AXIOMTEK Co., Ltd.    Taipei   Taiwan
Feb 26, 2008 Equipped with AMD LX800 processor, fanless embedded Model ICO-100 offers smart remote management tools, including remote monitoring, alarm, diagnosis, and security for use over wired/wireless network. Stacking design enables expansion through PC-104 slot or 2.5 in. hard drive. Featuring built-in fuse for over-current protection, RoHS-compliant device can be applied in limited-space applications and endure vibration and shock in critical environments.

AKCP Co. Ltd    Bangkok 10900  Thailand
Feb 26, 2008 Suited for use with Linux products including AKCP securityProbe units, Power Monitor Sensor is multifunctional power meter capable of measuring voltage, current, and energy usage in Watts on single-phase power line. It can work with 110 or 220 V supply voltages, with power sensor resolution of 0.1 A for measurements of rms current and 1 V for rms voltage. User can be alerted on sensor exceeding predefined threshold with various notification options.

Linear Technology Corp.    Milpitas, CA 95035
Feb 22, 2008 Designed for monitoring equipment with numerous supply voltage rails, 6-channel LTC2932 includes separate open-drain voltage comparator outputs. External resistive divider between bandgap reference output, ADC input, and ground determines which channels are set to preset or adjustable voltage monitor inputs. Offered in 20-pin TSSOP package, IC has adjustable reset timeout period as well as reset disable pin for margining applications. All channels feature ±1.5% max threshold accuracy.

Elma Electronic Inc.    Fremont, CA 94538
Feb 22, 2008 Engineered for test/debugging, E-Frame Open Access Test Chassis does not have side or back walls around card cage area, leaving it open for easy access. It is designed with high power and cooling requirements for VPX (VITA 46/48) systems. With rugged modular aluminum construction, E-frame tower can support up to 21 or 17 slots at .8 and 1 in. pitch, respectively. Unit also features rear A/C PEM (Power Entry Module) with fuses, GND Stud, and front located ESD jacks.

WAGO Corp.    Germantown, WI 53022
Feb 20, 2008 Operating as component of remote I/O or distributed control system, 12 mm wide 750-493 directly measures voltage, current, energy consumption, and power factor to calculate effective power and track energy consumption rates. Intelligent module, available in 1 and 5 A versions, offers 3 channels dedicated to voltage input and 3 channels dedicated to current input. It is compatible with 16 fieldbus networks and 300+ digital, analog, and special function modules found in WAGO-I/O-SYSTEM.

Linear Technology Corp.    Milpitas, CA 95035
Feb 20, 2008 Offered in MSOP-10 and 3 x 3 mm DFN-10 packages, LTC4151 utilizes internal 12-bit ADC to continuously measure high-side current and input voltage from 7-80 V to give true power reading. Single-chip solution has 2-wire, I²C-compatible interface that reports input power data, which can be delivered continuously or via no-latency single snapshot mode. Third low-voltage input can be used to measure voltage from thermistor/fuse, and max total unadjusted error for measurements is ±1.25%.

Complete Inspection Systems, Inc    Indialantic, FL 32903
Feb 20, 2008 Comprised of computer, imaging workstation, 12 megapixel camera, and software suite, Multicheck(TM) performs image and text comparisons, reads and verifies barcodes, and performs OCR on documents and applications with variable information. It can capture shadow-free image of any object up to 17 x 23 in. in diameter, under uniform lighting conditions. Database component enables master documents to be cataloged with inspection type and zones already set.

GigaFin Networks    Cupertino, CA 408-200-5700
Feb 20, 2008 Designed for fiber optic networks, FlowLine 500-F helps IT administrators detect, analyze, and prevent issues such as excessive or anomalous bandwidth usage, undesirable applications/traffic, and server attacks. There are 2 SFP ports for data and one dedicated combined port (SFP+RJ45) for out-of-band management, allowing connection over copper or fiber networks. Solution can be deployed transparently, inline or via TAP (passive monitoring mode), in any network environment.

Tsarfin Computing, Ltd.    Haifa 31070  Israel
Feb 20, 2008 NetGong v6.4 allows network administrators, webmasters, and Internet service providers to monitor any networked device on Internet, corporate Intranet, or TCP/IP LAN and receive alerts immediately via audible alarm, message, e-mail, or third-party software when connection fails. Software can be tailored to specific area of requirement, from single server to small-office LAN, to hundreds of devices within large corporate network. It is also suited for small businesses.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Feb 12, 2008 Delivering residual jitter below 100 femtosec and channel bandwidths to 35 GHz, Model 86108A is designed for verification of high-speed electrical communications systems. Integrated instrumentation-grade hardware clock recovery allows 86108A to trigger directly from single-ended or differential data signal, eliminating need for separate trigger input, while internal phase detector allows accurate measurements of PLL bandwidth, jitter transfer, and jitter/phase noise spectrum.

