Amacoil Inc.    Aston, PA 19014
Mar 21, 2005 Optical Flange Sensing System enhances winding accuracy when used with Uhing traverse winding drives. Two versions are available: one relies on reflective properties of spool flanges, and one uses light curtain concept that does not require reflected light. Both systems employ opto-sensors to detect spool flanges and signal pneumatic or electronic switch to flip spring-actuated reversal lever on winding drive.

Gamewell Co., The    Ashland, MA 01721
Mar 21, 2005 SmartScan is offered on company's IdentiFlex 600 Series fire control panels. It provides alarm verification per detector and is fully digital. Panel end-to-end response is reduced to less than 5 sec, and 198 devices per loop can be supported. Protocol enables loop distances up to 12,000 ft of twisted pair, parallel pair, THHN, and shielded wire types. One loop poll covers 10 devices.

Banner Engineering Corp.    Minneapolis, MN 55441
Mar 21, 2005 Compact, self-contained, PresencePLUS® P4 GEO 1.3 vision sensor is offered with in-line and right-angle lens positions. Remote TEACH allows sensor to learn features to inspect for, and live video image output allows real-time viewing of inspection images without PC. Three bi-color LED indicators show unit status during setup and operation, and network interface is through built-in 10/100 Ethernet connection, RS-232, or 4 discrete input/outputs.

Electro-Sensors, Inc.    Minnetonka, MN 55343 9108
Mar 18, 2005 Designed to minimize risk of equipment damage, VS-XP Series detects under- and over-vibration conditions. Cast aluminum housing is suited for hazardous locations, and adjustable vibration alarm trip-point can be used for machine shutdown or operator warning. Able to detect vibration velocities from 0.10–26 ips rms, product features adjustable set-point delay to prevent false trips; selectable over- or under-vibration alarm; and SPDT relay or NPN output.

American Sensor Technologies, Inc.    Mt. Olive, NJ 07828
Mar 18, 2005 Exhibiting resistance against hydrogen permeation and embrittlement, Model 4600 ExplosionProof Pressure Sensors install directly on outlet valve to perform condition monitoring. Construction includes 316L stainless steel wetted parts and one-piece 316L diaphragm free of internal O-rings, welds, or fill fluids. Product, offered with outputs of 0.5-4.5 V ratiometric, 1-5 V, 1-6 V, .25-5 V, or 4-20 mA, features accuracy of less than ±0.25% BFSL at 77ºF.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Mar 17, 2005 Lineas® Weigh In Motion Sensor Type 9195E measures wheel- and axle loads and also determines vehicle gross weight under rolling traffic conditions. Compact cables require 8 mm wide installation slots and channels for integration into road surface. Quartz piezoelectric sensor provides stability, is insensitive to temperature changes, and is protected to IP 68. Available in 2 sensing lengths, products accommodate all lane widths and choice of cable lengths.

ADMET    Norwood, MA 02062
Mar 17, 2005 Tabletop universal testing machine series eXpert 450x are offered in actuator/controller (no load frame)-only configuration and 2-column model. All models feature top-mounted, detachable actuator with optional seal kit for use in harsh environments. Configured for tension, compression, and bend tests from under 1 lb to 1,000 lb, machines are offered with 225 lb, 25 ipm; 700 lb, 7 ipm; and 1,000 lb, 2.2 ipm motor/gear packages.

Joslyn Hi-Voltage Corp.    Cleveland, OH 44105 4398
Mar 16, 2005 Three-phase TriModâ„¢ 300R Series requires only one control cable for full functionality and provides twice the duty cycle required by ANSI C.37.60. Solid-dielectric insulation system minimizes environmental problems associated with typical oil and gas insulation. Removable current transformers are surrounded by grounded metal surface, providing added personnel and equipment safety. Operating mechanism delivers 10,000 maintenance-free operations.

Markland Technologies, Inc.    Ridgefield, CT 06877
Mar 16, 2005 Lightweight, Image-Enhanced, Zoom-able Reconnaissance Device (LIZRD) flies in conjunction with hyper-spectral sensors, which offer high-resolution view of aerial scene. It utilizes fiber optic gyro and GPS for attitude and position information, as well as line scanning camera for imagery data collection. Unit performs motion correction to compensate for aircraft attitude variation, stamping information onto digital imagery data. Mission and imagery analysis software are included.

Honeywell Sensing and Control    Golden Valley, MN 55422
Mar 15, 2005 Featuring Wheatstone bridge construction, silicon piezoresistive technology, and ratiometric output, Series HPX is suited for applications using non-corrosive, non-ionic working fluids. Gage devices come in 6-pin Dual-Inline package, while absolute devices come in 8-pin, surface-mount SOIC package. Both are non-amplified and non-calibrated. Units offer pressure ranges from 0-100 psi, operating temperature of -40 to 257°F, and response time of 1 ms.

