Midtronics, Inc.    Willowbrook, IL 60521
Aug 13, 2008 Suited for UPS environments, Cellguard Battery Monitoring System utilizes advanced wireless intra-system communications architecture that facilitates installation. System features wireless communications technology, and web and server-based data management.

American Sensor Technologies, Inc.    Mt. Olive, NJ 07828
Aug 12, 2008 Constructed of one-piece stainless steel, CE approved Model AST20HA contains no internal O-rings and is equipped with 100 V/m of EMI/RFI protection from electrical noise. ASIC design features real-time thermal compensation and linearity correction. Operating from -40 to 185°F, AST20HA provides pressure ranges from 0-25 psi to 0-10,000 psi and is available in compound ranges up to 2,500 psi. Output options include 4-20 mA, 1-5 V, 1-10 V, and 0.5-4.5 V ratiometric.

Macro Sensors    Pennsauken, NJ 08110 1334
Aug 12, 2008 Constructed of SS and hermetically sealed against hostile environments to IEC standard IP-68, LP 750 Series low voltage sensors suit hydraulic cylinder and valve position sensing within agricultural and construction equipment. Available in standard ranges of 3.75-24 in., units are offered in 3 outputs including 5 Vdc input with 0.5-4.5 Vdc output (LPVR Series), pre-calibrated, loop-powered 4-20 input/output (LPIR Series), or nominal 24 Vdc input 0-10 Vdc output (LPER Series).

Pressure Systems, Inc.    Hampton, VA 23666
Aug 12, 2008 Designed for small-bore applications, Series 300 level and pressure transducers are protected against fast rising voltage transients via 2 surge protection components: one in 0.75 in. OD 316 housing of transducer and one at surface. Waterproof products withstand harsh environments that contain hostile fluids and gases and are available with option of welded 316 SS or titanium construction. Each integrates pressure sensor assembly and optional chemical-resistant ETFE cable jacket.

AKCP Co. Ltd    Bangkok 10900  Thailand
Aug 11, 2008 Able to monitor temperatures between -55 to +75°C with ±0.5°C accuracy, daisyTemp comes with 5 ft sensor cable that can be extended using Ethernet cable with maximum total length of 500 ft. Up to 8 sensors can be stringed together and plugged into 1 securityProbe Intelligent Sensor port. Collected temperature values can be used to trigger alerts such as e-mail, SMS, phone calls, and SNMP traps.

Onset Computer Corp.    Bourne, MA 02532
Aug 11, 2008 Able to be mounted outside weather station enclosure, Barometric Pressure Smart Sensor is compatible with web-based HOBO® U30 Remote Monitoring Systems and other weather station products. Sensor measures barometric pressure over range of 660-1,070 mb. It can be automatically recognized without complex wiring, programming, or calibration requirements.

LEVITON    Melville, NY 11747
Aug 08, 2008 OSSMD, OSSMD-G, and OSSMD-F combine bi-level switching with passive infrared and ultrasonic technology for accurate occupancy detection. OSSMD has dual manual-override switches to toggle on/off status of each lighting load. OSSMD-G suits retrofit applications, while OSSMD-F uses auto or manual-on for exhaust fan operation. Series is rated 800 W incandescent and 1,200 VA for magnetic low-voltage and fluorescent lighting at 120 Vac, and 2,700 VA fluorescent at 277 Vac.

IOtech, Inc.    Bedford Heights, OH 44146-1833
Aug 08, 2008 With DASYLab driver support, IOtech 652u Dynamic Signal Analyzer is 10-channel, 24-bit, simultaneous sampling USB 2.0 device that offers 4 mA IEPE per channel. Allowing for connection to any eZ-TOMAS system accessible on user's plant's network, eZ-TOMAS Remote software enables single remote client to connect to multiple eZ-TOMAS systems for simultaneous remote monitoring. Additionally, single eZ-TOMAS system can serve data to multiple remote clients.

Palmer Wahl    Ashville, NC 28804
Aug 07, 2008 Wahl® DST600 uses thin-film platinum RTD sensor along with self-testing circuitry which continuously verifies electronics to ensure reading accuracy, rated ±0.3°F over -50 to +500°F temperature range. Offered as drop-in mercury-in-glass (MIG) thermometer replacement, solution is available with MIG standard tapered bulb chambers or variety of probe configurations. It meets FDA Proposed Rule change to 21 CFR Part 113 as well as current USDA 9CFR318.300 and 9CFR381.300 standards.

GE Sensing    Billerica, MA 01821
Aug 07, 2008 Phasec 3 is single-frequency instrument for crack and corrosion detection and conductivity and coating measurements, while Phasec 3s adds dynamic rotating inspection capability and Phasec 3d adds dual-frequency capability to 3s for inspection at 2 different depths. Devices feature ¼ VGA TFT display with choice of 8 color combinations to differentiate between stored and active signals. Units have onboard memory for 200 setups and 200 traces, USB connectivity, and battery life up to 6 hr.

