HBM, Inc.    Marlborough, MA 01752 3014
Nov 15, 2005 P3MBP Blue Line range of pressure transducers features nominal pressure range up to 15,000 bar. Made with patented one-piece steel measuring body without weld seams or potential weak spots, Blue Line is optimally dimensioned and fitted with foil strain gage measuring grid.

Dillon, Inc., A Div. Of Avery Weigh-Tronix    Fairmont, MN 56031-1439
Nov 15, 2005 Quick-Check Tension Meter incorporates loadcell with LCD display that instantly calculates tension of guy wires, overhead wires, and elevator cables. With sheaves that accommodate rated wire sizes of 3/16-¾ in., lever-operated meter does not require manual calculation, lookup tables, or conversion charts and is available in 2 tension capacities up to 8,000 lb/35 kN/3,500 kg. Handheld unit offers on-board storage for up to 15 calibrations.

Photovac Inc.    Waltham, MA 02451 1166
Nov 15, 2005 Portable Photoionization Detector, 2020gasPRO(TM), utilizes pre-filter tubes that enable unit to function as single-gas detection instrument to detect presence of benzene. Suited for hydrocarbon processing industry, instrument incorporates tube holder that can carry activated charcoal tubes for increased clean air calibration accuracy, as well as humidity reduction tubes for operation in extremely humid environments.

Alemite LLC    Fort Mill, SC 29715
Nov 14, 2005 Suited for bulk tanks that hold non-flammable petroleum-based fluids, synthetic oils, and antifreeze, Bigview Tank Monitor enables users to view tank-level information in real-time from computer, including low fluid warnings. Operated using controller that connects to series of probes, password-protected system can simultaneously monitor up to 16 tanks per controller per station and display accurate tank level information for each tank.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Nov 14, 2005 Featuring 3-color light source, Dura-Vue(TM) DK12-11/124/136 Contrast Sensor provides reliable reference mark detection and will adapt to solve difficult contrast applications. Features include LED status indicators, diagnostics, remote or potentiometer teach-in capability, 4-in-1 output, and adjustable M12x1 quick disconnect. Used to detect difference in 2 colors or media, product comes in compact metal housing.

Omron Electronics, LLC    Schaumburg, IL 60173
Nov 14, 2005 Suited for food and pharmaceutical industries, anti-microbial E2F-D Series includes FDA-approved additive that is effective against broad range of micro-organisms such as bacteria, fungi, algae, and viruses. Inductive proximity sensors combat formation of bacteria, reducing risk of food contamination.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Nov 11, 2005 Designed for long-term performance, Series SSS-1000 senses differential pressure of variable air volume terminal units, fan terminal units, and individual zones in HVAC systems. It is available with 1-4 sensing points and in lengths from 3 5/32-9 29/32 in. to accommodate box size diameters from 4-20 in. All units include 3/8 in. polyethylene tubing.

Saelig Co., Inc.    Pittsford, NY 14534
Nov 11, 2005 Designed for charge-transfer capacitive touch-sensing switch applications, QT110 series creates touch-sense fields through dielectric surfaces such as plastic or glass up to 4 in. thick. QTouch sensor ICs can also turn small objects into sensors and work through gloved hands. Along with lifetime auto-calibration and drift compensation, series features current consumption down to 10 µA and automatic adjustment to build-up of dirt, moisture, and temperature.

Setra Systems, Inc.    Boxborough, MA 01719
Nov 11, 2005 Manufactured in 318SS enclosure rated IP68 to 200 mWG, Model 595 features integral specific gravity compensation that provides true level reading - even when subjected to media temperature changes over 23-113°F range. Hermetic header eliminates possibility of water entering transducer. Resistant to effects of humidity, product is offered with 2-wire/4-20 mA, SDI-12 w/4-20 mA, RS485, or SDI-12 output. It comes in gauge pressure ranges from 5-40 mWG.

Analog Devices, Inc.    Norwood, MA 02062-9106
Nov 11, 2005 Designed for handheld consumer electronics, ADXL330 features 3-axis sensor structure integrated with signal conditioned analog voltage outputs on same die. It is housed in 4 x 4 x 1.45 mm plastic SMT package and based on iMEMS® Motion Signal Processing(TM) technology. With ±2 g range, product is capable of measuring static acceleration of gravity for tilt-sensing applications as well as dynamic acceleration resulting from motion, shock, or vibration.

