Harvard Apparatus, Inc.    Holliston, MA 01746 1371
Oct 14, 2011 Providing continuous measurement of end-tidal CO2 through infrared spectroscopy sensor, Type 340 Capnograph is suitable for breathing ranges from 0-300 bpm. Data is displayed in real time; and with analog ports, data can be collected simultaneously with most commercial data acquisition systems. Optional flow heads expand Capnograph to measure Peak Inspiratory and Expiratory Flow, Peak Inspiratory Pressure, Positive End Expiratory Pressure, and Tidal Volume.

NK Technologies    Campbell, CA 95008
Oct 13, 2011 Packaged in 35 mm wide DIN rail enclosure, VTD Series offers solution for monitoring, detecting, and diagnosing voltage conditions in DC-powered installations, including industrial motors, battery chargers, photovoltaic arrays, and wind generators. Units operate on circuits from 0-15 to 0-600 Vdc and deliver fully isolated 4-20 mA loop-powered output, facilitating use with controllers, data loggers, and SCADA equipment. To maximize safety, input and output circuitry is fully isolated.

E Instruments International LLC    Langhorne, PA 19047
Oct 12, 2011 Featuring ABS shockproof housing with IP54 rating for dust protection, Model AQ200 measures CO2 from 0-5,000 ppm, CO from 0-1,000 ppm, and ambient temperature from -4 to 176°F as well as Delta T, atmospheric air pressure, and humidity. IAQ monitor includes Ice Blue LCD with 2-line display, Min/Max/Hold/Unit selection, and 8,000 data memory points. Memory and software are provided.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Oct 12, 2011 Along with backlit display and 1 m sensor cable, battery-operated MiniTest 650 features one-pole sensor made of wear-resistant carbide material. Ram- and impact-protection is provided through rubber rimmed casing, and USB interface enables connection to PC. Unit comes in 3 models: with magnetic-induction sensor for measurements on steel substrates; with eddy currents sensor for measurements on non-ferrous metals; and with dual sensor for measuring on both steel or non-ferrous metals.

PREMO Group    Barcelona   Spain
Oct 11, 2011 With double supply voltage of ±12 to ±18 Vdc, SY Series measures DC, AC, and pulse currents on PCBs. Units feature isolation voltage of 3 kV and are designed for nominal currents of 5, 10, 15, 20, 25, and 50 A. Output signal is centered at 0 V with output voltage of ±4 V, allowing detection of currents up to 3 times nominal value. In addition, sensors provide linearity less than 0.1% with ±0.7% accuracy levels, and bandwidth up to 150 kHz with response time below 1 µsec.

Mettler-Toledo International Inc.    Greifensee 8606  Switzerland
Oct 10, 2011 Designed to measure key parameters such as specific weight, refractive index, and pH value in one fully automated process, LiquiPhysics Excellence Meters monitor production of food flavorings, from raw product up to final flavor. Depending on number of samples, measuring devices can be operated by automation units to measure either individual samples or sample series. LabX 2010 laboratory software enables LiquiPhysics Excellence measuring systems to be integrated into ERP systems.

Sensirion Inc.    Westlake Village, CA 91361
Oct 07, 2011 Designed exclusively for temperature measurement, STS21 comes in 3 x 3 mm DFN package to accommodate space-limited applications. Fully calibrated product provides digital output and delivers ±0.22°C accuracy over 5 to 60°C range. Pin- and protocol-compatibility with SHT21 humidity sensor enables swap-out in situations where temperature measurement is required and humidity measurement is optional.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Oct 07, 2011 Comprised of repeatable pressure switches combined with precision pressure gauge, Series AT3A3000 employ Magnehelic® gauge design and come in flame-proof enclosure. ATEX-approved Photohelic® switch/gauge products measure and control positive, negative, or differential pressure of air and compatible gases. Standard models are rated to 25 psig, with options to 35 or 80 psig. All feature phototransistor-actuated, DPDT relays for low/high limit control and adjustable set point indicators.

Advanced Thermal Solutions Inc.    Norwood, MA 02062
Oct 06, 2011 Used for characterizing thermal conditions in electronic systems, MS 1000-CS-WC is calibrated for natural convection as well as high velocity flows and has plastic base that eliminates potential shorting issues. Candlestick-shaped profile minimizes disturbance of heat flow in test domain, while plastic-sleeved stem facilitates installation and repositioning during testing process. Product is capable of measuring temperature from -30 to +150°C ±1°C and velocity from 0-10,000 fpm ±2%.

AutomationDirect.com    Cumming, GA 30040-9905
Oct 06, 2011 Designed for air, non-corrosive gas, and non-flammable gas applications, ProSense digital pressure switch/transmitters are fitted with 2 m cable, feature 3-color LCD, and provide 2 digital outputs and one analog output. Digital devices, offering 3 operation modes and 6 pressure unit conversions, also have vacuum to pressure ranges of -14.5 to 14.5 psi, selectable response times, zero reset, and lockable keypad. Each unit is cULus-, CE-, RoHS-, and Reach-approved.

