit, oxygen, and photoionization detector that monitors VOCs at ppm levels. Read More

Laboratory and Research Supplies & Equipment, Sensors, Monitors & Transducers, Test & Measuring Instruments

Wireless IoT Sensors enhance water monitoring capabilities.

September 28, 2016

Powered by user-replaceable C lithium battery, Telog® 41 Series uses low-power, Long-Range (LoRa®) wireless communications to remotely measure and monitor water, wastewater, and groundwater systems, including water pressures, flows, levels and rainfall volumes. These IoT sensors, as part of smart water infrastructure, communicate data using LoRaWAN technology to Telog software at intervals between 5 min and 24 hr. Configurable alerts and alarms automate event detection/reporting. Read More

Sensors, Monitors & Transducers

Wireless Area Monitor communicates present gas hazards.

September 26, 2016

Able to detect up to 7 gases, Radius™ BZ1 ensures workers are aware of alarm and reason behind it via distinctive audio and visual cues and display size. Custom alarm action messages help workers take appropriate action according to present gas level, while run time of 7 days (168 hr continuous) suits long-term projects, routine maintenance, and emergency response applications. Rugged and transportable, this unit works with LENS™ Wireless peer-to-peer communication system. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

GlobalSense System Stirs Winds of Change for Atmospheric Monitoring

August 3, 2016

ALBANY, N.Y. - Mano NanoTechnologies, Inc. (MNT) has received the second phase of a Small Business Innovation Research contract from the National Oceanic and Atmospheric Administration to develop and demonstrate a new atmospheric monitoring system known as GlobalSense. The system features an ensemble of disposable airborne drifters, called environmental Motes or eMotes, that will be carried by... Read More

Sensors, Monitors & Transducers

Gas Monitoring Systems for Pollution Control

July 11, 2016

Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way. Control Instruments Corp.’s various... Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Gas Monitoring Systems for Wastewater Applications

July 11, 2016

Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability Analyzers are used to continuously monitor the waste stream for flammable gases and vapors.... Read More

Electrical Equipment & Systems, Optics & Photonics, Sensors, Monitors & Transducers, Test & Measuring Instruments

Intelligent Gas Module enhances commercial gas line monitoring.

June 24, 2016

Enabling distributed intelligence, M250 records and transmits pressure and temperature reading data from commercial/industrial gas line monitors. It provides secure, open standards, IPv6, 2-way communication to utility using RF mesh network, and available data includes pressure and temperature as well as corrected and uncorrected volumes. Along with 4 dynamic channels of register data, support includes Modbus connection and user-selectable time increments for data retrieval. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Personal Multi-Gas Monitor helps keep workers safe.

May 25, 2016

Rated to IP68, configurable Ventis™ Pro Series includes such safety features as iAssign™ Technology, which tracks users and sites in real-time using NFC; dedicated panic button and man-down alarm; acknowledgeable gas alerts; and alarm action messages. Ventis™ Pro4 supports up to 4 sensors (LEL/CH4, O2, CO, CO/H2 Low, H2S, SO2, NO2, or HCN), while Ventis Pro5 detects up to 5 and expands support to NH3, CO2/hydrocarbon IR, CO2/CH4 IR, and CO/H2S.
Read More

Sensors, Monitors & Transducers

Detection Alarming Flow Switch/Monitor is SIL 2-compliant.

April 11, 2016

Constructed of all wetted parts manufactured with 316L stainless steel and Hastelloy C22 thermowells, insertion style FS10i is temperature-compensated and suited for use wherever detection and user warning of out-of-range or at no-flow conditions for air, gases, and water or other liquids is required. Flow trip point or alarm warning is produced within seconds, and sensitivity and setpoint range are 0.25–400 SFPS for air/gas and 0.01–0.5 FPS for water or liquids. Read More

Controls & Controllers, Fluid & Gas Flow Equipment, Sensors, Monitors & Transducers, Test & Measuring Instruments

Alicat Releases Gas Select 6.0 Firmware for its Mass Flow Meters and Controllers

April 6, 2016

New user-selectable engineering units, better control and faster data with new control software Tucson, Arizona – Alicat Scientific has updated its Gas Select™ firmware for Alicat mass flow meters, mass flow controllers and pressure controllers. Gas Select 6.0 improves user control and data speed, adding features that enable users to make changes to instruments without a factory visit. ... Read More

Sensors, Monitors & Transducers

Alarm/Monitor supports up to 16 points in complex gas systems.

April 4, 2016

Reporting and recording status for up to 16 individual points, 575 Series System Monitor is suited for fully configurable automatic switchovers and fail-safe gas delivery devices. All inputs can be grouped by sub-system for display and monitoring, and status of all inputs is displayed locally with high-visibility, color-changing LEDs. System status may also be accessed via programmable, dry-contact outputs, integral Web server, or onboard mail server based on user-defined triggers. Read More

Sensors, Monitors & Transducers

Industrial Flow Monitor combines advanced controls, easy setup.

