Pickering Interfaces Inc
GRANTS PASS, OR 97526
Nov 18, 2009 Model 41-752 is 6-cell battery simulator that provides up to 300 mA of current from each cell, with output voltage from each adjustable up to 7 V. Each cell includes sense lines to optimize regulation performance and can be configured to operate as current sink in battery charging circuit of up to 100 mA. Independently controlled channels allow cells to be set to different output voltages to simulate different charge and capacity states.

PCT International Inc.
Gilbert, AZ 85233
Nov 05, 2009 Battery Testing and Charging System helps cable system operators test, re-charge, and redeploy batteries from EMTA deployments. Comprised of servers, testing software, and tester/charger, system can be stacked to service up to 192 batteries in one 19 in. rack. It provides complete testing and battery charging linearity test for 2-, 3- and 4-cell battery packs. System can also plot minute by minute charging reports; provide current and voltage curves; and test power drain linearity.

Mark-10 Corp.
Copiague, NY 11726
Oct 13, 2009 Offering all mechanical specifications of TSTM test stand, TST-DC/TSTMH-DC Motorized Torque Test Stand provides 100 lb-in. torque capacity. Modular unit includes fixture mounting plate and enables quick engagement and disengagement of samples. Stepper motor design prevents speed variation with load. Stand works with variety of force gauges offering capacities from 50 g full scale to 1,000 lb and capturing peak force in both tension and compression.

CAMI Research Inc.
Acton, MA 01720
Oct 02, 2009 Permitting testing for insulation resistance/dielectric breakdown, HVX hipot module checks for opens, shorts, mis-wires, and resistance limits. It applies selectable voltage from 10-1,500 Vdc or 10-1,000 Vrms AC to each connection group in cable. System produces reports for each cable showing parameters such as test voltage, leakage current, and more; denoting PASS or FAIL on top. Safety features include administrator login and automatic halt of test if current exceeds 1.5 mA.

Mark-10 Corp.
Copiague, NY 11726
Aug 12, 2009 With rugged aluminum housing, RG smart load cell is designed for integration in to assembly systems, weighing systems, and process automation and testing automation applications. It is controlled by commands sent from PC/PLC thru its RS-232 connector. Device has ASCII command library that allows for functions including peak force recall, set points, data averaging, data filtering, and calibration. Module is offered in capacities of 2-200 lb.

Mark-10 Corp.
Copiague, NY 11726
Jun 23, 2009 Offering capacity of 1,200 lb, Wedge Grip features hardened serrated steel jaws that are opened with ergonomic spring loaded knob and rack-and-pinion type mechanism. Jaws ride on rollers instead of sliding along surface of housing, preventing jamming. Additional features include thru slot for samples of unlimited width, and optional swivel adapter that provides proper sample alignment in pull testing applications.

FasTest, Inc.
Roseville, MN 55113-1317
May 05, 2009 Capable of sealing outside diameters down to 0.015 in., ME001 Series is designed for leak testing of infusion set and drug delivery devices. Connectors have 0.84 in. OD to mount in limited space locations, and pneumatic actuation, which is suited for soft touch control of delicate components.

Multi-Contact USA
Santa Rosa, CA 95403
Jan 21, 2009 Used where clamping is not possible, magnetic adapters safely attach test leads onto screw heads. Adapter tip consists of bar magnet between 2 steel poles for optimal adhesion, and slightly concave shape of magnetic tip ensures optimal contact. Two versions are available, with 7 or 11 mm dia magnets, and both have rigid insulated socket for push fitting onto standard 4 mm dia spring-loaded plug with rigid insulating sleeve. Respectively, they are rated 1,000 V CATIII and CATIV.

B & K Precision Corp.
Yorba Linda, CA 92887
Jan 06, 2009 Measuring 3.5 x 6.9 x 11.10 in., Model 8540 DC Electronic Load can operate in constant current (CC), constant voltage (CV), or constant resistance (CR) mode. It may be used on bench as well as production floor to measure and display voltage/current or resistance/power values in real-time. Operation covers 0-60 V, 1 mA to 30 A (150 W max), range and allows up to 400 instrument settings to be saved. High-resolution (0.1 mA/1 mV) voltage and current measurement lend to accurate results.

Megger
Dallas, TX 75237
Dec 15, 2008 Suited for use in testing and certifying industrial electrical installations, MFT1553 allows test results to be downloaded directly to laptop computer, handheld PC, or even smartphone running Powersuite software. Unit provides facilities which include continuity testing with adjustable-threshold buzzer, continuity measurement up to 99.9 kW, automatic RCD testing, and insulation testing at up to 1,000 V.

Sakor Technologies, Inc.
Okemos, MI 48864-3547
Aug 04, 2008 Available with voltages of up to 1,000 Vdc, Hybrid Vehicle Battery Test System is driven by DynoLAB(TM) EM controller to automate all types of performance and continuous cycling operations, including full road load simulation. It has line-regenerative dc power source, which helps regenerate absorbed power in ac mains during discharge mode. Featuring size range from ±200 to ±2,400 A (continuous), units offer overload (surge) currents of up to 200% of rated current.

