Magnesium Elektron Powders North America (Reade Manufacturing Co.)
Manchester, NJ 08759
Sep 30, 2009 Using ultrasonic immersion detector, Elektron® Ultrasonix operator can ultrasonically check products to Aerospace Material Specification AMS 2154. Automatic ultrasonic flaw detection within immersion tank removes inherent operator error, enabling repeatable checking of material cleanliness. Supported by K-scan data acquisition and analysis software, machine is custom-built to check both round billet and flat plate or extrusions. Scanning envelope accommodates parts up to 3,000 x 1,000 x 450 mm.

Olympus NDT
Waltham, MA 02453
Dec 08, 2008 Designed with horizontal case and sunlight-readable VGA display, EPOCH 1000 Series features 6 kHz max pulse rate frequency with single-shot measurements, tunable square wave pulser, digital receiver, and digital filter sets for signal-to-noise clarity. Phased array imaging allows simultaneous inspection of multiple focal laws and various angles in single scan. Detectors are suited for inspections in oil, gas, and petrochemical as well as power generation, aerospace, and manufacturing.

GE Sensing
Billerica, MA 01821
Aug 25, 2008 Available in 3 upgradeable models, Phasor Flaw Detectors are suited for applications ranging from corrosion monitoring to defect detection and sizing. Portable phased array Phasor XS provides highest resolution and probability of inspection, while mid-level Phasor 16/16 Weld combines phased array and conventional capability and produces full color image scans that can be stored as jpg for remote analysis. Phasor CV offers conventional, single-channel ultrasonic flaw detection.

GE Sensing
Billerica, MA 01821
Aug 07, 2008 Phasec 3 is single-frequency instrument for crack and corrosion detection and conductivity and coating measurements, while Phasec 3s adds dynamic rotating inspection capability and Phasec 3d adds dual-frequency capability to 3s for inspection at 2 different depths. Devices feature ¼ VGA TFT display with choice of 8 color combinations to differentiate between stored and active signals. Units have onboard memory for 200 setups and 200 traces, USB connectivity, and battery life up to 6 hr.

Olympus NDT
Waltham, MA 02453
Jul 09, 2008 OmniScan® MXE flaw detector offers eddy current (EC) and eddy current array (ECA) technologies used to detect surface and slight subsurface defects in metallic structures. Included MXE v2.0 software offers interface with step-by-step Wizard Assistance Menu that accelerates calibration and setup of application parameters. Alarm features offer flexible setup conditions, and other features include raster scan function as well as seamless switch between EC inspection and ECA inspection.

Olympus NDT
Waltham, MA 02453
Nov 09, 2007 Capable of withstanding wide range of weather conditions and difficult inspection environments, EPOCH LTC comes in IP67-rated sealed case. EN 12668-1 compliant digital ultrasonic flaw detector features square wave pulser, selectable digital filtering, 1-110 dB gain range, peak memory, 0.001 in. measurement resolution, one gate with programmable alarm, and multicolor transflective LCD with full VGA resolution that offers readability from bright sun light to complete darkness.

Olympus NDT
Waltham, MA 02453
Oct 01, 2007 BondMaster 1000e+ is optimized to detect internal defects or delaminations in composite structures used for aerospace, marine, automotive, or manufacturing applications. In addition to sonic pitch-catch, mechanical impedance analysis, and resonance technologies, portable multimode instrument offers dual RUN2 displays that let operator monitor waveform data and flying dot display. Options are available for color and monochrome LCD or electroluminescent display.

GE Inspection Technologies, GmbH
Huerth 50354  Germany
May 11, 2007 To promote effective scanning of composite components and structures, Phasor XS is available with ultrasonic, phased array transducer that features 90% hard water acoustic material and 10% water gap. Portable instrument, compatible with various probes, can operate in conventional and phased array flaw-imaging modes. Latter allows detector to drive arrays with up to 64 elements, using any 16 of them to form virtual probe.

GE Inspection Technologies, GmbH
Huerth 50354  Germany
Dec 11, 2006 When used in phased array mode, portable Phasor XS offers up to 64 channels, and operator can electronically multiplex multi-element probe to achieve control over angle of inspection, amplitude, and depth-of-focus of each ultrasonic beam. Inspection image is presented as full color, sector B-scan on TFT screen, providing comprehensive data in real-time. In conventional mode, Phasor XS uses standard ultrasonic probes for traditional inspection, such as corrosion and thickness measurement.

Sonatest Ltd
Milton Keynes   United Kingdom
Oct 26, 2006 Building on Model 123W, which is used for training organizations, Sitescan Models 150S and 250S have DAC, AVG, AWS, and API sizing techniques. Model 150S includes software features designed to optimize operator accuracy, including advanced measurement modes, full screen waveform display, and automated calibration function.

