Sensors Monitors & Transducers ->
(Showing headlines 301 - 320) << 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 ...
MIG Welding System features weld monitoring software.
Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Nov 19, 2010
Axcess® E with Insight(TM) MIG welding system includes fully integrated data monitoring capability within the power source. System monitors each weld according to preset parameter limits, allowing user to detect missed weld, under-weld, and over-weld. Configurable software notifies user if weld has not met expectations for current, voltage, wire feed speed, gas flow, or duration. Insight Reporter(TM) provides critical data on cost, productivity, and quality to drive process improvement.
Remote Monitoring System offers real-time visibility.
Quest Controls, Inc.
Palmetto, FL 34221-4802
Nov 16, 2010
Powered from 24-48 Vdc, TELSEC® MINI can monitor up to 6 universal inputs including temperature, humidity, commercial power fail, DC plant alarms, HVAC failures, fire/smoke, and intrusion. Universal inputs accept digital contacts or any 0-5 Vdc or 4-20 mA sensors. Suited for cabinets, OTNs, shelters, small remote sites, and data switching and computer centers, monitor provides SNMP traps, sends information over Ethernet to alarm center, and supports email alarm messaging.
Audible/Visual Signal provides flashing, mounting options.
Federal Signal Corp., Signal Div./Electrical Products
University Park, IL 60466
Nov 15, 2010
Employing 60,000 hr LED light source and buzzer that outputs 85 dB at 10 ft, AV1-LED is available with amber, blue, green, red, and clear domes. Black base accommodates mounting of ½ in. NPT pipe, 4 in. octagonal electrical box, or any flat surface, and 100% polycarbonate housing is rated for Type 3R rain-tight applications. Capable of supplying independent flashing light and sounder operation, product allows LED to be field-adjusted for flash pattern of 60 or 75 FPM.
Condition Analysis Service optimizes equipment performance.
Key Technology, Inc.
Walla Walla, WA 99362
Oct 29, 2010
Designed for G6 optical sorters as well as G6 ADR® Automatic Defect Removal Systems, RemoteMD(TM) proactively monitors condition of equipment in real-time, assesses status, and alerts customer if problems are detected. With RemoteMD, secure 2-way remote session between sorter and Key service technician can be initiated. Basic level of RemoteMD, available as part of SelectPRO protection plan, includes system monitoring, alarms for critical events, remote diagnosis, remote fixes, and software management.
Position Monitor suits clam shell bucket applications.
Minnetonka, MN 55343 9108
Oct 28, 2010
Compatible with electrically, pneumatically, hydraulically, or manually driven shafts, SG1000E measures rotary movement up to 6 turns as well as repetitive linear movement. It come in explosion-proof NEMA 4X enclosure and suits rotary applications that require full-scale rotation and up to 6 full turns with full-scale sweep as small as 5.6°. Monitor can measure rotational position with end-to-end rotation of 360° before reversing/repeating and provides 4-20 mA output.
Warning Light enhances flexible manufacturing environments.
Banner Engineering Corp.
Minneapolis, MN 55441
Oct 28, 2010
Emitting flashing red signal from 50 mm dome that is visible from 180°, EZ-LIGHT(TM) K80 Call Light notifies stocking personnel when parts bin supplies need replenishing. This allows parts bins to be refilled before supplies are gone, allowing assembly and manufacturing line operators to sustain production rates. Able to be placed in any area of work cell, this LED-based light has pre-assembled housing, is powered by two 9 V batteries, and offers switch-activated operation.
Package Label Inspection System verifies content.
Microscan Systems, Inc.
Renton, WA 98057
Oct 20, 2010
Combining IP67-rated VS-1 Smart Camera and Visionscape® I-PAK® Software with NERLITE® lighting, optics, and accessories, VS-1 Track and Trace uses machine vision tools to read barcodes, perform OCR and OCV, and inspect labels for misalignment and skew. System is suitable for pharmaceutical product packagers that are required by FDA to check content and legibility of date and lot codes and are bound by GMP to verify that pharmaceutical packaging is correctly formed.
Branch Circuit Power Meter offers split-core CT option.
Palatine, IL 60067-7399
Oct 20, 2010
Designed to monitor branch circuits and mains in power distribution units and remote power panels, PowerLogic® BCPM is available with solid-core CT strips or split-core CT option for installation flexibility. Ability to monitor current from .25-100 A gives granular view of energy use and helps data center managers identify areas that are overused or underused. With customizable alarms, operators can set sensitivity parameters so alarm is triggered anytime load approaches breaker limit.
Portable Formaldehyde Monitor includes built-in memory.
Ann Arbor, MI 48106
Oct 20, 2010
Powered by battery or 110/220 Vac mains, direct reading Formaldemeter htV-m provides continuous stand-alone monitoring of formaldehyde from 0-10.00 ppm and storage of up to 1 month of data. Data can be downloaded directly to PC without need for additional hardware. For programming various sampling and data collection options, monitor can be connected directly to PC via RS-232 link. In addition to formaldehyde, unit also monitors temperature and relative humidity.
Branch Circuit Power Monitor is suitable for retrofit applications.
Palatine, IL 60067-7399
Oct 19, 2010
Square D® PowerLogic® Branch Circuit Power Meter (BCPM) series monitors branch circuits and mains in PDUs and remote power panels, providing granular view of power and energy use for maximum data center uptime, cost allocation, and infrastructure optimization. Nominal solid-core CT strips provide low-current monitoring from .25-100 A, and split-core CT option enables installation inside or outside any major manufacturer's PDU or remote power panel. Customizable alarms are standard.
