HBM, Inc.    Marlborough, MA 01752 3014
Mar 11, 2009 At 1.2 x 2 mm, Y series micro-strain gauges detect mechanical stresses that occur during production of complex PCBs. They attach directly to board to monitor levels, which are 850 µm/m for unpopulated PCBs and around 450 µm/m for populated boards. Measurements can be obtained during production processes including depanelization, plug assembly, in-circuit testing, and installation as well as in solder bath. Units are available in linear and rosette form.

Extech Instruments Corp.    Nashua, NH 03063
Mar 11, 2009 Utilizing flat surface electrode, ExStik® CL200 monitors Residual Chloramines and Total Chlorine including free chlorine, hypochlorite, and chlorine bound to nitrogenous compounds. Unit provides direct reading of Total Chlorine from 0.01-10.00 ppm, eliminating need to transport sample back to lab for analysis. Meter is suited for measuring chlorine in drinking water, cooling towers, wastewater treatment systems, industrial cooling water, pools, spas, and food processing.

Clark Solutions    Hudson, MA 01749
Mar 11, 2009 Utilizing IR technology to monitor and control fluids, including corrosive or aggressive liquids, PFA Teflon® Turbine Flow Sensors are designed for full-scale flow ranges of 2.0, 20, and 40 Lpm with accuracy of 1% of reading and repeatability of better than 0.15%. Featuring lightweight rotor that generates IR reflected digital output signal, sensors can be supplied with internal preset flow switch set via software interface, and internal programmable batch function for dispensing and dosing.

Axiom Analytical, Inc.    Irvine, CA 92714
Mar 10, 2009 Allowing process monitoring in full-scale batch reaction vessels, FDR-1800 Series Near-IR Diffuse Reflectance Probes utilize window sealing technique involving sapphire to metal welded pressure seal. Chemical resistance is ensured because only materials in contact with process are sapphire, high nickel alloys, and thin flash of either gold or PTFE. Device provides NIR diffuse reflectance data for nearly opaque samples and fluids with total reflectance of below 2%.

CleanAIR Systems, Inc.    Santa Fe, NM 87502
Mar 09, 2009 E-POD(TM) combines non-toxic, zeolite-based selective catalytic reduction (SCR) catalyst, diesel particulate filters or diesel oxidation converters, and reductant mixing system within one, fully insulated, stainless steel, critical-grade silencer package. Installed above generator and becoming part of trailer's roof, system with DPFs enables Tier 4 final compliance for diesel stationary engines and NSPS compliance for lean-burn natural gas engines by reducing NOx, PM, HC, and CO.

MAZeT GmbH    07745 Jena   Germany
Mar 09, 2009 Featuring integrated signal processing and 4 programmable amplifier channels, low-profile True Color Sensor TIAM3 is suited for implementing RGB-LED backlighting control in flat screens. Spectral characteristics of filter curves are optimally tuned for eye-accurate LED color control requirements. Applications include displays for photograph and image editing, visual medical diagnostics, or high-end multimedia.

Solar Metrology    Holbrook, NY 11714
Mar 06, 2009 Featuring 600 x 1,200 mm lateral X/Y range of measurement, SMX-FPV is designed for near-line film composition and thickness control of CIGS and CdTe film stacks. It also provides process control of active, contact, and TCO layers. Detailed analysis of full photovoltaic panels is possible, including copper and gallium ratio determination as well as panel gradient analysis. Areas of use include research and process development, in-process monitoring, and post-process QC.

Lowrance    Tulsa, OK 74128
Mar 06, 2009 HDS (High Definition System) multifunction displays are available with side-viewing sonar technology option that offers photo-like presentation for underwater bottom and structure viewing. In addition to providing legacy total-sonar performance, add-on module works in tandem with existing HD 2D sonar displays. It is networked using Ethernet connections, allowing sonar to supplement all HDS displays mounted on boat. Uses include underwater search/recovery and marine ecology sciences.

Balmac Inc.    Plain City, OH 43064
Mar 05, 2009 Providing 4-20 mA output signal that is proportional to vibration amplitude, heavy-duty vibration transmitter Model 191 is 2-wire, loop powered sensor used to monitor oil and gas production pumps, compressors, fans, and motors. Powered by 12-24 Vdc source, output wire can be connected to any existing PLC, SCADA, or DCS system. Product is enclosed in rugged, NEMA 4 weatherproof case and is listed by UL-Underwriters Laboratories for use in hazardous locations (Listing ZTSZ).

Koehler Instrument Co., Inc.    Bohemia, NY 11716
Mar 05, 2009 Heated Oil Test Centrifuge incorporates LCD touchscreen control panel that can be used to govern centrifuge rotation speed, turn heat on/off, set duration of test, and choose type of rotor assembly and corresponding glassware to be used during test. Manufactured to meet Class 1, Division 2 explosion resistant rating, system conforms to range of Standard Test Methods and features top-opening lid that provides access to rotor and tube holders and features 18½ in. dia viewing window.