Sonatest Ltd
Milton Keynes   United Kingdom
May 30, 2006 Masterscan 350M and 380M feature acquisition systems with resolution and signal to noise ratio suited for ultrasonic testing. Along with direct daylight-visible, transflective color display, products feature keypad and user interface with full screen A-scan and menu navigation systems as well as drop down menu lists. Suited for single-channel system applications and portable scanners, 380M also has interface trigger, backwall echo attenuator, and high PRF.

Magnetic Analysis, Corp.
Mount Vernon, NY 10550-4403
Jan 23, 2006 Designed for flaw detection as well as measurement of wall thickness and OD of tubes and pipes, Echomac® FD-4 also reports ID dimensions, ovality, eccentricity, and wall variations. It is suitable for on-line or off-line inspections of tubes, bars, or plates, and utilizes EchoHunter software to configure each channel for any combination of thickness and flaw detection. System also features color printing of setups, waveforms, or strip chart recordings.

GE Inspection Technologies, GmbH
Huerth 50354  Germany
May 06, 2005 Protected against ingress of dust and strong jets of water, ultrasonic USM 35X is used for inspection tasks from flaw detection to corrosion measurement. Unit provides rotary knobs for setting gain and function values, and operator can select required dB step width, freeze displayed A-scan, or switch A-scan to full screen size by means of direct access keys. Software allows operation to meet Japanese weld inspection standard Z3060-2002.

GE Inspection Technologies, GmbH
Huerth 50354  Germany
Mar 30, 2005 Portable, PC-based USLT 2000B is operated as conventional flaw detector, displaying A-scans as well as DAC and DGS curves. Up to 4 selectable measurement values, such as sound path, projection distance, and depth and echo amplitude can be shown in measurement line. Battery-operated unit is available with optional software to allow saving, managing, and evaluation of inspection results for planning, control, and documentation of inspection process.

GE Inspection Technologies, GmbH
Huerth 50354  Germany
Mar 23, 2005 Suited for oil and gas sector, Model USM 35, with optional software, provides defect sizing in line with API 5UI recommendations. For operation, user finds crack, adjusts gain to 80% amplitude, presses USM freeze key, and moves probe to produce envelope curve. Software measures and remembers each amplitude peak and carries out time-of-flight calculations for each measurement to provide code-compliant sizing of flaw.

GE Inspection Technologies, GmbH
Huerth 50354  Germany
Mar 23, 2005 Model USM 32 is available in basic USB 32B version with max range of 55.9 in. in steel for standard applications, and USB 32L version with max range of 393.7 in. in steel for inspecting large components. Two spin-and-set rotary knobs allow rapid setting of gain and function values. Measuring 4.5 x 3.4 in., color LCD offers choice of color schemes and A-scan resolution of 320 x 220 pixels. Li-Ion batteries allow 10 hours of continuous use.

Uni-Tech Engineering
Pelham, AL 35124
Jun 08, 2004 Featuring UT probes, CCD video camera for V-Scan grid positioning, and industrial notebook PC with software, ShafTest® portable ultrasonic system provides repeatable in-situ testing of shafts and axles. Software highlights cracks and provides tools to plot ultrasonic cross-sections through shaft at any depth chosen by operator. System requires only shaft-end access, avoiding equipment disassembly or multiple setups and scans in confined situations.

i2S Line Scan
Niskayuna, NY 12309-0028
Nov 28, 2003 FLAW SCAN SYSTEM detects 0.3mm² defects on 2 m wide webs, running at 200 m/min. It contains embedded hardware and software with i2S technology for real-time defect detection on continuous web products. Features include real-time display and roll-map, statistical analysis of defect content, and power defect classification tool. Programmable alarm settings are offered for each defect class. Applications include paper, nonwovens, plastic films, metal-foil manufacturing.

Agfa NDT, Krautkramer Ultrasonic Systems
Lewistown, PA 17044
Oct 13, 2003 Models USN 58L, USN 58R, and USN 60 will run for at least 8 hours using Lithium Ion battery pack, which is contained in same battery tray and can be installed in the field via 4 knurled screws. Battery pack does not have to be removed to recharge and can be charged externally if spares are needed for continuous use. Charger also serves as AC power supply.

Agfa NDT, Krautkramer Ultrasonic Systems
Lewistown, PA 17044
Mar 13, 2003 Portable model USN 58L, with transreflective LCD display, offers 60 Hz update rate and two rotary operational adjustment knobs. It also includes .040–480 in. range in steel and 15–2,000 pulse repetition frequency. Unit's 4 damping settings and 10 frequency selections from 250 kHz to 25 MHz enable optimum matching to probe characteristics. Offerings include 2 independent flaw gates, memory for 200 stored data sets, and single-shot measurement technique.