Fluid Components Intl.    San Marcos, CA 92069 5115
Mar 15, 2005 Series ST75 measures and monitors air or gas flows in line sizes from 0.25–2.0 in. and provides outputs of mass flow rate, totalized flow, and media temperature. It combines non-clogging, thermal dispersion sensing element with microprocessor-based electronics. Unit services flow range from 0.008–839 scfm and provides ±2% of reading accuracy with ±0.5% repeatability. It is enclosed in all-metal, dust- and water-resistant, NEMA 4X rated package.

TURCK, Inc.    Plymouth, MN 55441
Mar 15, 2005 Allowing for direct connection to DeviceNet field bus networks, Model Ni 4-DSU35-2DNETX5-H1150 incorporates dual outputs, and is used in tandem with actuation kit to monitor position of rotary actuators. It provides open and closed positions on most 90° actuators for direct valve control, and gives user both visual and electrical position indication. Inductive sensor can be used on valve stem heights of 20, 30, or 50 mm with outer mounting hole dimensions of 80 or 130 mm.

Schmitt Industries, Inc.    Portland, OR 97210 1818
Mar 15, 2005 Comprising computer control, sensor, spindle mounting adapter, and balancing head, SBS System attaches to grinding machines with wheels from 150–1,220 mm dia. It achieves results to within 0.02 microns at speeds from 300–30,000 rev/min. Acoustic Emission Monitoring System consists of acoustic sensor and slot-in PCB card for SM-4500 control unit. It eliminates gap time in CNC machining cycles, monitors condition of cutting tools, and reports contact between components within 1 ms.

CUI, Inc.    Tualatin, OR 97062
Mar 14, 2005 Measuring 13 mm dia and 17.5 mm high, Model MAS10-256-G delivers 8 bits of absolute position information with gray code, parallel output. It is capable of operating within 0-60°C temperature range and can accurately measure rotary process as fast as 6,000 rpm. Unit requires 5 Vdc input supply voltage with 40 mA max current. Applications include medical devices, instrumentation, and robotics.

MTS Sensors Group    Cary, NC 27513
Mar 14, 2005 Suited for fuels and solvents, Model USTD II is designed for leak detection and inventory monitoring applications. Gauge senses inventory level, interface level, and temperature, and utilizing Temposonics® magnetostrictive technology, sensor provides continuous absolute level gauging. Dual floats measure product level and water, and 5 integrated temperature transmitters determine average and individual multi-point temperatures.

Speedline Technologies Inc.    Franklin, MA 02038
Mar 10, 2005 OmniCheck delivers redundant check on process temperatures and belt speed for reflow ovens while also providing data tracking and monitoring of process parameters. Operators can specify alarms and set points to direct system to take action, such as audible alarm, hard stop, soft stop, or ignore if redundant thermocouples or redundant conveyor speed exceeds process setting. System is offered as option on Electrovert OmniExcel® series ovens or as upgrade to existing equipment.

Hamamatsu    Bridgewater, NJ 08807 0910
Mar 09, 2005 Series S9736 FFT-CCDs utilize MPP mode of operation to achieve dark current of 10 e-/pixel/s at 0°C, readout noise of 4 e-rms, and dynamic range of 75,000. Covering spectral response range of 400–1,100 nm, series achieves Quantum Efficiency of 39% at 660 nm. It features 512 x 512 pixel format with pixel size of 24 x 24 mm, achieving 100% fill factor. Four-stage TE-cooled element is built into housing so sensors can be cooled down to -70°C using forced air cooling.

Sensor Developments, Inc.    Orion, MI 48359
Mar 09, 2005 Rated up to 20,000 rpm, rotating torque sensor features digital, infrared transmission system and 16 bits of resolution. In-line, non-contact unit, offered in various torque capacities and configurations, also features complete signal conditioning that is compatible with commercial dynamometer controllers.

PreCon National Sales Co.    Memphis, TN 38184
Mar 09, 2005 Using capacitive-polymer sensing technology, HS-2000DD combines temperature compensation and factory calibration with single-supply digital communication capabilities. It operates with supply voltage of 2.0–5.5 V and can draw supply current from microprocessor I/O pin. Output format is standard serial at 9,600 baud. Accurate to ±2% RH, product features stability from -30 to +100°C and chemical resistance.

PerkinElmer, Inc., Optoelectronics Headquarters    Fremont, CA 94538-3180
Mar 08, 2005 Featuring modular design, smart sensor Model PYM 151 detects and monitors natural gas in homes and industrial environments. Measurement technique utilizes infrared emitters in conjunction with pyroelectric detector technology. System allows OEM alarm manufacturers to integrate NDIR technology with snap-in design and add-on alarm processing and actuations.