Omega Engineering, Inc.    Stamford, CT 06907
May 11, 2011 Featuring hot wire air velocity sensor design and choice of fixed mount or remote probe configurations, Model FMA900A measures air velocity up to 12,000 fpm with 2% full scale accuracy. Unit provides response time of 250 msec, 0-5 Vdc or 4-20 mA analog output, and 1 SPST relay contact closure with red LED indication. Equipped with adjustable high alarm set point, transmitter is suited for development labs, HVAC, and exhaust/ventilation hoods.

Emerson Process Management    Austin, TX 78754
May 10, 2011 Daniel(TM) 3812 Liquid Ultrasonic Flow Meter features accuracy of ±0.3% and repeatability of ±0.1%. It utilizes 2 mid-radius, parallel-plane measurement paths to reduce influence of flow disturbances, and includes 4 non-wetted, intrinsically safe transducers to maintain high accuracy over varying flow conditions. Predictive diagnostics package provides view of meter health and status, and Ethernet compatibility lets multiple users remotely monitor and verify process information.

Rohde & Schwarz Canada, Inc.    Ottawa, ON K2V1C7
May 09, 2011 R/S DVMS lets network operators monitor DVB-T2 transmitter and signal feed via T2 modulator interface without any additional equipment. Also, solution supports monitoring of single-frequency networks (SFN) and RF spectrum (shoulder). Support for electrical as well as optical feeding for IP interface allows use independent of feed circuits available in network, and DVB-T options for shoulder and SFN measurements are available for DVB-T2 as well.

Olympus    Waltham, MA 02453
May 06, 2011 With optimized data storage capacity and transfer rate, OmniScan MX2 provides inspection capabilities for manual and automated phased array applications. Integral 10.4 in. LCD touchscreen facilitates navigation, text input, and parameter setup, while SD card and USB interfaces provide connectivity. Fully compatible with phased array modules already in field, modular instrument comes with all software options, including multigroup, time-of-flight diffraction, and weld overlay wizard.

Agilent Technologies, Inc.    Santa Clara, CA 95051
May 06, 2011 Compatible with various waveform generators, BenchLink Waveform Builder Pro enables R/D engineers to create custom waveforms using equation editor and waveform math and drawing tools. Features include standard function library, waveform sequencer, and signal filtering and windowing functions for signal modification/refinement. Signal's frequency characteristics can be viewed using FFT capability, and complementary cumulative distribution function curves show signal's power characteristics.

Emerson Process Management    Pleasanton, CA 94566
May 06, 2011 Designed to measure pressure and temperature behind casing in subsea production wells online and in real-time, Roxar Downhole Wireless PT Sensor System - Annulus B consists of Integrated Downhole Network system, Downhole Network Controller Card, wireless reader, wireless PT Transponder and antennae, and transponder and reader carrier. System is qualified to last minimum of 20 years at temperatures up to 302°F and pressures up to 10,000 psi, with accuracy of ±2.5 psi and ±0.18°F.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
May 05, 2011 Ready to measure with no calibration adjustment required for most applications, POSITECTOR 6000 III Series includes versions for ferrous metals, non-ferrous metals, or for all metal substrates. Standard models feature monochrome display and can store 250 readings, while advanced models, with reversible color LCD, store 100,000 readings and enable data transfer via USB to PC or via Bluetooth to PC or printer. Scan mode lets users take continuous readings without lifting probe.

Raytek Corporation    Santa Cruz, CA 95061 1820
May 05, 2011 Model CS210 process imaging system enables cement manufacturers to continuously monitor rotary kilns to detect hot spots due to refractory loss, damage, and wear. Providing temperature monitoring along entire length of kiln shell, IR system also detects abnormal conditions such as faulty flame position and shape. Unit includes MP150 HR linescanner, with 1024 data points/scan line, as well as Ethernet TCP/IP communications and Windows® 7 compatible DataTemp® CS Software.

Konica Minolta Sensing Americas, Inc.    Ramsey, NJ 07446
May 04, 2011 Handheld spectrodensitometers are available in FD-5 series models that measure density and color, as well as FD-7 series units that can also monitor paper, inks, and plant lighting conditions. Models in FD-7 series offer scanning mode for creation of ICC profiles, and can measure over 400 times/sec. Able to account for fluorescence of paper substrate, both products also allow users to provide measurements that comply with Flexographic Image Reproduction Specifications and Tolerances.

Masimo, Inc.    Irvine, CA 92614
May 04, 2011 Available in handheld and bedside devices, rainbow® Reusable Direct Connect SpCO Sensors are suited for patients with low oxygen saturation of 90-95% and elevated methemoglobin between 0-2%. Units continuously measure total hemoglobin, oxygen content, carboxyhemoglobin, methemoglobin, Pleth Variability Index, and acoustic respiration rate. By allowing immediate and non-invasive assessment of toxic CO levels, sensors enable early detection of CO poisoning to facilitate life-saving treatment.

