MTS Systems Corp. - Sensor Div.    Cary, NC 27513
May 11, 2007 Suited for food and beverage industries, LLH Sensors combine functionality of both level and linear position sensors. Units provide remote programming and diagnostic capabilities via serial communication over standard cabling to facilitate commissioning and troubleshooting. Compatibility with existing interface electronics is virtually guaranteed with various outputs, including analog, digital pulse, high-speed serial, synchronous serial interface, and fieldbus outputs.

GE Inspection Technologies, GmbH    Huerth 50354  Germany
May 11, 2007 To promote effective scanning of composite components and structures, Phasor XS is available with ultrasonic, phased array transducer that features 90% hard water acoustic material and 10% water gap. Portable instrument, compatible with various probes, can operate in conventional and phased array flaw-imaging modes. Latter allows detector to drive arrays with up to 64 elements, using any 16 of them to form virtual probe.

Invensys Systems, Inc.    Foxboro, MA 02035
May 11, 2007 Suited for low volume applications, non-invasive FT10 Electrodeless Sensor is equipped with virgin PFA Teflon®-wetted materials and leak-free weld connections. It is available with Teflon tube sizes of ½, ¾, or 1 in. and can measure process fluids with temperatures up to 284°F and pressures to 100 psig. Measuring 7 x 5 x 2 in., sensor is constructed of ultra high molecular weight polyethylene with flow-through design, and measures conductivity from 0-2,000 mS/cm.

CAST, Inc.    Woodcliff Lake, NJ 07677
May 10, 2007 JPEGLS-E Encoder Core implements the ISO/IEC 14495-1 JPEG-LS standard, an algorithm designed to compress continuous tone color and grayscale images with lossless or near-lossless levels of quality. Featuring processing rate up to 161 Msamples/sec on an FPGA, it enables HDTV processing, and includes automatic and programmable features for system integration.

Abbott Diabetes Care, Inc.    Alameda,, CA 94502
May 09, 2007 Providing accurate blood glucose results in about 5 sec, FreeStyle Lite(TM) offers virtually pain-free testing due to 0.3 µl blood sample required. It includes high-contrast display with backlight and allows people with diabetes to test on alternate parts of body such as forearm, thigh, and palm, instead of using sensitive fingertips. Electrochemical technology makes device suited for measuring small blood samples.

Banner Engineering Corp.    Minneapolis, MN 55441
May 08, 2007 Featuring liquid-tight PFA jackets, miniature WORLD-BEAM® Q12 Series is designed for wet and corrosive industrial environments. Products sense up to 1.5 m in opposed mode and 15, 30, and 50 mm in fixed-field ranges. No field adjustments needed, and visible red light source facilitates target positioning. Able to withstand up to 1,200 psi washdowns, 10-30 Vdc sensors have solid-state bipolar outputs: one current sourcing (PNP) and one current sinking (NPN).

HaiVision Systems Inc.    Montréal   Canada
May 07, 2007 Featuring all-digital pipeline, hai1000 enables audio and video from multiple cameras and displays to be transmitted over Internet for telepresence, medical communication, and distance education applications. Output supports HD 720p at 60 fps and also supports SD network video streams. Providing consistent image across different displays, system is offered with SDI input module supporting embedded AES/EBU or analog audio, similar SDI output module, and HDMI video output module.

Ametek Solidstate Controls    Columbus, OH 43085
May 07, 2007 Compatible with any industrial battery type and configuration, CellRX(TM) helps increase battery system reliability by continuously monitoring parameters such as voltage, current, and temperature. It can be configured with RS232/485 communications as well as TCP/IP or telephone modem, and integrated software enables trending of historical battery data. Fiber optics facilitate noise-free connection between controller and concentrators.

Physik Instrumente (PI)    Auburn, MA 01501
May 07, 2007 Based on ceramic encapsulated PICMA® multilayer actuator technology, Model P-871 closed-loop piezo bender actuator provides travel ranges up to 1,600 µm (2,000 µm in open loop) and prevents water diffusion into insulation layer. Featuring monolithic design, unit operates at ±30 V and has up to 150°C operating temperature range. Actuator can also be fitted with Models E-651.1S and E-651.2S bench-top units and E-614 OEM controller card for precise closed-loop motion control.

Lock Inspection Systems, Inc.    Fitchburg, MA 01420 6094
May 07, 2007 Capable of automatically selecting frequency needed for a product, Model MET30+ 3F can inspect poly-film and metallized packaged products. Built-in automatic product set-up ensures consistent performance by memorizing settings for up to 100 products, while two 32-bit microprocessors accelerate processing speed so product signal is interrogated 1,000 times/sec. With rugged membrane keypad design, unit suits use in harsh production environments.

