Extreme CCTV Surveillance Systems    Burnaby V5A 3C2  Canada
Jul 19, 2006 Utilizing mechanical filter technology, EXPB-001 Performance Bundle provides turnkey, 24/7 PTZ (pan-tilt-zoom) speed dome solution that delivers daytime color vision as well as up to 200 ft of active-infrared night vision under dual UF500 Infrared Illuminators. Camera features 23x optical zoom and uses Gold Optics IR technology. All mounting hardware is included and designed to fit directly on pole.

Universal Flow Monitors, Inc.    Hazel Park, MI 48030
Jul 19, 2006 DeltaPoint® tip-loss monitors with DeviceNet interface feature vortex shedding flowmeters that measure water flow in and out and compare flow rate and temp. Device can monitor 13 welding tips and will alert robot to stop welding if leak is detected. Monitors accommodate cooling flows to 12 gpm and water temp to 230°F. Featuring remote shutoff and restart, device is programmable for leak rate alarm, time or restart delay, temp fault level, flow okay, and minimum flow indication.

Megger    Dallas, TX 75237-1017
Jul 19, 2006 MPP1000 Pinpointer locates faults in shielded, primary, and direct buried electric cables. Unit measures and displays ballistic impulse, acoustic signal strength, time delay between acoustic and magnetic signal, relative distance, and direction to fault. Stand-alone unit detects electromagnetic impulse, single-probe version allows detection of acoustic thump and measures distance to fault, and dual-probe version can provide direction to fault. Enclosure is weather-resistant.

Sensaphone    Aston, PA 19014
Jul 19, 2006 Designed to protect industrial plants and chemical manufacturing facilities, Sensaphone® 1800 monitors critical fluid storage, flow meters, water levels, timers, temperature, power failure, and alarms. When problem is detected, system automatically issues alarm notifications to as many as 8 recipients via voice phone or text messages to alphanumeric pagers and cell phones. Features include alarm history reviews, data logging, Web-based interface, and remote control capabilities.

SpaceAge Control, Inc.    Palmdale, CA 93550
Jul 18, 2006 Offered with fixed or adjustable mounting features, Series M provides choice of analog (voltage divider or rheostat) or digital (quadrature) sensors. General-capability products utilize spring rated for 100,000 full-stroke cycles (min) and low-inertia drum. Reduced displacement cable fleet angle optimizes repeatability and minimizes cable overlap. Compatible with self-tapping or washer/nut screws, series offers free-release-tolerant displacement cable termination.

Norgren    Littleton, CO 80120
Jul 18, 2006 Utilized in pneumatic and hydraulic environments, Herion 33D Series is available in ranges from vacuum to 10,000 psi and is fully programmable for NO, NC, or window mode operation. Switching status is indicated by backlit real-time LED display and features selectable pressure units for global use. Designed with stainless steel wetted parts, switches include programmable delays, LED status indication, tamper protection, and IP65-rated M12 connector.

4B Components, Ltd.    East Peoria, IL 61611
Jul 18, 2006 Providing shaft speed monitoring solution and consisting of all-stainless steel construction, including sealed twin stainless steel bearings, Heavy Duty (HD) Whirligig can be used with 12, 18, or 30 mm inductive speed sensors. Product provides solution to installing speed monitor or proximity sensor to rotating shaft. Available with 1, 2, 4, or 8 targets per revolution, unit can be used on shafts rotating at speeds up to 3,000 rpm.

AMETEK, Advanced Measurement Technology, Inc.    Oak Ridge, TN 37831-0895
Jul 18, 2006 Incorporating high-purity Germanium crystal detector, handheld Detective-EX-100 detects and differentiates between potentially dangerous radioactive materials and otherwise harmless radiation sources. HPGe crystals detect minute amounts of neutrons and gamma rays emitted by radioactive materials, even if heavy metal shielding has been placed around source. Moderated neutron detector provides confirmation when fissile nuclear materials are present.

Macro Sensors    Pennsauken, NJ 08110 1334
Jul 17, 2006 Featuring through-bore design that makes sensor core accessible from both ends, single-ended SE 750 Series terminates through sealed axial connector that prohibits core from passing completely through coil assembly. Products operate over 0 to +160ºF range from 24 Vdc nominal, 15-24 Vdc +10%, or 30 mA nominal input. Offered in 9 ranges from 0.100-20.00 in., general-purpose ¾ in. DC-LVDTs provide max linearity error of less than or equal to ±0.25% of FSO.

SICK, Inc.    Minneapolis, MN 55438
Jul 17, 2006 Providing 4 m safety field and 49 m warning field radius, S3000 Short Range features 190° scanning range and 4 levels of integrated functionality for up to 8 user-definable protection scenarios. Size and shape of fields can be defined via software. Adding features such as reflector mark detection up to 30 m and event-driven contour measurement data output up to 49 m, S3000 Professional CMS (Contour Measurement & Safety) meets navigation requirements in mobile vehicle applications.

