Mettler Toledo, Inc.    Columbus, OH 43240
Apr 18, 2011 Tablex-PRO, powered by Safeline PowerPhasePRO software, detects particles smaller than 0.2 mm in dia, including stainless steel and irregular shaped contaminants such as slithers of metal and broken sieve wires. Dual level electronic signature log-in system captures and stores all access activities, providing full regulatory compliance with 21 CFR part 11. Inspection process traceability is supported through barcode and batch code information within the data collection and storage system.

Advanced Thermal Solutions Inc.    Norwood, MA 02062
Apr 15, 2011 Used to profile heat sinks, components, and PCBs, iQ-200(TM) simultaneously measures temperatures for solid materials and surrounding air in addition to tracking air velocity and air pressure at multiple points. Laboratory instrument accommodates inputs from up to 12 J-type thermocouples, 16 air temperature/velocity sensors, and 4 DP sensors. USB interface allows PC-based data management, storage, and sharing, while software manages incoming data and provides graphic presentation.

Televac/ETI    Huntington Valley, PA 19006
Apr 14, 2011 Direct, gas independent 1E Piezo Diaphragm Vacuum Sensors provide vacuum range of 1-1,000 Torr, while 1F sensors have range of 1-7,600 Torr. Both units feature nickel plated brass or stainless steel bodies with choice of 1/8 in. NPT, NW, or CF connections. They can be used with Televac's MM200 dual display, half-rack Modular Vacuum Gauge, which can include combinations of hot and cold ionization, thermocouple, convection, diaphragm, set point relays, and RS232/485 digital communications.

SightLogix, Inc.    Princeton, NJ 08540
Apr 12, 2011 Suited for temporary and long-term security applications, self-contained Video Security Trailer accurately detects pedestrians or other intrusions. Ruggedized system comes equipped with long-range SightSensor video analytic detection cameras, electronic pan/tilt positioning units, solar panels, backup batteries, and optional wireless communications. Onboard power generation works in wide range of operating environments, from desert to arctic deployments.

General Monitors    Lake Forest, CA 92630
Apr 11, 2011 Able to detect 0-500 ppm hydrogen levels, TS4000H employs electrochemical hydrogen sensor with T90 response of under 30 sec and minimal zero shift. Unit is unaffected by short-term, less than or equal to 2.5 min, exposure to hydrogen concentrations up to 50% LEL. Features include 4-20 mA output, 8 A relays, HART or Modbus communications, and 3-digit LED display for concentration readings and fault codes. Unit can also be configured to detect other toxic gases.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Apr 11, 2011 With small lug mounting space of 0.1 in.², NTCALUG03 Series provides accurate measurements over temperature range of -40 to +125°C. Units feature 5.5 mm ring tongue that can be mounted with M2 screws or American studs. Small dimensions, when combined with silver-plated nickel conductor, result in low thermal gradient of less than 5% of ΔT. Thermistors feature R₂₅ of 10 kW, 12 kW, or 47 kW, with tolerances of ±2 % and ±3 %.

Measurement Specialties, Inc.    Hampton, VA 23666
Apr 11, 2011 Featuring 316L stainless steel wetted parts, Model D5100 has 2 pressure ports for high and low pressures and is available with amplified or mV output. Amplified model is CE certified and includes reverse polarity wiring protection. Comprising piezoresistive differential pressure sensor and electronics of UltraStable(TM) pressure transducer, Model D5100 offers pressure linearity as low as ±0.1%, operating temperature of -40 to +125°C, and various output/fitting/electrical configurations.

Keithley Instruments GmbH      Germany
Apr 08, 2011 Offering 4-quadrant voltage and current source/load coupled with precision voltage and current meters, SourceMeter® Model 2651A characterizes high power electronics. Unit can source or sink up to 2,000 W of pulsed power or 200 W of DC power. It can also make precise measurements of signals as low as 1 pA and 100 µV at speeds up to 1 µs per reading. For precise characterization of both transient and steady-state behavior, Model 2651A provides choice of digitizing or integrating measurement modes.

Endress + Hauser Inc.    Greenwood, IN 46143
Apr 08, 2011 Using both capacitance and guided wave radar technologies, Levelflex FMP55 measures overall level of liquid and interface between 2 liquids. Unit will automatically switch between technologies to provide concise interface measurement, even in presence of emulsion or rag layers. Operating in process temperatures of -58 to 392°F and in pressures from -14.5 to 580 psi, Levelflex FMP55 offers measuring range up to 33 ft and provides 4-20 mA with HART output signal.

Econolite Group, Inc.    Anaheim, CA 92806
Apr 07, 2011 Autoscope® ENCORE(TM) provides comprehensive traffic information necessary for intelligent transportation systems. Features include browser navigation, data collection, Internet access via web server, and software development tools. Dual-core DSP, with RISC machine processing, enables unit to process images in real-time to detect vehicle traffic, extract data, and transmit detector outputs while simultaneously streaming MPEG-4 video output. Product operates in all weather and lighting conditions.

