Rohrback Cosasco Systems
Santa Fe Springs, CA 90670
Jul 06, 2009 Ensuring piping assets are monitored against underprotection from corrosion damage, Cosasco® Side-Stream Assembly monitors parameters such as metal loss, corrosion rate, erosion rate, pressure, temperature, flow, and bacterial activity. Multiple 1 in. tees are included, which can be configured with Microcor® corrosion/erosion rate measuring, Corrater® LPR and galvanic measuring, Bio-probes, and process parameter measuring systems. Corrosion/process data is provided within minutes.

Rohrback Cosasco Systems
Santa Fe Springs, CA 90670
May 05, 2009 Microcor Wireless Transmitter uses high-resolution metal loss measurement that provides 18-bit resolution and is rated for operation in hazardous locations in temperatures from -40 to +70°C. Based on Microcor® technology, unit provides accurate corrosion rates in any process media in real-time. Each device will work as node in self-organizing mesh network to ensure consistent delivery of data and provides adaptive solution for data transfer.

Rohrback Cosasco Systems
Santa Fe Springs, CA 90670
Apr 27, 2009 Available with Hazardous Area Certification, Microcor® Wireless Transmitter provides corrosion rates in any process media at speeds approaching real time. Unit uses high-resolution metal loss measurement, providing 18-bit resolution and operating from -40 to 70°C. Transmitter works as node in self-organizing network to ensure consistent delivery of data. In event temporary obstruction blocks direct connection, network automatically reroutes signal to adjacent device.

Koslow Scientific Co.
Englewood, NJ 07631
Nov 19, 2008 With no size limitation to test piece, Model 2026 Passivation Tester measures corrosion tendency of stainless steel surfaces. Unit detects surface free iron through galvanic process, which is measured as voltage. Measurement can be repeated over surface of test part and at sensitive spots, such as seams and welds. In addition to all chromium containing stainless steels, Model 2026 is suited for use with precipitation-hardened steels such as 17-4, 15-5, and 17-7.

Rohrback Cosasco Systems
Santa Fe Springs, CA 90670
Nov 13, 2008 Suited for small scale systems or as building block to full ICMS3 Corrosion Management System, Intelligent Interface Unit provides real-time corrosion rates, erosion rates, and pitting tendency in water systems. System integrates RCS digital Microcor, Quicksand, and Corrater corrosion monitoring transmitters to or through SCADA or DCS system. With Symantec PC Anywhere or Microsoft remote desktop, users can access data systems for configuration and graphical interface remotely.

Rohrback Cosasco Systems
Santa Fe Springs, CA 90670
Oct 20, 2008 Using Soil Corrosion Rate Monitor, pipeline operators can quantitatively determine soil corrosivity for External Corrosion Direct Assessment pre-assessment process at time of pipe excavation or inspection. Unit consists of soil corrosion rate probe with replaceable cone shaped tip, and electrochemical Corrater® Aquamate LPR instrument, which includes Solution Resistance Compensation to extend range of soils in which measurements can be made.

Roctest, Ltd.
Saint-Lambert, QC J4P2P4
Sep 29, 2008 Designed to detect and predict onset of steel corrosion in concrete, SensCore system consists of sensors, dataloggers, and measurement hub that concentrates data from several dataloggers and transmits it to central database. Sensors transmit their data wirelessly to measurement hub, eliminating need to install any wiring in the structure to be monitored. Modular system is adaptable to structures of all sizes, and can be installed in both new and existing structures.

GE Sensing
Billerica, MA 01821
Sep 18, 2008 Featuring TFT color screen, 1 Gb memory, and 80 Gb hard disk, Pulsec uses pulsed eddy current (PEC) to deliver diagnostic imaging and depth resolution needed when inspecting multi-layer aircraft structures. Non-destructive tester has 6 hr battery life, weighs 13 lb, and is suited for inspecting difficult to reach places on aircraft. It can also detect cracks and offers on-board, real-time analysis and data recording/storage as well as export capabilities.

Pepperl+Fuchs
Twinsburg, OH 44087
Sep 12, 2008 Complementing CorrTran® MV online corrosion monitoring transmitter, Division 2/Zone 2 CorrTran® Corrosion Data Logging System allows users to access real-time corrosion data via Ethernet, USB, SD card, or locally via videographic chart recorder. System includes KFD2-HLC-EX1.D HART loop converter, which receives HART data from CorrTran MV corrosion monitor and delivers three 4-20 mA outputs that represent general corrosion, localized corrosion, and conductance.

Pepperl + Fuchs, Inc.
Twinsburg, OH 44087 2245
Dec 16, 2004 CorrTran Transmitters satisfy Class I, Division 2 hazardous location applications. They allow users to monitor effectiveness of corrosion inhibitors online, and detect and correct corrosion issues through upkeep and preventive maintenance. Units feature 2-wire, loop-powered 4–20 mA signal with HART protocol. Through these signals, general corrosion or pitting of pipe or vessels can be detected. Various probe styles and materials are available.

Atlas Material Testing Technology LLC
Chicago, IL 60613 1831
Jan 20, 2004 Model CCX Advanced Cyclic Corrosion Cabinet with 90°C option features temperature-resistant materials for dispersion towers and connectors, temperature-resistant fiberglass shell and gel coat, fiberglass cover with tempered-glass viewing window, and insulation around exposure zone. Unit replicates stresses that result in degradation including salt-saturated air and salt spray, high humidity, condensation, sunlight, and temperature variations.

USFilter's Stranco Products
Bradley, IL 60915 0389
Jun 07, 2002 CoolSIMâ„¢ on-line cooling water management tool measures electrochemical noise that takes place with transfer of electrons that create corrosion. This allows facilities to monitor system corrosion, pitting, and fouling in real time, under actual flow and heat transfer conditions, and therefore optimize chemical treatment programs. It recognizes when corrosion and pitting begin to occur in heat exchanger, and when corrosion and pitting activity stop.