Measurement Specialties, Inc.    Hampton, VA 23666
Aug 14, 2008 Available in ±10g to ±500g ranges, Model EGPE-1A provides flat frequency response up to 15 kHz. IEPE type accelerometer is hermetically sealed and features through hole mount installation for use with standard mounting screws. With micro-g resolution, unit is suited for broad range of vibration measurements.

Toshiba America Electronic Components (TAEC)    Irvine, CA 92618-1811
Aug 14, 2008 Incorporating photodiode, current amplifier, and luminous-efficiency correction, Model TPS859 can turn keypad or LCD backlight on or off, or adjust brightness according to ambient light condition. Unit features typical light current of 230 µA, and optical filtering technology, which enables incandescent to fluorescent light sensitivity ratio of 1.0. Housed in 1.6 x 1.6 x 0.55 mm surface mount package, TPS859 operates from 1.8-5.5 V, making it suited for battery-powered applications.

Microteknix    Pottstown, PA 19465
Aug 14, 2008 Designed to monitor and protect against temperature, humidity, and dewpoint events, Model EPC-2374 records sequentially formatted history and event logs by time and date. Unit allows for 3 independent contact outputs, each configurable for single event, or multiple logically configured events. Additional features include configurable audible alarm, ability to connect external phone dialer, and logic engine that supports up to 4 nested levels of user-created logic.

Omron Corp.    Kyoto 600-8530  Japan
Aug 14, 2008 Designed to monitor back electromotive force of machine's motor to judge whether machine has stopped operating, Model G9SX-SM includes off-delay timer that is set to unlock Guard Lock Safety Door Switch after operation has stopped. Model G9SX-LM, using proximity sensor to monitor standstill and speed conditions, allows machine to operate with door of protective fence open only when rotational speed of hazard source is below pre-set threshold and operator is pressing enabling grip switch.

Hubbell Inc. (Delaware) / Wiring Device-Kellems Division    Milford, CT 06460
Aug 13, 2008 Designed for high mounting applications, HBA WASP(TM) Fluorescent High Bay Occupancy Sensor promotes energy conservation by using passive infrared (PIR) technology for occupancy detection. PIR lens provides 1.4:1 coverage up to 40 ft and is available with single or dual outputs. While single output sensor features primary timer for ON/OFF control, dual output sensor features 2 timers for multiple light level control (step dimming) as well as Smart Cycling(TM) technology.

Hanwell Instruments Ltd.    Centerbrook, CT 06409
Aug 13, 2008 Enabling wireless monitoring, rl4106 temperature and humidity transmitter features real-time alarm notification and allows historical analysis of data. Unit includes onboard temperature sensor and humidity sensor, which can be mounted internally to transmitter body, externally on case, or remotely on probe. Powered by 3.6 V AA Li-Ion battery, it includes LCD screen that simultaneously displays recent readings and predicted battery life.

Panasonic Electric Works Corporation of America    New Providence, NJ 07974
Aug 13, 2008 Available in 3 port sizes with total of 8 flow rate ranges of 0.5-1,000 Lpm, FM-200 Series is bi-directional digital flow sensor for use with air or Nitrogen gas that offers high precision detection of 3% F.S. Unit utilizes 2 temperature sensors, one on each side of a heater element, to determine heat distribution, providing accurate detection, regardless of flow direction. It has ability to display real time flow rate of any process and can function as a flow meter.

Danaher Tool Group    Hanover, MD 21076
Aug 13, 2008 Designed to help with TPMS sensor maintenance during tire and rim changes, GearWrench® Tire Pressure Monitoring System Kit features sliding adjustable torque scale for setting and audible alert that indicates when predetermined torque value has been reached. Quarter inch flexible drive for screwdriver or torque wrench can accommodate up to 120 lb of air pressure. Kit also includes valve stem tool and 2 commonly used sockets for TPMS sensor maintenance.

NAPCO Security Group    Amityville, NY 11701
Aug 13, 2008 Enabling precision detection of even minute particles produced by clean-burning fires, GEM-SMK can detect all types of fires including paper, wood, gasoline, polystyrene, and smoldering fires. Photoelectric smoke detector eliminates need for home and business owners to run wires throughout their properties. It includes batteries with 5 yr life, mounting kit, and built in LED status indicator that alerts users when their battery is low or device is in need of cleaning.

Midtronics, Inc.    Willowbrook, IL 60521
Aug 13, 2008 Suited for UPS environments, Cellguard Battery Monitoring System utilizes advanced wireless intra-system communications architecture that facilitates installation. System features wireless communications technology, and web and server-based data management.

American Sensor Technologies, Inc.    Mt. Olive, NJ 07828
Aug 12, 2008 Constructed of one-piece stainless steel, CE approved Model AST20HA contains no internal O-rings and is equipped with 100 V/m of EMI/RFI protection from electrical noise. ASIC design features real-time thermal compensation and linearity correction. Operating from -40 to 185°F, AST20HA provides pressure ranges from 0-25 psi to 0-10,000 psi and is available in compound ranges up to 2,500 psi. Output options include 4-20 mA, 1-5 V, 1-10 V, and 0.5-4.5 V ratiometric.