Acromag, Inc.    Wixom, MI 48393 7037
Apr 06, 2011 Model ST132 thermocouple/millivolt signal conditioner converts sensor input signals from 8 thermocouple types or ±100 mV range and output proportional 4-20 mA process control signal. Device is output loop-powered, 7-32 Vdc 2-wire transmitter that mounts in DIN Form B sensor heads or on DIN rail. Offering response time as low as 8 msec, it performs signal linearization and cold-junction compensation functions. Unit has 24-bit A/D controller that supports -40 to +80°C temperature range.

Concept Controls    Calgary, AB T2E7C7  Canada
Apr 06, 2011 Featuring IP66/67 outer housing, 4-gas GasAlertMicroClip XT offers continuous visual display of select gases, including carbon monoxide, hydrogen sulfide, oxygen enrichment and deficiency levels, and combustible gas levels. Unit offers 180-day calibration cycle and IntelliFlash(TM), which indicates if monitor fails to comply with designated standards. As disposable, single-gas detector, GasAlertClip Extreme does not require calibration and can be activated for 2-3 years.

Clark Solutions    Hudson, MA 01749
Apr 05, 2011 To aid in accounting for energy usage as well as allocation of costs to end users, Model DN-EM BTU/Energy Monitor measures thermal energy flow rate and totalized energy consumption in water and water/glycol based heating and cooling applications. System employs pulse generating Clark vortex flow transmitter, RTD sensors, Modbus 485 communications, and non-volatile memory. Generated scaled pulse output can be configured to report flow rate or energy total.

Eagle Eye Power Solutions, LLC    Milwaukee, WI 53211
Apr 05, 2011 Supplied with battery management software for 24/7 coverage in real-time, 48 V/24 Cell BDS/Pro monitors and analyzes status of batteries by measuring system voltage and current and battery internal ohmic value, connection resistance, and emperature. Ripple-removing algorithm allows precise measurement of battery health while system is on-line. Meeting IEEE recommendations, BDS/Pro is essential in ensuring battery health.

Control Co.    Houston, TX 77258 8307
Apr 05, 2011 Traceable® Ultra-Low Flow Meter is accurate to ±2% FS with liquid temperatures of 20-30°C and to ±4% FS otherwise. Suited for use with fluid temperatures from 0-50°C, it is operated via flow/total, units, zero, and power buttons and shows current flow and total accumulated flow on LCD. Device measures 6 5/8 x 4¾ x 4½ in. and has chemically resistant nylon 1/16 barbed inlet/outlet connectors, compatible with all types of tubing. Wall power adaptor and battery connector are supplied with unit.

Sensortechnics Inc.    Dublin, CA 94568
Apr 01, 2011 Designed for measuring ultra-low gauge or differential pressures from 2.5 mbar (1 in. H2O) FS, HCLA series perform digital signal conditioning and can directly communicate with MCUs without additional ADCs. Simultaneous offering of digital I²C bus interface and analog 0.5-4.5 V output signal promotes design flexibility for OEMs; digital SPI bus and custom specific outputs are available on request. Series also features integrated compensation and standard 5 V power supply (3 V optional).

Eaton Hydraulics    Eden Prairie, MN 55344
Mar 30, 2011 Designed to continuously monitor health of hydraulic hose assemblies, LifeSense(TM) hose detects when hose is nearing end of its useful life rather than estimating or predicting when hose will fail. Alert is then sent to user so assembly can be replaced to prevent downtime. Single monitoring unit can handle input from multiple hose assemblies. Unlike maintenance programs that replace assemblies at regular intervals, LifeSense allows virtually all of useful life to be utilized.

Omega Engineering, Inc.    Stamford, CT 06907
Mar 30, 2011 Intended for PC-based, non-contact temperature monitoring, IR-USB series features IR sensor/signal conditioner installation with direct USB connection. Included software converts PC into temperature meter, chart recorder, or data logger. Taking measurements from 0 to +1,000°F, sensor offers adjustable emissivity from 0.10-1.0. Typical applications include jobs where object to be measured is moving, is surrounded by EM field, or is contained in vacuum or other controlled atmosphere.

Norbar Torque Tools, Inc.    Willoughby, OH 44094
Mar 30, 2011 TruCheck(TM) Screwdriver Testers feature LED display, machined aluminum housings, and ¼ in. male hexagon tool interface. Available models include 0.1-3 Nm range unit with vertical tool input, 1-10 Nm tester with vertical tool input, and 1-25 Nm model with horizontal input and ¼ and 3/8 in. adapters for testing small torque wrenches. Screwdriver testers are workbench-mounted via two M6 bolts. TruCheck(TM) Plus option includes track, peak, and first peak modes of operation and RS232 data output.

Micro-Epsilon UK Ltd    Cheshire   United Kingdom
Mar 25, 2011 Self-contained optoNCDT 2300 laser displacement sensor integrates controller with Ethernet interface. Sensor can automatically compensate, in real-time, for changing surfaces, and records first and second reflection from target surface. Available in 5 models with measuring ranges from 2-100 mm, product has resolution down to 0.1 µm and linearity down to ±0.4 µm. Data output is via Ethernet, RS422, or EtherCAT and sensor can be configured using Web browser interface.