March 2, 2016

Blancett® B2900, configurable for loop and battery power, offers advanced DSP technology and accessibility-optimized package. Within polycarbonate NEMA 4X housing, electronics are located on one board. Enclosure also features LCD with pushbutton programming as well as pre-drilled hole for external wiring connections. By processing frequency output from flow sensor, monitor interprets signal to calculate flow rate and total flow simultaneously with 10-point linearization. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Future Electronics Promotes CMOS Ultra Low Power Digital Gas Sensors from Cambridge

February 4, 2016

Pointe Claire, Quebec - Future Electronics, a global leading distributor of electronic components, recently announced immediate shipping availability for Cambridge's CMOS CCS811 ultra low power digital gas sensors for monitoring indoor air quality. The CCS811 is an ultra-low power digital gas sensor solution which integrates an industry leading gas sensor solution with a microcontroller... Read More

Sensors, Monitors & Transducers

PID Wireless 6-Gas Monitor offers real-time reading access.

December 28, 2015

Certified for Class I, Division 1, Groups A/B/C/D, T4 hazardous atmospheres, portable MultiRAE Benzene delivers benzene-specific snapshot. Included 6-tube cartridge (RAE SepTube™ Cartridge) operates in conjunction with integrated photoinozation (PID) chamber. Benzene measurement range is 0.1–200 ppm, and RAE SepTube Cartridge filters out other VOCs and gases to eliminate cross-interference. One- to 5-sensor module supports interchangeable electrochemical, combustible, and PID sensors. Read More

Sensors, Monitors & Transducers

Wet Well Analysis for Methane, Oxygen and Hydrogen Sulfide

August 21, 2015

ENMET’s Wet Well Monitoring System is specifically designed for monitoring Methane (CH4), Oxygen (O2) and Hydrogen Sulfide (H2S) in a hazardous wastewater treatment plant environment.  The system incorporates the CP-60 controller with 3 remote 4-20 mA/24 VDC sensor/transmitters in Explosionproof Class I Div 1, Group B, C and D enclosures.  The CP-60 controller provides 24 VDC power,... Read More

Sensors, Monitors & Transducers

Fan and Filter Fan Air Flow Monitor has compact design.

June 24, 2015

Installed via clip or clamp to indicate positive or negative air flow of fans, CE-compliant FSW800B series is available with reed/magnet contact and comes in NO and NC configurations. Housing measures 1.3 x 0.7 x 0.3 in. and is constructed of black, UL 94HB plastic. When properly installed and connected in series with optical or audible signaling device, bi-directional switch will activate electrical contact if air flow falls below 8.2 fps – either turning the signaling device on or off. Read More

Machinery & Machining Tools, Materials & Material Processing, Sensors, Monitors & Transducers

Flow Tuning and Measurement System offers accuracy to ±1%.

May 21, 2015

Based on MICROFLOW technology, which monitors flow of abrasive media through small passages in real-time, EXTRUDE HONE™ MF PROGRESS™ is aimed at orifices 100–350 µm in parts less than 30 mm in diameter and flow rates up to 5 lpm. Modular system is available in various inside station layouts, including flow tuning, media reclaim, flush module, test module, and marking. Machine comes with expanded on-screen maintenance capabilities and optimized filtration to further pump and valve life. Read More

Sensors, Monitors & Transducers

Portable 5-Gas Monitor detects VOCs through PID technology.

March 16, 2015

Detecting and displaying up to 5 gases simultaneously using plug-and-play sensor design, PS500 provides audible and visual alarms to prevent exposure to flammable and toxic gases as well as oxygen enrichment or deficiency. Pre-entry checking can be carried out with optional internal sampling pump and through diffusion operation. Monitor is suited for confined-space applications in industries using electrochemical, catalytic, IR, and PID sensing technologies. Read More

Chemical Processing & Waste Management, Sensors, Monitors & Transducers

GSM-60 Gas Sampling Monitor with Internal Pump and Sensors

March 11, 2015

The GSM-60 is a microprocessor-based gas monitor especially designed for use in industrial process, aerospace, pharmaceutical and semiconductor applications.  The system incorporates an internal sample draw pump and gas sensors.  The instrument can be custom configured with both internal and external sensors for monitoring a combination of gas parameters including VOCs, dew point, oxygen and... Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Aerosol Mass Monitor measures 4 ranges.

March 3, 2015

Weighing just 28 oz, Met One Model 831 provides data of 4 mass ranges (PM1, PM2.5, PM4, PM10) in one minute. Unit features 2 front-panel buttons that accompany rotary scroll wheel. Sample history is viewed on display or data may be exported via USB port using included software. Capable of storing up to 2,500 sample events, monitor operates on battery power for 24 hours of intermittent use and up to 8 hours of continuous use. Recharge time is 2.5 hours. Read More