Macro Sensors    Pennsauken, NJ 08110 1334
Aug 12, 2008 Constructed of SS and hermetically sealed against hostile environments to IEC standard IP-68, LP 750 Series low voltage sensors suit hydraulic cylinder and valve position sensing within agricultural and construction equipment. Available in standard ranges of 3.75-24 in., units are offered in 3 outputs including 5 Vdc input with 0.5-4.5 Vdc output (LPVR Series), pre-calibrated, loop-powered 4-20 input/output (LPIR Series), or nominal 24 Vdc input 0-10 Vdc output (LPER Series).

Pressure Systems, Inc.    Hampton, VA 23666
Aug 12, 2008 Designed for small-bore applications, Series 300 level and pressure transducers are protected against fast rising voltage transients via 2 surge protection components: one in 0.75 in. OD 316 housing of transducer and one at surface. Waterproof products withstand harsh environments that contain hostile fluids and gases and are available with option of welded 316 SS or titanium construction. Each integrates pressure sensor assembly and optional chemical-resistant ETFE cable jacket.

AKCP Co. Ltd    Bangkok 10900  Thailand
Aug 11, 2008 Able to monitor temperatures between -55 to +75°C with ±0.5°C accuracy, daisyTemp comes with 5 ft sensor cable that can be extended using Ethernet cable with maximum total length of 500 ft. Up to 8 sensors can be stringed together and plugged into 1 securityProbe Intelligent Sensor port. Collected temperature values can be used to trigger alerts such as e-mail, SMS, phone calls, and SNMP traps.

Onset Computer Corp.    Bourne, MA 02532
Aug 11, 2008 Able to be mounted outside weather station enclosure, Barometric Pressure Smart Sensor is compatible with web-based HOBO® U30 Remote Monitoring Systems and other weather station products. Sensor measures barometric pressure over range of 660-1,070 mb. It can be automatically recognized without complex wiring, programming, or calibration requirements.

LEVITON    Melville, NY 11747
Aug 08, 2008 OSSMD, OSSMD-G, and OSSMD-F combine bi-level switching with passive infrared and ultrasonic technology for accurate occupancy detection. OSSMD has dual manual-override switches to toggle on/off status of each lighting load. OSSMD-G suits retrofit applications, while OSSMD-F uses auto or manual-on for exhaust fan operation. Series is rated 800 W incandescent and 1,200 VA for magnetic low-voltage and fluorescent lighting at 120 Vac, and 2,700 VA fluorescent at 277 Vac.

IOtech, Inc.    Bedford Heights, OH 44146-1833
Aug 08, 2008 With DASYLab driver support, IOtech 652u Dynamic Signal Analyzer is 10-channel, 24-bit, simultaneous sampling USB 2.0 device that offers 4 mA IEPE per channel. Allowing for connection to any eZ-TOMAS system accessible on user's plant's network, eZ-TOMAS Remote software enables single remote client to connect to multiple eZ-TOMAS systems for simultaneous remote monitoring. Additionally, single eZ-TOMAS system can serve data to multiple remote clients.

Palmer Wahl    Ashville, NC 28804
Aug 07, 2008 Wahl® DST600 uses thin-film platinum RTD sensor along with self-testing circuitry which continuously verifies electronics to ensure reading accuracy, rated ±0.3°F over -50 to +500°F temperature range. Offered as drop-in mercury-in-glass (MIG) thermometer replacement, solution is available with MIG standard tapered bulb chambers or variety of probe configurations. It meets FDA Proposed Rule change to 21 CFR Part 113 as well as current USDA 9CFR318.300 and 9CFR381.300 standards.

GE Sensing    Billerica, MA 01821
Aug 07, 2008 Phasec 3 is single-frequency instrument for crack and corrosion detection and conductivity and coating measurements, while Phasec 3s adds dynamic rotating inspection capability and Phasec 3d adds dual-frequency capability to 3s for inspection at 2 different depths. Devices feature ¼ VGA TFT display with choice of 8 color combinations to differentiate between stored and active signals. Units have onboard memory for 200 setups and 200 traces, USB connectivity, and battery life up to 6 hr.

Turner Designs    Sunnyvale, CA 94086
Aug 07, 2008 Incorporating 3 optical sensors, C3 Submersible Fluorometer can detect in vivo Chlorophyll a, blue green algae, rhodamine WT dye, crude oil, CDOM, optical brighteners, as well as turbidity in freshwater, coastal, and open ocean applications. C-Soft user interface enables intuitive calibration, data logging, and data management. Digital data output allows for integration with existing water monitoring systems such as CTDs, dataloggers, vessels of opportunity, and buoys.