Lock Inspection Systems, Inc.    Fitchburg, MA 01420 6094
May 04, 2007 MET 30+ Batchchek is equipped with PC touchscreen panel that enables product set-ups, tests, and diagnostics to be run from machine itself. Developed according to GMP guidelines, Windows-based Batchchek software lets pharmaceutical companies comply with 21 CFR Part 11 requirements. It implements all security access controls, user identification, audit trails, electronic records, and electronic signatures so that batches can be fully traced and accounted for in case of contamination.

Sciemetric Instruments Inc.    Ontario K2K 2P5  Canada
May 04, 2007 SigPOD NVH (noise, vibration and harshness) and SigPOD Torque testers are driven by process signature verification technology that captures and analyzes entire waveforms and transforms raw data into actionable information. QualityWorX manufacturing intelligence software utilizes acquired data to report on quality and to enable continuous process improvement by detecting and analyzing root causes of defects and solving problems in production processes.

Tendril    Boulder, CO 80301
May 04, 2007 Leveraging open standards, Tendril Network Operating Platform(TM) provides an open, extensible, scalable software platform that enables manufacturers and integrators to build ZigBee applications, deploy them in field, and manage them when operational. Tendril Monitor(TM) automates process of diagnostics and monitoring of quality, reliability, and day-to-day operations of ZigBee networks as well as applications built on those networks.

PCB Piezotronics Inc.    Depew, NY 14043 2495
May 03, 2007 Dynamic quartz force sensors exhibit rigidity that promotes repeatability and over-range protection required for automotive and component testing. ICP® and charge output sensors measure compression, tension, and impacts encountered in Life-Cycle, Durability and Fatigue, Impact, Drop and Crash, and Structural and Modal Testing as well as Penetration and Fracture Analysis. Configurations include ring, 3-component ring, link, impact, penetration, and strain styles.

Ametek Automation & Process Technologies    Clawson, MI 48017
May 02, 2007 Designed to provide single sensor for measurement of multiple layers of oil products and gas condensates, including water layers, multi-variable Series 7230 HT digital probes provide total level, interface level, up to 5 temperature readings, and diagnostic function. Accuracy is 0.01% of measured span; signal resolution and repeatability are .0001 in. Sensors have FM and CSA explosionproof rating for Class 1, Div 1, Groups A, B, C, D hazardous locations.

Dwyer Instruments, Inc.    Michigan City, IN 46361
May 02, 2007 Series RHL provides repeatable means of measuring humidity or humidity and temperature in harsh of environments. Unaffected by condensation, fog, humidity, or contaminants, polymer capacitance sensor offers years of calibration-free service. Humidity-only version consists of 2-wire transmitter with 4-20 mA loop powered output. Combination humidity/temperature version provides dual 4-20 mA output signals with accuracies of ±3% RH and ±0.9°F @ 72°F.

Slaughter Company    Lake Forest, IL 60045
May 01, 2007 Multifunctional 6330 offers test modes for AC Hipot, DC Hipot, Ground Bond, Insulation Resistance, Functional Run, and Line Leakage. In Functional Run mode, unit can monitor min and max readings for voltage, current, power, power factor, and leakage current. This allows manufacturers to ensure DUT is operating as intended. Tester offers 10 memory locations, with 20 steps per memory, and single step mode. For remote testing, 6330 has PLC remote control with safety interlock.

Energen, Inc.    Lowell, MA 01854
May 01, 2007 Able to achieve image stability to 35 µrad, Energen Image Stabilization System consists of gyrosensor that measures vibration, lens assembly with CCD, digital signal processor, and resident software that enables fully automatic operation. System senses vibration and counteracts its effect (up to 100 Hz) via software-controlled optical elements so that CCD effectively sees Hi-Res image. Applications include mobile-, ground-, air-, or space-based observation platforms.

Extech Instruments Corp.    Nashua, NH 03063
Apr 30, 2007 Suited for installation and repair of electrical systems, HVAC equipment, and large appliances, Model TK430-IR Industrial Troubleshooting Kit measures 9.5 x 6.8 x 2.8 in. It comes with Model EX430 True RMS autoranging digital multimeter, Model MA200 400A AC clamp meter, 42510 mini IR thermometer, 40130 non-contact voltage detector, set of CAT III-1000V test leads, Type K thermocouple bead probe, Type K banana input adaptor, multimeter hanging strap, and batteries.

Spectronics Corp.    Westbury, NY 11590
Apr 30, 2007 Spectroline® BigEZ(TM) contains enough fluorescent dye to treat systems containing up to 16 gal of lubricant, and features disposable dye cartridge, which is calibrated in 1/8 oz increments. Injector consists of handle/threaded shaft and collar assembly, 4 oz solvent-free AR-GLO® fluorescent leak detection dye, and hose assembly with low-loss fitting. Cartridges are available for mineral oil, polyol ester and alkyl benzene lubricants.