Fluid Components Intl.    San Marcos, CA 92069 5115
Nov 15, 2006 FlexSwitch® Flow/Level/Temperature (FLT) Pump Protection Flow Switch helps prevent overheating caused by sudden, unexpected reductions in media flow rates. Capable of monitoring substances such as liquids, gases, and slurries, solid-state product offers dual alarm capability for low-flow (0.01-3 fps) and dry running conditions. Dual-function instrument, specified in insertion or in-line styles, features two 6 A relay outputs assignable to flow, level, or temperature.

Laurel Electronics, Inc.    Costa Mesa, CA 92626
Nov 13, 2006 Designed for pulse rates from 0.05 Hz-1 MHz, UL-rated Laureate Model FRR counter can add, subtract, divide, and multiply 2 independently scalable pulse or AC input channels. Universal dual-channel signal conditioner accepts magnetic signals from 12 mV-250 Vac as well as signals from proximity switches with PNP or NPN output, TTL or CMOS logic, and contact closures. Built-in isolated 5, 10, or 24 Vdc excitation supply for powering proximity switches and other sensors is included.

CyberTouch    Newbury Park, CA 91320-2232
Nov 10, 2006 Designed for desktop, wall-mount, and VESA arm-mount applications, Orion 19 touch screen LCD monitor is suited for banking, entertainment, hospitality, kiosk, and point-of-purchase applications. Utilizing NEC LCD 195WVXM MultiSync flat-panel monitor, 19 in. diagonal unit features 16:9 aspect ratio that allows designers to display more information on one screen and reduce number of screens while increasing interactive efficiency.

Ingen Technologies, Inc.    Calimesa, CA 92320
Nov 07, 2006 Suited for use in hospitals, outpatient therapy, nursing homes, and emergency response facilities, OxyView(TM) pneumatic flow meter delivers confirmation of actual continuous flow and volume of oxygen. Lightweight, pneumatic gauge is attached to oxygen tubing just below neck and can be engaged between nose or mouth-mounted cannula where compressed oxygen supply is delivered to cannula through flexible conduit.

Sun Surveillance, Inc.    Greer, SC 29651
Oct 31, 2006 Providing detailed view of pin placement on elevated green as well as other golfers who may be playing ahead on the same hole, CaddyCam wireless solar-powered golf course monitoring system is comprised of two 10 ft pole structure units. Camera, transmitter, and solar panel form the camera unit, which is typically located to the side of fairway. Monitor unit supports mounted receiver, solar panel, and enclosed color LCD monitor, and is positioned by tee box or cart path.

Packet Island Inc.    Santa Clara, CA 95051
Oct 30, 2006 Developed to meet scalability and deployment needs of VoIP service providers targeting SMEs, PacketSmart(TM) VoIP Lifecycle Management solution eliminates need for truck rolls and on-site technician time. Its purpose-built micro-appliances work with scalable SaaS platform, PacketSmart, hosted at Tier-1 data center. Once deployed within SME network, micro-appliances allow remote multi-day VoIP network assessment and remain to monitor and report detailed metrics on all VoIP calls.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Oct 27, 2006 Suitable for FOUNDATION Fieldbus and Profibus installations, Advanced Diagnostic Module for FieldConnex® Power Hub generates network documentation for each segment and device and controls fieldbus by monitoring physical layer. Built-in oscilloscope can be set to trigger on numerous events, allowing maintenance personnel to pinpoint fault locations from control room utilizing Device Type Manager. During commissioning, ADM makes snapshot of communication quality for trending changes over time.

MarkMonitor    San Francisco, CA 94105
Oct 27, 2006 Utilizing holistic, end-to-end, lifecycle approach, Online Channel Protection Service helps companies prevent revenue loss, minimize brand erosion, and preserve customer and channel relationships due to unauthorized selling of branded goods online. It monitors global auction sites, B2B exchanges, e-mail solicitations, and e-commerce and pay-per-click sites, looking for counterfeit or gray market activity. When discovered, service helps companies take action to protect intellectual property.

Digital Monitoring Products    Springfield, MO 65803
Oct 26, 2006 Suited for retail and residential applications, XR100 Series features 142 zones, 8 individual reporting areas, and up to 8 supervised door access points and/or keypads. Installers and service technicians can fully program system and run diagnostics from any DMP LCD keypad. Panel accepts software updates from remote location using Remote Link(TM) software. Network version XR100N is suitable for multi-site applications where Internet or LAN/WAN is available.

