PCB Piezotronics Inc.    Depew, NY 14043 2495
Nov 11, 2011 Housed in miniature 0.25 in. cube, ICP® Model 356A03 features hermetically sealed titanium design. Cable strain relief connection with large crimp tube provides optimized shear and tensile strength. Compatible with any ICP® signal conditioner or readout device that includes ICP® power, Model 356A03 is suited for small component qualification, environmental stress screening, and vibration measurement with space restrictions.

Schmersal Inc.    Tarrytown, NY 10591
Nov 11, 2011 Designed to meet stringent North American and European approvals, RSS36 Series is suited for highest level of machine safety circuits, PLe per ISO13849-1 and SIL3 per IEC61508. RFID technology may be used in combination with Pulse-Echo technology in series circuit up to 31 devices while maintaining desired safety level. Providing holding force of 5 lb, magnetic latch option can serve as door stop. Diagnostic LEDs indicate errors, mis-alignment, and door open/closed signaling.

Electro-Sensors, Inc.    Minnetonka, MN 55343 9108
Nov 10, 2011 Offered with Hall-Effect or magnetoresistive sensors as well as single-channel or quadrature signaling, Series 18 sensors detect passing magnets from shaft-mounted pulser disc or wrap, and output voltage pulse frequency proportional to shaft rotation speed. All models operate down to (and including) zero speed and are compatible with PLC inputs, tachometers, and range of frequency meters. Pulser disc, mounting bracket, and 2 stainless steel hex jam nuts are standard.

Osensa Innovations Corp.    Coquitlam V3J0A3  Canada
Nov 10, 2011 Featuring DIN rail mount design, Model FTX-301 supports 3 fiber optic temperature inputs and includes 3 optically isolated 4-20 mA analog outputs, while Model FTX-302 is same device only without analog outputs. Both include industrial RS-485 serial bus for modbus communication to multiple daisy-chained devices. Providing real-time temperature data to 200°C, each device is configured and monitored via OSENSAView FTX software and direct USB connection to PC/laptop.

Steinbichler Optotechnik GmbH    Neubeuern   Germany
Nov 09, 2011 Offering complete solution for precision 3D digitalization, COMET 5 Eco can be positioned on various handling systems and includes INSPECTplus inspection software, column stand, and corresponding computer hardware. Modular construction enables system to adapted to various measuring field sizes, enabling individual configuration for respective measuring tasks. COMETplus software, projection technology, and one-camera technologies optimize speed as well as data quality.

Servomex Group Ltd    Crowborough East Su TN6 3DU  United Kingdom
Nov 09, 2011 Able to detect wide range of gases, SERVOTOUGH LaserCompact 2900 delivers true continuous in-situ monitoring and is optimized for measurement across pipes and along short cells. Unit utilizes Tunable Diode Laser Spectroscopy technology to deliver response time of less than 2 seconds with minimal interference from background gases. Certified to ATEX and IECEx standards, LaserCompact is suitable for gas measurements in hot, dirty, or dangerous environments.

Lamar Lighting Co., Inc.    East Farmingdale, NY 11735
Nov 09, 2011 Controlled by 2 external infrared motion sensors, Model DS-LED operates at 20% light/power in standby mode and illuminates to full light output upon occupancy. Sensors are field adjustable for optimum coverage, range, and time delay using optional IR remote control. Factory pre-set to 5% light level with 5 minute time delay and 360°/26 ft diameter coverage, luminaire is suitable for stairwells, utility rooms, and other areas where maximum light levels are not required on constant basis.

Libelium Comunicaciones Distribuidas S.L.    Zaragoza   Spain
Nov 08, 2011 Using Expansion Radio Board for Waspmote, Vehicle Traffic Monitoring Platform senses flow of Bluetooth devices in given street, roadway, or passageway while differentiating hands-free car kits from pedestrian phones. Sensor data is then transferred by multi-hop ZigBee radio, via internet gateway, to server. Traffic measurements can be analyzed to address congestion of either vehicle or pedestrian traffic. With 6 power levels, sensor operators can set inquiry zone from 10-50 m.

Xenon Inc.    Irvine, CA 92612
Nov 08, 2011 Using cellular network to connect remote sites with central control and monitoring stations, Model T925 enables users to remotely monitor and control automation systems. Up to 250 controllers can simultaneously communicate through cellular network with VPN router installed at central control and monitoring station. Accepting up to 7 Ethernet inputs as well as 4 digital inputs, 4 analog inputs, and 2 temperature inputs, Model T925 uses 4 digital relay outputs to control remote systems.

Montalvo Corporation    Gorham, ME 04038
Nov 08, 2011 Offering either single or multiple tension zone monitoring, Model i4-HD can be supplied with analog or LCD digital meter displays. Unit provides excitation voltage as well as zero and calibration circuitry. Output can interface with PLC, PC, or DC/AC or servo drives. Compatible with most semiconductor strain gauge and foil gauge load cells, Model i4-HD delivers accurate and repeatable web tension.

