Sensors Monitors & Transducers
Housed in a secure, safe, waterproof and dustproof box, PurgEye® Site Oxygen Monitor is designed with PurgeNet™ for smart weld purging, automatic welding machine interface. Operated on 90 – 250 V, single phase A.C or with internal battery which lasts up to 10 hours, unit can measure oxygen levels from 1,000 ppm, right down to 1 ppm. Product delivers non-oxidised and zero colour welds.Read More
Ideal in Chemical, Refining, Power Generation and More
San Marcos, CA - March 30, 2017 - Designed for operation in rugged industrial processes, the compact FS10i Flow Switch/Monitor from Fluid Components International (FCI) now has obtained hazardous area approvals from multiple agencies for a wide range of liquid or gas monitoring applications that require accurate, reliable flow... Read More
Ashcroft® B, T and D series pressure and temperature switches are now certified as SIL 3 capable. Specific design and construction criteria ensure that they operate to exacting safety and reliability standards. These SIL 3 capable switches are recognized as suitable components for safety instrumented systems.
For more information, please call 203/385-0635 or visit
Supporting I²C bus communication interface, VCNL4035X01 Proximity and Light Sensors come with photo detector, signal conditioning IC, 16-bit ADC and driver for three external IREDs. Housed in 4 x 2.36 x 0.75 mm lead-free 8-pin QFN package, unit’s built-in photo diode offers detection from 0.004 lx to 4.2 klx. Used in notebooks, tablets, printers, copiers and automobiles, product is operated... Read More
The Dytran/Sage bus-based smart sensor platform for machinery diagnostics achieves Time Synchronous Averaging milestone. The Controller Area Network – Machinery Diagnostic (CAN-MD™) platform has achieved synchronous measurement capability that provides phase and amplitude as part of its computational toolbox.
February 20, 2017 - CHATSWORTH, California – Dytran Instruments, Inc.... Read More
Dytran Instruments, Inc. and Sage Machinery Diagnostics, LLC Introduce CAN-MD™ Digital Bus-Based VHM SolutionMarch 31, 2017
March 12, 2015 – Chatsworth, California, USA – Dytran Instruments, Inc. (www.dytran.com), is a leading manufacturer of piezoelectric and DC MEMS accelerometers. Sage Machinery Diagnostics, LLC, (www.sage-md.com) was founded in 2014 to provide professional consultation to Aviation, Naval and Industrial Machinery... Read More
Housed in small 1U half rack size chassis, IP-HE950 Encoder/Decoder supports SD, HD and 4K video resolutions. Featuring robust network error correction, dual encoding capabilities and variable I/O interface, unit uses H.265/HEVC technology. Product offer low latency ooperation and reliable IP transfer.Read More
Available with axial connector or cable versions, LA-25-R LVDT Linear Position Sensors feature flanges, single hole mounting kits, swivel rod eye ends and ball joints. Suitable for roller gap positioning, process valve displacement and head box and actuator position feedback, units are designed in 75 mm to 375 mm full scale. Sensors are housed in 3/8 in. diameter core extension rod with... Read More
Used for monitoring status of tank hatches, Hatch Watchdog Sensor tracks angle of the tank hatch and reports status to central gateway for remote monitoring. Having ½ mile operating range and battery life greater than 5 years, sensors can be attached to hatch using epoxy adhesive. Unit is activated by pressing zero button for two seconds. Modbus or digital alarming is available at central... Read More
Wire Strain Gages and Ceramic Cements are designed for high temperature environments. Available in ZWH-, ZWN-, and ZWP-Series models, Wire Strain Gages feature free-filament wire construction with welded 0.076 mm diameter lead wires. Packaged with fiberglass reinforced segmented tape carrier, units offer 120-ohm resistance. Ceramic cements are available in WC-16, NCC-3, and HG-1 models. W-16... Read More
Portable and fixed gas detectors, respiratory mask selected from more than 5,500 entries from 59 countries by independent experts
SMITHFIELD, R.I., March 22, 2017 - Honeywell (NYSE:HON) today announced that four of its safety products have won 2017 iF Design Awards in recognition of their outstanding innovation and user-focused design.
An independent jury of 58 design experts... Read More
Used in pet monitors, smart tags, beacons and key fobs, KXTJ3 Accelerometer can operate with low 1.5uA at its lowest ODR of 0.781Hz. Offering g-ranges of 2g, 4g, 8g, or 16g and resolution modes up to 14g, unit comes in 2mm x 2mm x 0.9mm form factor. Featuring embedded motion wake-up engine with 3.9mg threshold, unit supports I2C protocol up to 3.4MHz.Read More
Designed with centering collar on the inside diameter of the drum, ECA 4410 Angle Ring Encoder Series feature additional back-off threads for disassembly. Mechanically compatible with normal ECA 4000 line and ERA 4000 line of angle encoder feedback devices, unit can be used as single-encoder system in applications with control category SIL 2 and Category 3 PL performance level “d”.Read More
Available in single and multi-turn versions, NR60 Series Rotary Shaft Encoders come with built-in EtherNet/IP and Modbus interface. Offering 16 bits (single turn resolution) and 14 bits (number of revolutions) measuring range, units are housed in 60mm diameter package in flange or servo mounting styles. Meeting IP67 ingress protection rating, encoders are used in single-turn and multi-turn... Read More
Panel Discussion: ATSC 3.0 Advanced Emergency Alerting
Tuesday, April 25, 11 a.m., Meeting Room N256
Besides demonstrating a range of new and existing products at the 2017 NAB Show, Digital Alert Systems will have a voice in the discussion of ATSC 3.0 Advanced Emergency Alerting. Ed Czarnecki, the company's senior director of strategic development and global government... Read More
Microscan Presents New Capabilities of MicroHAWK Barcode Readers and Machine Vision Solutions at Advanced Design and Manufacturing ExpoMarch 17, 2017
Microscan will demonstrate new capabilities of the MicroHAWK family of products - the world's smallest high-performance barcode readers and smart cameras - at the ADM Cleveland Expo March 29th and 30th in Cleveland, Ohio.
RENTON, WA, March 15, 2017 – Microscan, a global technology leader in barcoding, machine vision, verification, and lighting solutions, will partner with Lakewood... Read More
Suitable for high cavitation molds with small, tightly packed ejector pins, Cavity Pressure Sensor is combined with eDART System for assisting molders in diagnosing processes. Designed with sensor head for matching with Piezoelectric 9211 6 mm button, units are available in 50 lb rating with ejector pins up to 2 mm diameter and 250 lb rating for pins up to 4.5 mm diameter. Sensors come in... Read More
Designed with flexible one-foot, twisted pair integral cable, Model 352A74 Teardrop ICP® Accelerometer offers low-noise and low impedance output signal with long distance signal transmission. Operating in -65 to +250 °F temperature and can withstand ±5,000 g accidental shock input, unit’s cable is terminated in 10-32 connector.Read More
Available in HBP-111, HBP-112 and HBP-110 series models, HB Series PIR Occupancy Sensors provide automatic control of individual LED and fluorescent lighting fixtures in warehouses, distribution centers, parking garage indoor and low bay spaces. HBP-110 series sensors feature enclosure that withstands 5 ft-lb impact without cracking. HBP-112 series sensors offer simple, cost-effective code... Read More
Suitable for multi-spectral EO/IR, high resolution surveillance and mission recording applications, H.264 HD-SDI Video Encoder delivers SDI signal monitoring output. Featuring optional on-board redundant storage for improving host system’s memory and data integrity, unit is used in UAVs, armoured vehicles and naval vessels. Operated with 1080p60 HD-SDI input, encoder can extract KLV... Read More