Marshall Electronics    El Segundo, CA 90245
May 03, 2011 Suited for those requiring retro sound during digital recording, UR-1 microphone combines classic, mellow sound of ribbon microphone and integrates it with USB technology. Electrical circuitry matches input requirements of ADCs and USB output with low-noise and high dynamic range. Focused in all-metal body with double-shielded grill, microphone can be used for recording singing, voiceovers, and podcasts. Volume control and headphone jack allow real-time monitoring without any latency.

CUI, Inc.    Beaverton, OR 97005
May 02, 2011 Housed in 9 mm package, 2-bit quadrature ACZ09 Series features rotational life of 30,000 cycles, operating temperature range of -10 to +65°C, and insulation resistance of 300 Vdc, 100 MW. Incremental encoders can be configured in over 1,000 different versions and are suitable for audio, aircraft, medical, and test equipment applications.

WattStopper    Santa Clara, CA 95050
May 02, 2011 Designed to detect only visible portion of lighting spectrum, single-zone closed loop Model LMLS-400 and multi-zone open loop Model LMLS-500 include 2-way IR transceiver for communication with wireless configuration tool. Model LMLS-400 additionally features automatic commissioning for either switching or dimming. Either sensor can be configured for on/off switching, bi-level or tri-level step switching or step dimming, or continuous dimming for each controlled zone.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Apr 29, 2011 Type 9809A hand force measuring system is designed for short- and long-term assessments of biomechanical forces, loads, or applied stresses to objects or machines. System features 2 hand force measuring handles with charge amplifiers, as well as USB interface, datalogger with CompactFlash card, DAQ system, software, and cables. Included multi-component piezoelectric force transducer offers dynamic measurements in 3 orthogonal directions. Unit requires laptop PC with USB port for operation.

Renishaw, Inc.    Hoffman Estates, IL 60192
Apr 29, 2011 RESOLUTE(TM) is available with FANUC serial communications in linear encoder formats, offering sub-micron accuracy and resolutions to 1 nm. Suited for precision machine tool builders requiring max performance from linear axes, product promotes smooth velocity ripple and servo stiffness while reducing hysteresis errors. It determines absolute position immediately upon switch-on, and images are captured, analyzed, and interpolated to resolutions as fine as 1 nm at speeds to 100 m/sec.

Eaton Corporation    Raleigh, NC 27615
Apr 28, 2011 Engineered for OEMs, PM3 module monitors power of branch and main circuit applications. It specifically measures current and voltage, calculates power and energy usage, and provides breaker status. Designed for Series G L-Frame and Series C K-Frame molded-case circuit breakers, this UL-Listed, add-on communications device can also be installed in reverse-feed applications with reverse-fed breakers. Measurement accuracy is within 2% of reading.

Sierra Monitor Corp.    Milpitas, CA 95035 6825
Apr 28, 2011 Offered with cast aluminum or 316 stainless steel enclosure for hazardous areas, Model 5100-25-IT is network-enabled with choice of outputs, including 4-20 mA, serial RS-485 Modbus RTU interface, or optional 8 A integral relays. Unit features 8-character, fixed and scrolling LED display and extended calibration frequencies that only require calibration every 6 months. To meet unique application requirements, remote sensor configuration option is available.

Sensorex    Garden Grove, CA 92841
Apr 28, 2011 When combined with TCSMA or TCSTX toroidal transmitter, TCS3020 toroidal sensor offers complete conductivity measurement system. Sensor is designed for 0-1,000 mS performance and provides non-contacting, inductive type conductivity measurement. Resistant to corrosion, coating, and fouling, product is suited for long-term deployment without any maintenance. Construction is of Noryl, operation is rated up to 150 psig, and solvent tolerance and temperature stability are rated to 105°C.

CAS DataLoggers, Inc    Chesterland, OH 44026
Apr 27, 2011 Suitable for thermal sterilization work up to 175°F, including bedbug extermination, Thermal Remediation Verification Kit proves temperature was reached and maintained above critical point to guarantee eradication. Kit includes 6 wireless temperature data loggers and 10 ft probe to monitor temperature in narrow spaces such as between mattresses and inside walls. Three loggers have internal temperature sensors ranging from -40 to 80°C, and 3 feature external sensors measuring -60 to 155°C.

AutomationDirect.com    Cumming, GA 30040-9905
Apr 27, 2011 Photoelectric sensors in GX series are available in rectangular plastic DC models, which are IP67-rated and have 18 mm dia threaded lens and M12 quick-disconnect. GX3 series diffuse photoelectric sensors feature fixed sensing distances of 100 or 150 mm, while GXP series polarized reflective photoelectric sensors have sensing distances of up to 20 m. Through-beam photoelectric models of GXR/E series feature sensing distances of up to 4 m.