Mark-10 Corp.    Copiague, NY 11726
Oct 06, 2011 Models 5i and 3i, featuring backlit graphic LCDs and Plug and Test(TM) technology, save all calibration and configuration data within sensors' smart connectors. Force sensors are available in capacities up to 10,000 lbf, and torque sensors are available in capacities up to 5,000 lbf-in. At up to 7,000 Hz, Indicator sampling rates enable accurate results for quick-action tests. Data can be transferred to PC or data collectors via USB, RS-232, Mitutoyo, or analog outputs.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Oct 06, 2011 Suitable for level monitoring in well and borehole applications, Series MBLT has 316 SS body and nose cap as well as 316 SS body top, which is tapered to prevent damage or snares when pulling unit out of installation. Miniature transmitter offers choice of polyether polyurethane or ETFE cable materials, which are vented for barometric pressure compensation. Available in pressure ranges from 15-690 ft w.c., unit provides ±0.25% full scale accuracy.

MaxLite    West Caldwell, NJ 07006
Oct 05, 2011 Available in 4- and 6-lamp configurations, T5 HighBay Lighting Fixtures offer replacements for HID and fluorescent fixtures used in new and retrofit commercial projects. Units feature polished reflector for max lumen output and universal voltage ballast with hinged door for access without taking down fixture. Crafted of 20-gauge galvanized die-formed steel with white baked-on enamel, fixtures operate on 120 and 277 V systems and include 10 ft long, 3-wire cord with plug.

Electro-Sensors, Inc.    Minnetonka, MN 55343 9108
Oct 05, 2011 Employed to protect against breakdowns and machinery failure, Electro-Sentry 1 is commonly used on grain elevator legs to monitor critical points for shaft slowdown, belt alignment, and bearing temperature. Single-leg, stand-alone system delivers at-a-glance alarm identification, 13 analog inputs, 8 relay outputs, and one-button test capabilities. All components provide 4-20 mA signal compatible with IS Barriers, PLCs, meters, and DAQ systems.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Oct 05, 2011 Model 3306A1 piezoelectric accelerometer measures vibration at extreme temperatures in aerospace, automotive, industrial, and military applications. Suited for cryogenic conditions, unit incorporates self-generating, quartz shear sensing element, with integrated IEPE electronics, that enables flat temperature response down to -420°F. Hermetically sealed product features stainless steel construction, is case isolated, and incorporates 2-pole low-pass filter. Sensitivity is 5 mV/g.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Oct 04, 2011 Measuring 11 x 12 x 2.1 mm and operating from -40 to +125°C, SV03 series detects angle of rotation of switch to provide rotary switch and feedback sensor in consumer electronics (CE), appliance, and automotive applications. Precision devices, featuring operating voltage of +5 Vac within ±0.5 V, provide rotational measurement within ±2% across entire 333.3° of rotation. Rated at up to 300,000 cycles, products suit long service life applications.

Advanced Micro Peripherals    New York, NY 10001
Oct 04, 2011 Offered on single PCI/104 form factor board, H264-ULL-SD4 provides flexible solution for capturing and compressing up to 4 NTSC/PAL analog video inputs at full size and full frame rate to H.264/MPEG-4 AVC (Part 10) standard. Encoder can also perform stream duplication, allowing creation of different resolutions and compression settings to match requirements. Capabilities suit defense, transportation, remote platforms, and situational awareness applications.

Electro-Sensors, Inc.    Minnetonka, MN 55343 9108
Oct 04, 2011 Available as integral part of Electro-Sentry1 Hazard Monitoring System or as stand-alone unit, Model FB420 provides 4-20 mA signal directly proportional to rotational speed of monitored shaft. Four-digit LCD, capable of displaying 0.000-9999 rpm or 4-20 mA, facilitates calibration and troubleshooting. Equipped with relay that can be programmed for failsafe over-speed/under-speed alarm, sensor is suited for belt conveyors, drag conveyors, bucket elevators, fans, blowers, and pumps.

Ashcroft Inc.    Stratford, CT 06614
Oct 03, 2011 Available in 4 ½, 6, and 8 ½ in. diameters, Type 1082 provides ±0.25% FS accuracy in ranges from vacuum through 10,000 psi. External zero adjuster, temperature compensation, and Monel® wetted parts ensure precision and media compatibility. For field calibration, 3 in. Type 1084 pocket test gauge covers ranges to 1,000 psi with 0.5% FS accuracy.

SAW instruments GmbH    Bonn D-53177  Germany
Sep 29, 2011 Featuring 2 sensor chips to aid parallel processing of samples, sam®X uses Surface Acoustic Wave technology to detect mass binding and protein conformational changes on whole cells in real time. It does not require complex labeling methods and can be used to investigate living cells. Using fluidics, each channel can by utilized independently or via sequential combinations of 4 x 2, 2 x 4, or 1 x 8 channels. Different ligands can be immobilized online at each chip position automatically.