Agilent Technologies, Inc
Santa Clara, CA 95051
Apr 03, 2008 DisplayPort receiver physical layer compliance test solution enables design and margin analysis where repetitive measurements are required for temperature and design variability. It includes W2641A DisplayPort adaptor, device for controlling auxiliary channel, J-BERT N4903A or ParBERT 81250A, and N5990A test automation software. Controlled from Windows XP® PC, it supports digital high-speed bus compliance test software modules for PCI EXPRESS®, USB, SATA, HDMI, and DisplayPort.

Xantrex Technology, Inc.
Livermore, CA 94551
Feb 27, 2008 Utilizing SmartWave Source to provide ac/dc waveforms, Elgar Aviation Compliance System (EACS) offers electrical compliance and EMC testing of electrical/electronic components. It includes digital oscilloscope, software test suite, and applications software. Test suites are available for Boeing 787 (B787-787B3-0147 specification), Airbus A380 (ABD100.1.8), and Airbus A400M (AMD24T). EACS provides stimulus, input measurement, device measurement, and report generation.

Elma Electronic Inc.
Fremont, CA 94538
Feb 22, 2008 Engineered for test/debugging, E-Frame Open Access Test Chassis does not have side or back walls around card cage area, leaving it open for easy access. It is designed with high power and cooling requirements for VPX (VITA 46/48) systems. With rugged modular aluminum construction, E-frame tower can support up to 21 or 17 slots at .8 and 1 in. pitch, respectively. Unit also features rear A/C PEM (Power Entry Module) with fuses, GND Stud, and front located ESD jacks.

Seco-Larm
Irvine, CA 92606-5012
Oct 19, 2007 CA-1610-3FLQ Male Plug, CA-1510-3FLQ Female Jack, and CA-1615-06LQ Test Light/6 in. Extender illuminated power connectors feature built-in LED for troubleshooting of CCTV and access control products. Blue light indicates correct polarity DC, red indicates incorrect polarity DC, and purple indicates AC power. Operating in 5-30 Vac/Vdc range, devices have illumination that glows from all directions to indicate voltage.

Aeroflex Laboratories
Plainview, NY 11803
Oct 03, 2007 Synthetic Multifunction Adaptable Reconfigurable Test Environment (SMART^E 5000(TM)) can adapt to test applications in EW, radar, communication, navigation, and identification, military ATE, and microwave test applications. It features synthetic stimulus and measurement channels to 40 GHz in configurable modular bands, power settings and measurement range of -90 to +10 dBm to better than 0.1 dB resolution, digital I/O up to 400 MHz at DDR, and LVDS with programmable levels up to 100 MHz.

FasTest, Inc.
Roseville, MN 55113-1317
Sep 04, 2007 Featuring chamfered seal design, MITC Series Twistmate is designed to seal and test threaded ports on round parts such as regulators, bowl filters, and tanks. With full flow design that minimizes production losses from scrap, retesting, and rework, connector seals threaded ports without wrenches or thread sealant with twist-in motion. Device is available for 1/8 and 1/4 in. NPT threads and as plug, non-swivel, or swivel connector.

Slaughter Company
Lake Forest, IL 60045
May 01, 2007 Multifunctional 6330 offers test modes for AC Hipot, DC Hipot, Ground Bond, Insulation Resistance, Functional Run, and Line Leakage. In Functional Run mode, unit can monitor min and max readings for voltage, current, power, power factor, and leakage current. This allows manufacturers to ensure DUT is operating as intended. Tester offers 10 memory locations, with 20 steps per memory, and single step mode. For remote testing, 6330 has PLC remote control with safety interlock.

Duncan Instruments Canada, Ltd.
Toronto, ON M9L1Z8  Canada
Apr 04, 2007 Model PSI 8031FC Safety-Fused Open-Phase/Phase Sequence Indicator features red, white, and blue fused test leads/crocodile clip assemblies, each rated at 600 V, ½ A, for connecting to ac power lines. Device has 110-600 V operating voltage, with dielectric strength of 5,550 Vac for 1 min and time limit of ac voltage above 500 Vac of 5 min. At 106 x 75 x 40 mm, dual function tester/indicator is housed in fire-retardant plastic and weighs 350 g.

Keithley Instruments, Inc.
Cleveland, OH 44139 1891
Jan 10, 2007 To facilitate plug-and-play operability with existing applications, KPCI-488LP includes driver library that is fully command-compatible with Keithley, Capital Equipment Corporation, and National Instruments(TM) command sets. This 3.3 and 5 V PCI-bus compatible GPIB controller interface plug-in board also includes full- and half-height brackets for use with low-profile PCs and provides complete software support for Windows XP/2000 and Windows VISTA upon release.