Thermo Electron Corp.    Waltham, MA 02454
Jan 08, 2007 Built to withstand continuous use in severe conditions, Orion 1100 Series combines 6-button operation with LCD display and IP66 rating. Orion 1102PH features auto-buffer-recognition to provide choice of US, NIST, and pure low-ionic pH buffer standards. Incorporating Galvanic oxygen probe technology, Orion 1103DO dissolved oxygen monitor takes 40-50 sec to attain 95% of actual readings, while Orion 1104CD conductivity monitor offers 7 ranges and max measurement range of 1,000 mS/cm.

Thermo Electron Corporation / Molecular Spectroscopy    Madison, WI 53711-4495
Jan 08, 2007 Used for transfer of petroleum products, ultrasonic AutoFLOW consists of inline, multi-path transit time flow meter that uses 32-bit industrial processor with DSP and incorporates all required API-approved algorithms and software. Meter offers ±0.15% flow accuracy and ±0.05% repeatability. Intrinsically safe transducer design eliminates possibility of sparks, while spool piece features ATEX Zone 0 Intrinsically Safe certification, allowing it to be used in hazardous environments.

Thermo Electron Corp.    Waltham, MA 02454
Jan 08, 2007 Utilizing infrared energy and attenuated total reflectance, CrystalVision(TM) CO2 Sensor measures CO2 concentrations in carbonated beverages such as beer, soda, and carbonated water. Unit operates 24/7 and can withstand clean-in-place cycles. Sensor monitors only true CO2, and is not affected by pressure spikes or extraneous gases, such as dissolved oxygen or nitrogen. It installs into standard Varinline® access port and connects to wall-mounted control display.

Control Co.    Houston, TX 77258 8307
Jan 05, 2007 With range of -99.9 to 199.9°C and 0.1° resolution, Traceable® -100.0 RTD Platinum Freezer Thermometer is suitable for monitoring temperatures in freezers, water baths, heating blocks, incubators, and refrigerators. Ten foot micro-cable permits freezer doors to close on it without affecting seal. Operating on 9 V battery, thermometer is supplied with 100 W triple-purpose platinum probe for liquids, air/gas, and frozen material.

American Sensor Technologies, Inc.    Mt. Olive, NJ 07828
Jan 05, 2007 Through utilization of Krystal Bond Technology, Model AST4800 incorporates one-piece stainless steel sensing element that is free of silicone oil, welds, or O-rings, eliminating chance of contamination from outside media. Unit features temperature range of 4-220°F and operates over pressure ranges of 0-500 and 0-10,000 psi. With overall length of less than 2 in. and diameter of 0.7 in., sensor delivers 10 mV/V output with response time of less than 1 msec.

VACUUMSCHMELZE GmbH & Co.    Elizabethtown, KY 42701
Jan 05, 2007 Current sensors monitor ac power output of solar systems into power grid and measure its dc component. Common mode chokes, available for 250/380 V mains operation as well as dc voltages up to 1,000 V, can be installed at inverter input or grid output to block or damp undesired interference voltage levels that could cause EMI between electronic devices. Chokes' nanocrystalline tape wound cores enable construction of filters with long-term temperature stability.

Packet Island Inc.    Santa Clara, CA 95051
Jan 05, 2007 Housed in 4 x 4.5 in. brushed aluminum case, Micro-Appliance provides essential part of PacketSmart Software-as-a-Service solution. System enables VoIP service providers and VARs to pre-assess SMB networks for VoIP readiness while also providing VoIP monitoring service to ensure carrier-grade service levels. In addition to VLAN support, plug-and-play appliance offers fail-safe operation, ability to work in front of NAT firewalls, and ability to work with mirrored switch ports.

MAGPOWR    Oklahoma City, OK 73114
Jan 05, 2007 Digital Tension Meter (DTM) displays web tension in applications where access to control parameters is not required or inconvenient for operator. LCD readout features 0.6 in. red digits and selectable decimal point. To ensure operation in wash-down or dusty environments, meter is constructed with high-impact plastic case and sealed front panel. DTM features DIN rail mounts and simplified wiring connections to facilitate installation.

Mid-West Instrument    Sterling Heights, MI 48314
Jan 04, 2007 Suited for stationary and mobile applications, Models 115/116 feature dry bellows design with internal bi-directional relief valves with no liquid fill required to protect unit from over-range. Gauges offer differential pressure ranges of 0-10 in. to 0-415 in. H₂O. They work for vertical or horizontal tanks and are available with custom dial faces.

Ion Physics Corp.    Fremont, NH 03044
Jan 04, 2007 Able to measure pulse currents up to 50,000 A, CM-1-E-beam current transformer combines 10 nanosecond risetime and 10 mV/A output sensitivity. It is constructed to operate in either vacuum or atmospheric pressure and has 8 in. ID and 12 in. OD. While designed as E-beam monitor, unit can also measure high-frequency transients on conductor carrying high dc or ac currents with minor modifications.