Endress + Hauser Inc.    Greenwood, IN 46143
Nov 08, 2011 Integrating with Rockwell Automation PlantPAx process automation system, Promag 53 measures electrically conductive liquids with minimum conductivity of 5 µS/cm and flow rates to 1,250 gpm. Integrated Web server allows authorized users to remotely view flow data, conduct diagnostics, configure flowmeter, or perform process optimization. By using EtherNet/IP, up to 10 variables can be configured, including volume flow, calculated mass flow, and totalized flow for remote access.

Baumer Ltd.    Southington, CT 06489 1534
Nov 07, 2011 Able to withstand aggressive cleaning processes of food and beverage applications, GE404 features Viton seals and ShaftLock bearing. Latter minimizes downtime by enduring vibration and shaft loads during processing/cleaning. Leak-proof and IP67-compliant, encoders resist harsh washdowns with aggressive cleaning agents over entire service life. Optical sensing principle allows 14-bit, single-turn and 12-bit, multi-turn resolutions for precision positioning at velocities up to 10,000 rpm.

Macro Sensors    Pennsauken, NJ 08110 1334
Nov 07, 2011 Constructed of stainless steel and rated to 212°F, intrinsically safe HLR series is UL-/ULC-listed for hazardous locations Class I, Division 1, Groups A/B/C/D and Class I, Zone 2. Contactless position measurement accommodates critical applications in hostile environments of gas/steam turbine plants, chemical process plants, and paper mills. Offering measurement ranges from ±1 to ±10 in. FS, series delivers repeatability better than 0.01% FS typ and non-linearity of less than 0.25% FRO.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Nov 07, 2011 Housed in aluminum, Series TTW combines 3 products into single package. TBU Series head-mounted temperature transmitter is factory mounted into A-709 weatherproof enclosure, and Pt100 RTD version of TE Series is wired to transmitter, giving insertion lengths up to 18 in. Each transmitter is factory programmed and calibrated to output 4-20 mA signal proportional to 32-212°F temperature range.

Graywolf Sensing Solutions    Shelton, CT 06484
Nov 04, 2011 Available for AdvancedSense(TM) and WolfPack(TM) instruments, Differential Air Pressure Sensor Board incorporates 1.000 in. H2O sensor and 40.0 in. H2O sensor with auto-ranging from one sensor to the other, dependent on detected pressures. For long-term monitoring, board provides auto-zeroing of both sensors every 2 minutes. Board is suitable for investigating pollutant pathways, testing filter performance, and monitoring positive vs. negative pressure over time for adjacent zones.

Micro-Epsilon UK Ltd    Cheshire   United Kingdom
Nov 03, 2011 Designed to inspect LEDs for function, contrast, and luminosity, colorCONTROL MFA-5 can verify up to 5 LEDs simultaneously. Light from target object is transmitted to inspection system via 2 mm diameter, plastic optical fiber and is evaluated dynamically using color sensor. Color value, which is determined within milliseconds, is output as RGB, HIS, or CIE values and transmitted via USB or RS232 interface at 9,600-115,200 baud to higher level inspection system.

Honeywell Sensing and Control    Golden Valley, MN 55422
Nov 03, 2011 Delivering ±0.1% BFSL (Best Fit Straight Line) accuracy, Model 425 enables operators to monitor downhole drilling conditions and detect pressure spikes, which promotes accelerated adjustments and control. Model 427, with free flow sensing port @ ±0.2% BFSL, has wider aperture design with rounded edges allowing seamless flow of more viscous media through critical sensing area. This reduces clogging and buildup while providing consistent and accurate pressure measurements.

STMicroelectronics    Lexington, MA 02421
Nov 02, 2011 Housed in 3 x 4 x 1 mm package, Model MP34DT01 combines top-port sound-inlet position with SNR of 63 dB and flat frequency response in full audio band of 20-20,000 Hz. In multiple-microphone applications, device enables active noise and echo cancelling as well as beam-forming, which isolates sound and its location. Applications include speech-recognition systems for voice-controlled software and electronic-assistant applications, as well as sound level meters that require high dynamic range.

AutomationDirect.com    Cumming, GA 30040-9905
Nov 01, 2011 Using Bourdon tube sensing elements to measure vacuum to 6,000 psi, ProSense(TM) Pressure Gauges come in steel or stainless steel, in dry or liquid filled versions to dampen vibration and pulsations. Brass wetted parts are suited for air, oil, or water, while stainless steel wetted parts are offered for corrosive applications. Constructed of 304 SS with bi-metal sensing elements, ProSense(TM) Thermometers are available in 3 in. dials with center back mounts and 5 in. dials with adjustable angle mounts.

Kaman Aerospace, Measuring & Memory Systems    Middletown, CT 06457
Oct 28, 2011 Featuring 19 in. modular rack format, Model KDM-8206 is based on 3U-by-7T Eurocard module that makes multi-channel displacement, run-out, and position measurements. Module contains inductive bridge and signal conditioning circuits that produce linear voltage proportional to physical displacement of target relative to sensor. User can add channels by installing modular PC backplane boards into empty slots. With coarse and fine calibration controls, system achieves resolution to 10 µin. or better.