Instron    Norwood, MA 02062-2643
Jul 17, 2006 Along with integrated software that facilitates setup and consistent calibration, advanced video extensometer (AVE) uses digital camera and real-time image processing to make strain measurements on material test samples. Non-contact measurement design ensures extensometer has no influence on specimen, eliminating possibility of damage. Solid-state unit is available with 3 fields of view and transverse strain measurement capabilities.

McCrometer, Inc.    Hemet, CA 92545
Jul 17, 2006 Able to be used in vertical pipes and locations near bends and elbows, Marsh Multi-Mag(TM) Flow Meter suits applications with low volume or wide range as well as those containing sand and grit. It measures liquid volumetric flow rates with streamlined multi-point technology that creates only negligible pressure loss. Performing constant profiling, unit automatically senses and corrects for shifting profiles, measuring flow with accuracy up to ±1% of reading.

STMicroelectronics    Lexington, MA 02421
Jul 13, 2006 Housed in TSSOP14 package, Model PCLT-2AT4 provides EMI protection for 24 Vdc input modules and is designed to achieve Type 1, 2, and 3 characteristics of IEC61131-2 standard. Each of 2 channels terminates connection between high-side proximity sensor and input of I/O module. Current limit is programmable with single external resistor to 7.2-2.5 mA. Outputs can be configured as opto-coupler drivers, or as CMOS outputs to drive bus controller directly, under single input control.

UV Process Supply, Inc.    Chicago, IL 60614-4805
Jul 13, 2006 Adhesive-backed UV FastCheck(TM) Strips feature 5 separate color changing zones, each of which changes color after specific amount of UV light is received. Measuring 2 1/8 x ½ in., products measure UV doses from 0-5,000 mJ/cm² and exhibit thermal stability, making them suitable for use in applications where radiometer is not possible. UV Intensity Labels (N010-005) use same color changing principle as FastCheck Strips, but have only 1 color changing square.

BEI Sensors (BEI Industrial Encoders)    Goleta, CA 93117
Jul 12, 2006 Designed with stainless steel scale, sealed read head, and IP67 rating, LN Series offers resistance to shock, vibration, and contaminants. Encoders provide repeatable position feedback and can function in harsh industrial environments with no air purging system required. Operating from 5-28 Vdc, units offer measuring resolutions of 0.5-10 µm and scale measuring lengths from 2-36 ft. They are equipped with line driver or open collector outputs and universal mounting adapters.

Scientific Technologies, Inc.    Phoenix, AZ 85012
Jul 11, 2006 Provided in glass-filled, NEMA 6, thermoplastic housing, T4012 Series universal tongue-operated safety interlock switch comes in 2- or 4-contact pole versions and may be used in water washdown environments. Quad-contact pole version provides 2 poles each for dual channel safety monitoring and status monitoring. Switches provide two million actuations min when used with optional stainless steel actuator, and rotatable head offers 8 possible actuator entry points.

SIE SENSORS Industry Electronics Inc.    Toledo, OH 43635
Jul 11, 2006 Operating at 10-35 Vdc, microLEVEL SK1-FSA-mLM12-XDC-PSU Series is designed with Smart-Level technology, which self-adjusts sensitivity automatically upon installation. Three-wire, PNP/NPN and NO/NC units can be implemented with one sensor. Available in M12 or ¼ in. NPT housing made of Polysulfon, self-contained sensors withstand stringent environments. They operate up to 105°C/220°F and are offered with 2 m cable or M8 quick-disconnect wiring configurations.

Cognex Corp.    Natick, MA 01760 2059
Jul 10, 2006 Models DVT® 515 and 535 operate with Intellect(TM) software, which facilitates setup, integration, and maintenance. Users can combine vision tools to inspect, measure, count, find features, and compare patterns in order to automate inspection and ensure quality in various applications. Both units have built-in Ethernet for connecting to factory networks and software, facilitating communications setup with other vision systems, PLCs, SCADA systems, PCs, and databases.

MTS Sensors Group    Cary, NC 27513
Jul 07, 2006 R-Series EtherCAT can be used with 1-5 magnets to document position, velocity, acceleration, as well as customer-specific smart functionality. Position resolution is accurate to 1 µm, speed to 0.2 mm/s, and sensor update time is 100 µs. RH Model is capable of hydraulic or pneumatic in-cylinder operation at 5,000 psi continuous and rated IP 67 for stroke lengths up to 300 in., while RP Model style for mounting to machine surfaces is rated IP 65 at stroke lengths up to 200 in.

Emerson Process Management    Austin, TX 78754
Jul 07, 2006 Autocalibration Sequencer models SPS 4001B, IMPS 4000, and MPS 3000 help ensure O2 measurements are accurate for in-situ oxygen analyzers, without manually initiating calibrations. While SPS 4001B is designed for single-probe applications, IMPS 4000 and MPS 3000 suit applications with up to 4 O2 probes. Able to be added to existing oxygen installations, products are equipped with HART® digital communication and utilize Calibration Recommended diagnostics.