Macro Sensors    Pennsauken, NJ 08110 1334
Jan 04, 2007 For mechanical position measurement where hard connection can be made to test piece, blind-bore HSI 750 and through-bore HSIR 750 Series of free-core LVDTs provide 4-20 mA current loop output. Units are ¾ in. in dia and are available in full ranges from 0.10-20 in. For applications where hard mechanical connection cannot be made between sensor's moving core and test piece, GHSI 750 and GHSIR 750 Series of spring-loaded LVDTs are available in full ranges of 0.10-4 in.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Jan 04, 2007 Featuring psi scales with 1.5% full-scale accuracy, 2.5 in. series FBG Forged Brass Gauges are filled with glycerin oil to dampen out vibration. Wetted parts include brass socket and phosphor bronze Bourdon tube. Suited for hydraulic equipment, gauges are available in ranges from full vacuum, compound to 10,000 psi, and withstand temperatures from 30-160°F.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Jan 04, 2007 Series TEFG gauges possess dual psi and bar scales with 1.5% FS accuracy. Designed with one-piece PVDF mold to promote durability and minimize risk of fill loss, series features wetted parts that include PVDF connection and PVDF diaphragm. Each unit can withstand temperatures of -4 to +140°F, and ranges are available from 15-200 psi. Available with ¼ or ½ in. female NPT bottom connection, gauges are suited for use in water treatment and chemical feed systems.

Berkeley Nucleonics Corp.    San Rafael, CA 94901
Jan 04, 2007 Spectroscopic portal monitor, FIND (Flexible Illicit Nuclear Detection), detects and identifies radioactive materials in moving vehicles in real-time. Adaptable to multiform applications, it can monitor for radioactive materials in highway-speed vehicle traffic as well as slow moving items. Automatic, network-ready solution comes in weatherproof, EMI/RFI-resistant enclosure and offers wireless connectivity as well as separate audio and visual alarms.

Allegro MicroSystems Inc.    Worcester, MA 01615
Jan 03, 2007 Bidirectional ACS712 and unidirectional ACS713 hall-effect current sensors feature integrated shield that attenuates high dv/dt transients across leadframe. Filter pin addresses output noise and low current accuracy without attenuation effects of external RC filter. Suited for motor control applications, devices are offered in SOIC8 package.

Mahr Federal Inc.    Providence, RI 02905
Jan 03, 2007 Weighing 14 oz, Pocket Surf® PS1 employs inductive probe and offers USB connectivity, optional PC software, and memory for results storage. Most frequently used parameters are directly selectable, with others accessible via scrolling function keys. Cutoff lengths are freely selectable, and there is no need for external calibration. While 0.7 mN measuring force and 350 µm max measuring capacity promotes application versatility, USB interface enables PC transfer and storage of data.

Baumer Ltd.    Southington, CT 06489 1534
Jan 03, 2007 Suited for limited space automated processing, robotics, and material handling, miniature Model OADM 13 delivers consistent, non-contact measurement independent of color and surface texture. Offering 10 mm resolution and 900 ms measuring cycles, unit features dot or line-shaped laser beam options. Self-contained sensor measures 13.4 x 40 x 48.2 mm and requires no external control units. Unit includes IP67-sealed, die-cast housing; industrial glass optics; and laser LED.

LEM Holding SA    Plan-les-Ouates CH-1228  Switzerland
Jan 03, 2007 Comprised of 12 sensors, HAB series measures battery-pack current in electric, hybrid, and conventional vehicles without breaking battery power bus. Models are based on open-loop, Hall-effect transducers and offer choice of voltage or PWM outputs. Featuring response time of under 10 msec, sensors are available with primary current measuring ranges that cover ±20 to ±120 A range with ±2% accuracy across operating temperature range of -40 to +125°C.

ATI Industrial Automation    Apex, NC 27639
Jan 03, 2007 Suited for applications using 3-5 kg capacity robots, Model SR-61 helps prevent damage to robotic end-effectors resulting from robot crashes. In operation, sensor is adjusted to support typical loads experienced by robot arm in all directions including angular, compression, and torsional. Sensor absorbs crash and resets itself within 0.001 in. of original position. Three-wire PNP proximity switch set to actuate within 0.020 in. of axial motion ensures reliable operation.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jan 03, 2007 Comprised of foil strain gages adhesively bonded to flat substrates made of metal, polymer, or composites, Micro-Measurements Hybrid Sensors measure force, displacement, pressure, and acceleration. They can be attached via mounting holes with screws, spot welding, or clamping. Sensors are available with pre-attached lead wires and connectors, simplifying customer handling by eliminating soldering. Miniature signal amplifiers are available as separate components or attached to sensors.