Universal Transmitter monitors industrial vibration 24/7.
IMI Sensors, Div. of PCB Piezotronics
Depew, NY 14043-2495
Oct 11, 2010
Designed to protect critical rotating equipment, DIN rail-mounted 682A16 provides loop power for 2-wire, 4-20 mA sensors and ICP® excitation for analog 8-120 mV/g accelerometers. It also works with existing PLC, DCS, and SCADA systems leading to alarm, control, or shutdown. Available with optional detachable front panel LCD and programmer, transmitter also accepts various sensor input signals: mA, thermocouple, RTD, linear resistance, and potentiometer.
Torque Testers accept expanded variety of torque tools.
Copiague, NY 11726
Oct 11, 2010
Designed to test hand-operated torque screwdrivers, wrenches, and other tools, STA Torque Tool Testers feature solid aluminum housing for years of service in production or laboratory use. Universal receptacle with square drive and grooves accepts common bits and attachments. Available in 12, 50, and 100 lb-in. capacities, testers provide ±0.5% ±1 digit FS accuracy. Units capture peak torque in both clockwise and counterclockwise directions and offer selectable units of measurement.
Digital Force Gauge suits QC, manufacturing, and R/D areas.
Copiague, NY 11726
Oct 07, 2010
Designed for tension and compression force testing, Series 4 includes capacity ranges from 0.12-500 lb and is accurate to better than ±0.2% FS. Sampling rate of 3,000 Hz produces accurate results, even for quick-action tests; backlit LCD displays legible characters; and menu navigation accelerates access to gauge features and configurable parameters. Along with data output via USB, RS-232, Mitutoyo (Digimatic), or analog, gauge offers on-board data memory for up to 50 readings.
Digital Transducer provides smart distribution monitoring.
Schweitzer Engineering Laboratories Inc.
Pullman, WA 99163
Sep 29, 2010
With SEL-734T, system operators can assess state of entire distribution system in real-time, isolate disturbances, and switch on power condition equipment by issuing remote commands. Instantaneous disturbance reporting helps minimize response times and prevent future disturbances. Providing seamless communications integration with optional Ethernet port and DNP3 communications protocol, transducer is available with fully sealed, NEMA-rated enclosure.
Coker Drum Safety System targets crude oil refineries.
Houston, TX 77034
Sep 29, 2010
Monitoring overhead pressure, overhead temperature, and inlet temperature, Coker Drum Safety System automatically inhibits opening of valves under unsafe process conditions, preventing release of hydrocarbons and/or hydrogen sulfide in crude oil refineries. CDSS logic solver makes sure in-service drum is not opened to atmosphere, or that open drum is not placed in service. Suitable for use up to SIL-3, CDSS is rated for -30 to 75°C operation and meets Class I Div II requirements.
I2C Temperature/Voltage Monitor enhances system operation.
Linear Technology Corp.
Milpitas, CA 95035
Sep 24, 2010
Intended for 3 and 5 V systems, LTC2990 incorporates 14-bit ADC, 10 ppm/°C voltage reference, and I²C digital interface in one RoHS-compliant, 10-lead MSOP to provide submillivolt voltage resolution. Design enables configuration of 4 single-ended voltage inputs to measure any combination of internal temperature, remote temperature, remote voltage, and internal VCC for single or repeated measurements. Respectively, internal and remote measurement accuracies are +1°C and +0.5°C.
Network Management Appliance suits mid-market organizations.
Visual Network Systems
Colorado Springs, CO 80920
Sep 22, 2010
Providing both application and network performance management, VPM Xpress includes cause and effect analytics driven by IntelliTrace(TM), which provides users with transaction and trace analytics based on application performance event or degradation in service delivery. System features data correlation engine that processes information from multiple sources, and provides summarized dashboard reporting of application and network environment. More than 93 preconfigured applications are included.
Process Monitoring System aids injection molding QA.
Kistler Instrument Corp.
Amherst, NY 14228 2119
Sep 16, 2010
Offering 4 inputs for piezoelectric pressure sensors, CoMo Injection Basic provides injection molders with point of entry to cavity pressure measurement. System visualizes injection process; carries out QA monitoring of max pressure reached in cavities; and controls one device, such as reject diverter or robot, that separates parts evaluated as defective. Several upgrades are available, and operation/visualization is possible via 12.1 in. TFT color touch display Type 5629A3 or PC.
Heat-Trace Control is available with power line interface.
Tyco Thermal Controls
Menlo Park, CA 94025
Sep 16, 2010
DigiTrace NGC-30 Heat-Trace Control and Monitoring System features Power Line Carrier Interface (PLI) Technology that enables temperature information to be transmitted through heat-tracing cable and power distribution wiring. PLI Technology utilizes electric heat-tracing cable as data cable, eliminating need to install additional RTD wiring to collect pipe temperature or electrical continuity data. Touchscreen interface facilitates operation.
Data Logger monitors illuminance, UV, temperature, and humidity.
TandD US, LLC
Saratoga Springs, NY 12866
Sep 09, 2010
Operating on 1 AA battery, 4-channel Model RTR-574 measures luminosity from 0-130 k lx, UV from 0-30 mW/cm², relative humidity from 10-99%, and temperature from 0-55°C. Wireless unit can store up to 8,000 readings x 4 channels for total of 32,000 readings in one-time or endless recording mode. Measuring 2 x 3 in., logger supports automatic downloading of logged data, real-time monitoring, and warning notifications by email or text to cell phone.
(Showing headlines 301 - 320) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79