LG Electronics USA, Inc.    Englewood Cliffs, NJ 07632
Jun 22, 2011 Using zero client virtual computing technology, 19 in. P Series Model N1910LZ connects server host and simultaneously redistributes its capabilities to multiple users through Internet Protocol. LED monitor utilizes Teradici® PCoIP® Chipset and VMWare software to deliver secure virtual solution that broadens integrated computing beyond designated labs to offices and classrooms. With enough bandwidth, one server computer can potentially support more than 100 redistributed systems.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 22, 2011 With frequency range of 4.7-4,000 Hz ±5%, EX600B13 and EX600B14 are suited for measuring vibration in gas turbines. Components include side-exit charge mode sensor; 10 ft, hermetically sealed, hard-line cable; and ICP® charge amplifier. Able to withstand environments up to +900°F, CSA-approved products employ sensing element insensitive to base strains, thermal transients, and pyroelectric effects. Design eliminates contamination and common mode noise concerns.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 22, 2011 Featuring 2-pin MIL-C-501 side-exit connector, ICP® Model HT602D01 measures vibration on paper machines and other high temperature applications. Ceramic shear, hermetically sealed accelerometer provides 100 mV/g sensitivity with frequency range of 30-480,000 cpm (0.5-8,000 Hz). Housed in stainless steel, device is suited for predictive maintenance of gearboxes, motors, bearings, and machine tools.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 21, 2011 Provided in preloaded flange mount configuration that allows 8 screw installation, 261A Series can simultaneously measure dynamic and quasi-static forces in 3 orthogonal directions. Units feature full scale measuring ranges from 500-4,000 lb in X and Y directions, and from 1,000-10,000 lb in Z direction in 3 mechanical envelopes. All ranges are available in choice ICP® or change output versions as well as English or metric mounting threads.

Fluke Networks    Camarillo, CA 93010
Jun 21, 2011 Measuring 2 in. thin and weighing less than 5 lb, OptiView® XG automatically discovers path between 2 points in network and monitors performance to identify network issues, decreasing time required to isolate network versus application problems. Mobile device has 3 on-board spectrum analysis radios that allow simultaneous network discovery, wireless performance analysis, and interference detection. Features include 10.25 in. 1024 x 768 screen, 10/100/1000M RJ-45 ports, and 100/1000M SFP+ port.

DeFelsko Corp.    Ogdensburg, NY 13669
Jun 21, 2011 Standard and Advanced PosiTector® 6000 models feature built-in memory, onscreen statistics, USB mass storage, and Fast mode. Additionally, Advanced models include reversible color LCD, scan mode, onscreen help, real-time graphing, and picture prompting. Instruments can upload stored measurements, generate customizable reports, and share results via secure internet connection. Alternatively, stored readings and graphs can be accessed using universal PC/Mac Web browsers or file explorers.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 21, 2011 Able to withstand environments up to +900°F, Series 600B13/B14 includes side-exit charge mode sensor, 10 ft hermetically sealed hard-line cable, and integral ICP® charge amplifier for power generation monitoring applications. Shear mode sensing element provides optimal performance for dealing with transient temperature changes and spiking. With frequency range of 282-240,000 cpm (4.7-4,000 Hz), Models 600B13 and 600B14 feature sensitivity of 100 mV/g and 10 mV/g, respectively.

AEMC Instruments    Foxborough, MA 02035
Jun 21, 2011 Water-resistant and IP65-rated, 4-channel Simple Logger® II Model AL834 features 4 integral current sensors, each measuring 24 in. long and capable of wrapping around 8 in. conductor. Selection of data storage modes, as well as data sampling rates is user programmable through DataView® software. Up to 1,000,000 measurements can be stored in internal nonvolatile memory. Powered by 4 C cell alkaline batteries, logger communicates to DataView software via Bluetooth technology.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 20, 2011 Operating over 20 Hz to 20 kHz range, models 130E20, 130E21, and 130E22 have similar specifications but are respectively differentiated by BNC, 10-32, and SMB connectors. All models have electret designs and operate on free-field response type, which compensates for their own presence in sound field. Sensitivity is 45 mV/Pa, with noise dloor rating of 30 dBA, and sound pressure level measurement is rated up to 122 dB. TEDS v1.0 lets user locate specific microphone within large group.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 20, 2011 Series 4115K uses non-contact, rotary transformers for sending excitation voltage to and receiving measurement signals from strain gauge instrumented rotating sensor element. Flange and splined shaft design conforms to AND 10262/20002, making these transducers suited for torque studies on aerospace hydraulic motors and pumps. Other applications include dynamometers, drive shafts, transmissions, fans, and electric motors. Optional pickup provides output proportional to speed.