Baumer Ltd.    Southington, CT 06489 1534
Mar 04, 2009 Reliant upon LED or laser light sources, Series 14 sensors detect presence, placement/orientation, or size of objects. They are available with 3 methods of operation - thru-beam, retro-reflective, diffuse - and have integrated channel that lets cable lay flush against sensor housing for limited-space installations. Along with transparent rear housing for viewing operation/reception LEDs, available features include molded M12 (S14) connector and metal 4-pin M8 connector (S35A).

Dynapar    Gurnee, IL 60031
Mar 03, 2009 Using magnetic coupling technology, NorthStar HDN and HDP Series eliminate encoder shafts, bearings, and seals. Target magnet, in form of bolt or collar, can be affixed to rotating shaft or equipment that requires position or speed sensing. Electronics are completely sealed and encapsulated in clear potting compound, which allows visibility of status LEDs that monitor signal output. Available in incremental or absolute output format, encoders are suited for very dirty environments.

E Instruments International LLC    Langhorne, PA 19047
Mar 03, 2009 With accuracy of ±1% rdg. + 0.2 mbar and 128 x 128 pixel backlit LCD display, MP100 manometer suits application in HVAC industry. It includes leak test procedures and air velocity with density compensation. Measuring 5 x 2.5 x 1.25 in., product also comes with pressure tubes, battery, and 11 pressure units including Pa, psi, mbar, bar, mm H₂O, and in. H₂O.

KWJ Engineering Inc.    Newark, CA 94560
Mar 03, 2009 Measuring 2.66 x 1.40 x 0.61 in., Pocket CO Model 300 carbon monoxide detector, alarm, and dosimeter weighs less than 1 oz and has 0-500 ppm range. It warns of dangerous low and high CO levels, with first alarm at 50 ppm, second at 125 ppm, and third at 400 ppm. There is also 8 hr TWA warning alarm at 25 ppm. With response time of less than 90 sec, monitor produces readings on digital LCD with 1 ppm resolution. It can also monitor cumulative CO exposure over 12 hr period if necessary.

Azima DLI    Woburn, MA 01801
Mar 03, 2009 Using DCA-60(TM), plant technicians can collect vibration data and diagnose machine faults on-site or transmit data via Internet to Azima DLI expert analysts as part of WATCHMAN Analysis(TM) program. Unit is capable of simultaneous 4-channel vibration data collection, offers wireless connectivity and multimedia support, and provides 80 GB for data storage. Also included, onboard ALERT(TM) machine vibration analysis software provides various diagnostic tools.

Ashcroft Inc.    Stratford, CT 06614
Mar 02, 2009 Available in ranges from vacuum through 0/20,000 psi, Ashcroft® T2 features static accuracy of ±0.25% FS at 21°C and digital temperature compensation that ensures Total Error Band better than ±1% between -20 to +85°C. Unit can be configured with variety of process connections, output signals, and electrical termination options. Able to withstand overpressure, shock, vibration, and extreme pressure cycling, transducer is suited for industrial applications.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Mar 02, 2009 Intended for applications that require filter status check, Series PFG determines pressure drop on either side of filter through ¼ in. female NPT pressure connections, and relates value to 1 of 3 zones. Green indicates clean, while yellow recommends change, and red means filter is dirty. In addition to filter applications, Series PFG is suited for line loss, valve drop, and other differential pressure applications where indicator is needed.

GAO Tek Inc.    Toronto M1B2K4  Canada
Mar 02, 2009 With ability to verify capability of cable to transmit xDSL signals, GAO 5221 xDSL tests Vac/Vdc of copper twisted pair cable, resistance, ac/dc current, capacitance, frequency response, noise, DMT, and load coils. Measuring 260 x 190 x 70 mm, and weighing approx. 1.9 kg, unit has impedances of 75, 100, 120, 135, and 150 W and automatic. Other features include manual or auto TDR test, 640 x 480 pixels LCD graphic display for test results, and ac/dc or internal battery power supply.

STMicroelectronics    Lexington, MA 02421
Feb 27, 2009 Featuring ¼ in. optical format, 3.15-megapixel Models VD6853 and VD6803 provide integrated Extended-Depth-of-Field capabilities ranging from 15 cm to infinity. Units include image enhancement filters and 4-channel anti-vignette to balance uneven illumination. Model VD6803 is available with 10-bit parallel legacy interface, while Model VD6853 features CCP2 interface. Enabling camera modules as small as 6.5 x 6.5 mm, sensors are suitable for mobile phones, laptops, and machine vision applications.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Feb 26, 2009 Featuring 6 in. dial face as well as wetted parts of 316SS and Fluoroelastomer (FKM), Series CLG Cryogenic Level Gage is available with aluminum, brass, or stainless steel body and suited for liquid level, line loss, and valve drop applications. Flexible elastomer diaphragm design provides accurate (±3-2-3%), direct-acting, low-range differential pressure indicator. Construction is also resistant to effects of expansion/contraction due to temperature shocks.