Sonatest Ltd    Milton Keynes   United Kingdom
Oct 26, 2006 Building on Model 123W, which is used for training organizations, Sitescan Models 150S and 250S have DAC, AVG, AWS, and API sizing techniques. Model 150S includes software features designed to optimize operator accuracy, including advanced measurement modes, full screen waveform display, and automated calibration function.

RJG, Inc.    Traverse City, MI 49686-4713
Oct 26, 2006 Interfacing between thermocouple temperature sensors and eDART System(TM), Lynx Quad Temperature Module enables eDART to monitor mold, machine, and auxiliary equipment conditions using temperature. Unit converts signals from analog to digital and is available for Type J or Type K thermocouples. Some applications that can be monitored include barrel/mold/nozzle temperature, coolant, and dryer temperature.

Enmet Corp.    Ann Arbor, MI 48106
Oct 25, 2006 Used to monitor carbon monoxide and dew point, MedAir 2200 compressed air line analyzer offers 4-20 mA outputs, relays, and RS 232/RS 485. Product is UL approved to UL 60601-1, IEC 60601-1, and CSA 22.2 No. 601.1.

Sensicast Systems    Needham, MA 02494
Oct 25, 2006 Suited for industrial and commercial enterprises, SensiNet® services let plant/facility managers and operators gain access to temperature and energy monitoring applications over Internet. With secure, automatic, real-time M2M connectivity to SensiNet wireless sensor networks, users can remotely receive data on any web-enabled device, then track and act on information. Services include user-configurable alarms and alerts as well as customizable data analysis and reports.

Applied Innovation, Inc.    Dublin, OH 43016
Oct 25, 2006 AIdirector v2.0 client-server application provides remote site intelligence capabilities to field technicians and regional operations centers. Capable of capturing alarms and events from IP or non-IP remote devices, Event Director module enables users to pinpoint problems and make instant diagnoses, while Power Director module offers management and automated reporting for power-related equipment, allowing users to monitor failures and out-of-spec conditions.

WEi    Elk Grove, IL 60007
Oct 24, 2006 Pre-configured to work with RS232 bar code readers, Mantis requires no programming or configuration. It can use CCD cameras as well as laser-based bar code scanners to perform go/no-go print quality analysis as well as match code functions for 100% automated bar code verification. As Ethernet client, Mantis logs data regarding start and stop times, errors, production counts, and personnel information.

Jumpnode Systems    Minneapolis, MN 55401
Oct 19, 2006 Suited for small and medium businesses, Jumpnode Monitoring Solution combines appliance-based architecture with hosted services to deliver network and systems information in real-time from any web browser. It helps administrators manage complex networks by tracking network activity and proactively reporting issues before they become problems. Service-oriented solution also offers backup analog modem functionality and data retention for long-term trend analysis.

SCO Group, The    Lindon, UT 84042-1911
Oct 19, 2006 Enabling detection, diagnosis, and correction of common system problems, HipCheck(TM) allows users to monitor/manage Windows and UNIX servers and PC systems from any location through Windows Mobile(TM) phones. HipCheck Agent is installed on systems to monitor hardware and status, while Client GUI allows users to perform necessary administrative actions. Mobility Server acts as intermediary between Agents and Clients to ensure user authentication and secure data transfers.

MKS    Andover, MA 01810 2449
Oct 18, 2006 With ability to identify and correct process issues, SenseLink(TM) QM controls injection molding equipment used in manufacturing medical devices and other high-accuracy industrial applications. Evaluating part quality in real time, unit finds defects such as short/double shots, and flash/overall process drift. SenseLink QM utilizes multivariate analysis software with libraries for data acquisition, modeling, and run-time control.

I/O    Stafford, TX 77477
Oct 18, 2006 Incorporating ground electronics, central recorder, and operating system software, Scorpion® system supports multicomponent acquisition with digital, 3C VectorSeis® receivers and analog geophones. It handles high channel count surveys (full-wave/conventional) and accommodates complex spread and sweep management regimes. System acquires densely sampled, broadband P-wave and full-wave data with full offset and azimuth coverage.

Analytical Technology, Inc.    Oaks, PA 19426
Oct 12, 2006 Employing fluoride-sensitive ion selective electrode (ISE) sensor, A15/82 Fluoride Monitor measures continuous flow of sample and immediately displays fluoride concentrations from 0.1-1,000 ppm at monitor. Chemistry module offers sample conditioning for sensor, and electronics module is equipped with alarm and analog output functions. Based on 1-999 hr, user-defined frequency, system performs automatic calibration routine to correct for electrode zero drift.