BMC Software, Inc.    Houston, TX 77042-2827
Feb 08, 2008 Designed to deliver preemptive, service-aware business service management for IT operations, BMC ProactiveNet Analytics early warning system alerts IT operations staff about impending performance abnormalities. It detects and prioritizes problems before they impact business-critical applications, service level objectives, or end users. Software continuously correlates thousands of data points from applications and devices monitored across IT infrastructure.

BW Technologies    Calgary T2A7X9  Canada
Feb 06, 2008 Featuring non-intrusive integrated sampling pump and SmartSample diaphragm pump technology, GasAlertMax XT simultaneously monitors hydrogen sulfide, carbon monoxide, oxygen, and combustibles. Powered by rechargeable batteries, tamperproof monitor comes with standard event logging and datalogging, and is compatible with BW MicroDock II automatic test/calibration system. Multi-language support is available in English, French, German, Spanish, and Portuguese.

Freewave Technologies, Inc.    Boulder, CO 80301
Jan 29, 2008 Offering range of more than 40 miles, 900 MHz Model FGRIO-S30 operates from 6-30 Vdc, delivering data over wireless link to RTU or PLC. Two analog outputs with 0-22 mA range enable wireless proportional control of devices, while 2 digital inputs with high-speed counters support devices such as turbine meters. With radio, users can remotely control and monitor tanks, lifting stations, pumps, flow meters, fluid levels, water sources, temperatures, and pressures.

RAE Systems    San Jose, CA 95134
Jan 29, 2008 Comprised of 0.1-100 ppm H2S model as well as 0-500 ppm and 0-1,999 ppm CO models, ToxiRAE 3 single-gas monitors suit oil, gas production, refining, steel, and first responder applications. Each has stainless-steel front cover, carries IP67 rating, and provides real-time results. Also available, AutoRAE Lite bump test and calibration station works with ToxiRAE 3 monitors to check proper alarm levels and calibrate as required. It provides 12 sec bump test or 2 min full calibration.

ZyAura    HsinChu   Taiwan
Jan 28, 2008 Implementing IR-SoC technology, ZG106A-M is built with minimal parts count and detects carbon dioxide (CO2) levels over 0-10,000 ppm range. It incorporates CO2 level alarm and extreme level indicator in addition to internal data logger that can record up to 24 hr of data. Unit is suited for scientific, commercial, and consumer applications in Indoor Air Quality (IAQ), HVAC, safety, other industries.

AlarmPoint Systems, Inc.    Pleasanton, CA 94566
Jan 23, 2008 Designed for up to 10 users, web-based AlarmPoint Express(TM) allows small IT organizations to identify and communicate critical IT events to appropriate staff for resolution. Program integrates with organization's existing incident-management systems, including applications for network management, performance monitoring, help desk operations, job scheduling, and security. When event occurs, AlarmPoint Express notifies groups via mobile phone, SMS device, pager, email, or other text-based device.

Antx, Inc.    Austin, TX 78720
Jan 18, 2008 Reporting to Internet applications based on exceptions and time, Messenger monitors up to 32 different Parameter Group Numbers (PGNs) using J1939 protocol at rates to 1.25 Mbps. It combines, GPS, GSM, CDMA cellular/Satellite modem, and CANbus communication as well as alarm notification. Supplied in palm-sized, watertight enclosure, solution connects directly to diagnostic port on diesel engine-based equipment and can continuously compare each monitored condition to 2 sets of limits.

Lancope    Alpharetta, GA Georgia 30022
Jan 18, 2008 Based on Linux-based StealthWatch System of appliances, Flow Replicator(TM) appliance is virtual User Datagram Protocol (UDP) switch that receives UDP packets, duplicates them, and sends them to appropriate destination based on user-configured rules. Users can specify destinations based on source IP, destination IP, and destination port. Unit is suited for large network management environments which require multiple NetFlow(TM), sFlow®, SNMP, or syslog collectors.

Smith's Detection    Danbury, CT 06810
Jan 18, 2008 Including wide variety of modular components, iLane checkpoint features HI-SCAN 6040aTiX high-performance multi-view X-ray inspection system that automatically detects and pinpoints explosives as well as liquid substances in carry-on baggage. Unit separates suspicious bags from those that are cleared, diverting them on to separate lane to defined re-inspection area. Tray return system automatically takes empty bins back to start of security lane.

Net Optics, Inc.    CA, CA 95054
Jan 16, 2008 LX4 Converter Tap provides LC, SR, and LR 10Gigabit based monitoring tools that can be leveraged across multiple 10Gigabit fiber networks within organization. Flexibility is delivered via use of 10Gigabit XFP monitoring port interfaces within LX4 Converter Tap chassis. IT operations staff can use existing 10Gigabit monitoring tool to safely baseline and measure traffic on LX4 networks. Same tool can also be leveraged across OM2 and OM3 fiber installations.