Turner Designs    Sunnyvale, CA 94086
Aug 07, 2008 Incorporating 3 optical sensors, C3 Submersible Fluorometer can detect in vivo Chlorophyll a, blue green algae, rhodamine WT dye, crude oil, CDOM, optical brighteners, as well as turbidity in freshwater, coastal, and open ocean applications. C-Soft user interface enables intuitive calibration, data logging, and data management. Digital data output allows for integration with existing water monitoring systems such as CTDs, dataloggers, vessels of opportunity, and buoys.

IMI Sensors, Div. of PCB Piezotronics    Depew, NY 14043-2495
Aug 06, 2008 Series 686B USB Programmable Smart Vibration Switch is designed for continuous monitoring and protection of cooling towers, fin fans, pumps, HVAC systems, and other critical machinery. Electronic switch offers remote reset capability and USB programmable delays to avoid false trips. Requiring 2 wires, universally powered unit is hermetically sealed, mounts with single stud, and is available for use in hazardous areas.

Lee Company, The    Westbrook, CT 06498 0424
Aug 06, 2008 Weighing 6 g, Model 281 Zero Leak PRI is designed for thermal relief and low flow hydraulic pressure relief applications where zero leakage is needed. Flow rates range from few mLs per minute for thermal relief applications and up to 250 mL/min for low flow pressure relief applications. Working temperature is -65 to +275ºF, while cracking pressure is preset with capabilities ranging from 1,300-4,700 psid.

VXI Technology Inc.    Irvine, CA 92614
Aug 06, 2008 LXI Class A compliant EX1000A Series instruments integrate signal conditioning, digitization, and software to offer complete DAQ solution for precision temperature and voltage measurements. Open-architecture 1U modules also incorporate complete end-to-end self-calibration, and support sampling rates of up to 1,000 Sa/sec/ch with typical accuracies of ±0.2°C (temperature) or 0.05% + 10 µV (voltage). Thermocouple and voltage channels can be combined in 16, 32, or 48 channel configurations.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 05, 2008 Suited for microprocessor and MCU power-monitoring applications, MAX6394 integrates highly precise bandgap reference which allows for trimming reset thresholds to as much as ±0.6% accuracy at room temperature. Unit has 9 fixed voltage thresholds, each with 0.7, 14, 105, and 826 msec preset timeout periods. Operating between -40 to +125°C automotive temperature range, it provides open-drain output that can be pulled up to 6 V, even when VCC is less than pull-up voltage.

Madison Company    Branford, CT 06405
Aug 04, 2008 Constructed from high-strength stainless steel, models MAD4500 and MAD4510 are approved to UL/cUL913 (CSA 157) Class I Div 1, Groups C, and D for use in intrinsically safe areas with approved barrier. They utilize diaphragm technology and solid state design that provide high accuracy in various vessel configurations with liquid pressure up to 100 psig. Compatible with range of liquids, units are suitable for ground water level depth measurement and earthen and concrete dams.

ARI-Armaturen    Stukenbrock   United Kingdom
Aug 04, 2008 CONA All-in-One solution integrates steam trap, isolation valves, strainer, check valve and blowdown valve and requires just two pipe connections. Multi-valve system performs functions such as isolation, safety, control and steam trapping, and suits industrial applications including main line draining, steam distributing and tracing systems, as well as process industry.

Dynapar    Gurnee, IL 60031
Aug 04, 2008 With low profile that enables mounting onto stepper and servo motors, M53 modular commutation encoder has direct-read phased array ASIC that provides 2,500 ppr. It comes with commutation tracks for 4, 6, or 8 pole brushless motors, and uses built-in gapping mechanism that requires no special tools or parts that can get lost or damaged. With ability to accommodate motor shafts from ¼ to ½ in. including metric sizes, encoder is suitable for use with variety of motors.

Matrix Systems    Miamisburg, OH 45342
Aug 04, 2008 Used for monitoring access doors and alarm points in local/remote locations, Frontier(TM) v5.7.5 includes fault-tolerant door controller option with 3-tier data distribution redundancy to ensure access control connectivity. Maintenance Mode blocks alerts to security personnel for testing, repairing, and/or modifying access door or alarm point while it is alarmed, and selective access can be disabled by individual access group assigned to badge based on inactivity/disuse of access areas.

Omega Engineering, Inc.    Stamford, CT 06907
Aug 04, 2008 Suited for transportation, pharmaceutical, and semiconductor industries, OM-MICROLITE pocket size portable temperature data logger comes with USB interface, enabling fast track communication. CE marked, IP68 rated product is dust- and water-proof, and features 3 V lithium battery and numeric LCD display. It works with MICROLAB-LITE software, has 16,000 sample memory, and operates in -40 to 176ºF temperatures.