NK Technologies    Campbell, CA 95008
Jun 20, 2011 Monitoring resistive or inductive loads to detect current usage on large machines using AC current, ATCR Series flexible loop current transducers consist of sensing coil and True RMS signal conditioner. Each model uses 2 wires to provide power supply and output signal, allowing installer to pass coil around conductors without disconnecting existing wires. Supplied in 35 mm DIN-rail mount enclosure, series offers single range functionality and output magnetically isolated from input.

Banner Engineering Corp.    Minneapolis, MN 55441
Jun 20, 2011 Cased in IP67-rated, zinc alloy die-cast housing with acrylic lens, R58B Series is capable of detecting 16 levels of gray scale. TEACH is performed via single click on push-button or via remote input. It allows sensor to learn light and dark sensing conditions, based on user inputs, and then automatically adjust sensitivity. Smart gain control algorithm maximizes performance in low-contrast or high-gloss applications, while status LEDs indicate configuration and emitter color.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jun 20, 2011 Used for measurement and control of strain gage transducer based systems, Model 4215 offers 2 independent lines of 20-character display for simultaneous viewing of both channels. Calibration-quality, unit combines force channels, encoder position channels, print capabilities, and RS-232/485 serial communications. In addition to bipolar range ±999,999 display with 24-bit resolution, features include TEDS-Tag Auto Load Cell ID, setup for 25 load cells, and front panel shunt calibration.

Crestron Electronics, Inc.    Rockleigh, NJ 07647
Jun 17, 2011 Available with 1 or 2 microphones, FreeSpeech(TM) system leverages RF/IR wireless technology to add amplified speech audio reinforcement as part of complete classroom media presentation system. Hands-free microphone can be clipped to lapel, hung around neck, or placed in tabletop stand, and built-in 30 W stereo amplifier provides everything needed to drive set of speakers. It also allows for connection of DVD player, computer, or other audio sources.

Sensitech, Inc.    Beverly, MA 01915
Jun 17, 2011 Designed to help customers mitigate risk by allowing precise monitoring of temperature-sensitive products during storage, handling, and distribution, TempTale®4 Temperature Monitors are available with up to 6 programmable alarm settings, 16,000 data point storage capacity, and NIST® Certificate of Validation. Standard TT4 version lets users set multiple time-and-temperature alarms, while TT4 USB version offers added benefit of USB interface and PDF-formatted time-and-temperature report.

Meggitt (Maryland), Inc.    Germantown, MD 20876
Jun 16, 2011 Operating at 100 mV/in./sec, Vibro-Meter® PV 102 is suited for condition monitoring of motors, pumps, fans, compressors, and turbines. Sub-base isolation optimizes base strain sensitivity, minimizes influence of mounting on sensor data, and protects against ESD. Electronics are isolated from sensor case for immunity against RFI, which can corrupt sensor data. Constructed of 316L SS with true hermetic sealing, PV 102 is shipped with ¼-28 to ¼-28 and ¼-28 to M8 mounting studs.

Wilks Enterprise, Inc.    East Norwalk, CT 06855
Jun 16, 2011 Providing on-site measurement of SF6, InfraRan Specific Vapor Analyzer is suited for fume hood evaluations as per ASHRAE 110 as well as determining airflow in ventilation systems, rooms, and buildings. Unit is factory-calibrated for measuring SF6 in 0-10 ppm concentration range with resolution to 0.01 ppm. Weighing less than 18 lb, analyzer has internal rechargeable battery for up to 8 hr of continuous field use or can be operated from 110/220 V power source.

Seaward Group USA    Tampa, FL 33634
Jun 16, 2011 Handheld, battery-operated Seaward Solar Installation PV100 carries out all electrical tests required by IEC 62446 standard for grid-connected PV systems. With push of single button, tester performs sequence of tests in safe and controlled manner, avoiding contact with exposed live DC conductors. Supplied MC4 and Sunclix test leads allow unit to be connected to all standard PV modules and arrays to test ground continuity, insulation resistance, open circuit voltage, and short circuit currents.

E Instruments International LLC    Langhorne, PA 19047
Jun 16, 2011 Enclosed in ABS shock-proof housing with IP54 rating for dust protection, Model AMI300 measures CO, CO2, temperature, humidity, air flow, air velocity, and current/voltage. Unit supports differential pressure modules, wireless probes, and variety of temperature, RH, and air flow probes. Supplied with calibration certificate, monitor includes backlit LCD, joystick navigation, Min/Max/Hold/Unit Selection, and ability to store up to 12,000 memory data points.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Jun 15, 2011 Active sensing face of 5-Way Adjustable Limit Switch Style Sensors can be adjusted for front, top, bottom, left, or right facing targets and include 4-corner LEDs that guarantee 360° visibility. Designed for 10-30 Vdc operation and featuring category IP68/69K protection, they are weather resistant, waterproof, and heat resistant as well as resistant to UV light. Sensors operate in temperatures from -25 to +85°C and are available in 15, 20, 30, and 40 mm sensing ranges.