Grace Engineered Products, Inc.    Davenport, IA 52807
Nov 10, 2005 Mounted inside control panel via DIN rail, VoltageVision(TM) Power Warning Alert locates every power source inside panel to maintain electrically safe work conditions. It enables those performing maintenance on open control panels to see voltage state of every power source. Hardwired into any power source, unit flashes whenever hazardous voltage is present in any single/3-phase or dc power system. System detects ac and dc voltage and operates from 40-750 Vac/30-1,000 Vdc.

Banner Engineering Corp.    Minneapolis, MN 55441
Nov 10, 2005 WORLD-BEAM® 1 QS18LD Laser Diffuse and QS18LLP Laser Retroreflective Sensors offer sensing range of 300 mm and 10 m, respectively. Single-turn potentiometer on back of sensors allows user adjustment, while crosstalk rejection algorithm protects against optical disturbances from adjacent sensors. Green and amber status LEDs are visible from 360°. Designed with 18 mm threaded barrel housing, units feature 10-30 Vdc operation and solid-state PNP or NPN outputs.

Z Meters, Inc.    San Jose, CA 95124
Nov 09, 2005 Utilizing time-synchronized, multipoint measurement and correlation techniques, ZM100 characterizes impedance of distribution systems. It consists of 2 or more ZM100 Distribution Analyzers, connected to salient point in facility's electrical distribution system, used to identify and localize variety of conditions that can lead to voltage anomalies and/or power loss. Features include Bluetooth wireless communications and Windows-based software.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Nov 08, 2005 Along with 1/8 in. male NPT center back connection, Series SGC compact OEM pressure gage comes standard with 1 in., 304 SS case suitable for OEM applications using pumps, compressors, and portable cylinders. Products are available in ranges from 0-100 psig up to 0-5,000 psig.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Nov 08, 2005 Small volume of triple wound Bourdon tube inside Series 7112B Spirahelic® gage enables diaphragm seals smaller than standard C Bourdon tube gage. Diaphragm seals are available with 316L SS wetted parts and are offered on models with pressure ranges up to 1,000 psig. Optional ¼ in. NPT flush port is available for applications such as water treatment plants that require clean-out line to maintain proper gage performance.

Omron Electronics, LLC    Schaumburg, IL 60173
Nov 08, 2005 Built on modular, plug-and-play concept, scalable ZS-L series laser displacement measurement sensors employ 2D CMOS technology. They are available with 9 sensor heads for distances from 10-350 mm and measuring ranges from ±0.5 to ±135 mm. Combined with matching controllers, multi-calculation controllers, and data storage units, sensors are set-up via controller or point-to-point USB connection to PC and deliver resolutions as fine as 0.25 mM with sampling speeds to 110 mS.

Mine Safety Appliances Company / Instrument Division    Pittsburgh, PA 15230
Nov 08, 2005 Offered with plastic or metal housings, Z Gard(TM) S Sensor detects CO gas, NO₂, or refrigerants in air and is available with 4-20 mA analog output or addressable RS-485 digital signal. Z Gard C Controllers, available in metal or fiberglass enclosures, accept 4-20 mA or RS-485 inputs from Z Gard S Sensors and accommodate inputs from 1-8 remote sensors. Z Gard C 485 and CX interface with up to 24 MSA Z Gard S Sensors and 40 remote MSA Z Gard Sensors, respectively.

MTS Systems Corp. - Sensor Div.    Cary, NC 27513
Nov 08, 2005 Offered in 3A sanitary configurations, MTS Temposonics linear position sensors provide non-contact solutions with digitally based linear feedback and NEMA 4X- or IP68-rated housings. Magnetostrictive products, used for level and interface measurement, provide remote programming and diagnostic capabilities via serial communication over standard cabling. Output options include analog, digital pulse, SSI, and fieldbus outputs such as CANOpen, DeviceNet, and Profibus.

MTS Sensors Group    Cary, NC 27513
Nov 07, 2005 Assembled inside sealed, stainless steel IP67 housing, non-contact Temposonics® R-Series and G-Series Sensors are suited for sanitary and washdown environments. Serial communication and PC-based user interface enable remote programmability and diagnostics without compromising protection rating. Housing is specifically designed for cylinder feedback, valve positioning, and tank level gauging in food and beverage, pharmaceutical, packaging, and power generation industries.

Industrial Scientific Corp.    Oakdale, PA 15071 1500
Nov 07, 2005 Dockable GasBadge® Pro uses interchangeable smart sensors to monitor unsafe levels of oxygen or toxic gas. It includes STEL and TWA readings, datalogging of up to 1 year of survey data, and event-logger that records past 15 alarm events. Housed in rugged enclosure, GasBadge Pro is water-resistant and immune to RF. It displays gas readings in % by volume or ppm, and will alert user with audible alarm complemented by vibrating and visual alarms when gas concentrations exceed limits.