RJG, Inc.    Traverse City, MI 49686-4713
Jan 03, 2012 With touchscreen interface, eDART System enables user to minimize inherent process variation that is common in molding facilities and allows user to produce repeatable parts. System features digital smart sensors, graphical analysis, real-time operation, and single unit or networking ability. By controlling process and implementing part containment, users can guarantee that no bad parts ship to customers.

Control Co.    Houston, TX 77258 8307
Dec 30, 2011 Supplied in chemical-resistant ABS case, Traceable® RTD -100.0 Platinum Freezer Thermometer monitors temperatures in freezers, water baths, heating blocks, incubators, and refrigerators. Unit features temperature range of -99.9 to 199.9°C with 0.1° resolution and ±2°C accuracy. Measuring 1/8 x 5 in., 100 W RTD platinum probe operates with liquids, air/gas, and frozen material. Adjustable probe holder, Velcro®, and magnetic strips are provided for mounting.

Numerex Corp.    Atlanta, GA 30339
Dec 27, 2011 Featuring satellite-based design, Remote Asset Monitoring Solution enables VARs to provide secure, configurable asset visibility to customers seeking to monitor liquid tanks and door open/close events. FLEX SNSR interface is connected to tank level or door sensor and wirelessly transmits data to Satellite FLEX tracking device, which can link up to 4 FLEX SNSRs. Satellite FLEX sends data to web-based FASTrack application, which can generate visual and audio alerts as well as email notifications.

Hewlett Packard    Houston, TX 77269-2000
Dec 21, 2011 Suited for small, medium, and enterprise-sized businesses, HP UPS Network Module can support single UPS configuration or provide additional power protection with support for dual, redundant UPS configuration, facilitating no-single-point-of-failure environment. Module can be set up to send email notifications or alert traps to any SNMP management program. To facilitate day-to-day maintenance tasks and power analysis, embedded management software provides system logs.

STMicroelectronics    Lexington, MA 02421
Dec 21, 2011 With 6 degrees of freedom, iNEMO inertial MEMS module integrates 3-axis sensing of linear and angular motion in 3 x 5.5 x 1 mm package. It delivers motion-sensing capabilities for space-constrained consumer electronic (CE) applications. Design and real-time sensor data fusion capabilities enhance user experience and motion-sensing realism, and data-fusion software employs prediction and filtering algorithms to automatically correct measurement distortions and inaccuracies.

Montalvo Corporation    Gorham, ME 04038
Dec 21, 2011 Made of stainless steel, U-Series is water-, dust-, corrosion-, and chemical-resistant. Load cells are used with pillow block mounted bearings and live shaft to offer precise tension roll. Providing 1,550X sensitivity, units are drilled and tapped to customer specifications, and include built-in overload stops that protect personnel, equipment, and product.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Dec 16, 2011 Miniature photoelectric sensors comprizing S3Z series include through beam, polarized retroreflex, 2 m polarized for transparent, 70 cm diffuse proximity, narrow beam, and background suppression modules. Available in NPN and PNP out with dark or light operating mode and with cable or M8 connection, products come in housing that is completely overprinted with mechanical protection of IP67. Areas of use include automotive, packaging, and beverage bottling applications.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Dec 16, 2011 Supplied with 304 SS housings and 316 SS wetted parts for chemical compatibility, 1.5 in. Series SG3 and 2.5 in. Series SGZ feature dual psi and bar (x100 kPa) scales with respective ±2.5% and ±1.5% FS accuracy. Series SG3 covers ranges from full vacuum to 300 psi and can withstand ambient temperatures to 140°F. Bottom or back 1/8" NPT connection options are available. Equipped with breather plug, Series SGZ also covers diverse ranges and offers bottom or back connection configurations.

MultiDimension Technology    San Jose, CA 95138
Dec 16, 2011 Based on Tunneling Magnetoresistance technology, Models MMLD47F, MMLP57F, and MMLP57H feature ultra-low hysteresis below 0.1% of full-scale range, magnetic field sensitivity from 3-6 mV/V/Oe, and typical current consumption between 5-12.5 µA with 1 V voltage supply. Units are available in 6 x 5 x 1.7 mm SOP8 and 3 x 3 x 0.75 mm DFN8 packages, suited for industrial and consumer applications under diverse operating conditions, including magnetic field, current, and position sensing.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Dec 15, 2011 Subminiature ML4.2 Series includes models with response times as fast as 250 µsec, multibeam redundant detection, independent outputs, and zero deadband sensing. Dual sensor redundant detection can detect transparent or glossy objects wrapped in foil or plastic. Precise sensing models include one sensor with visible red emitter that senses black and white color extremes at distances up to 20 and 21 mm from sensor, respectively. Retroreflective sensing and thru-beam models are also available.

API Technologies Corp.    South Plainfield, NJ 07080
Dec 15, 2011 Measuring .875 in. dia with .750 in. max length, H009 Series converts relative changes in magnetic field into electrical signal to provide position change information. Units with 4-20 mA output join existing Analog, PWR, and Serial output options. Providing 12-bit resolution with rotational life of over 100 million revolutions, sensors feature absolute linearity of ±0.1% at ambient and ±0.3% at -40 to +125°C. Special shaft, flange mounting, and gear mounting frame configurations are available.

Palmer Wahl    Asheville, NC 28804
Dec 14, 2011 Featuring 2.5 in. dial face, EDG Gauges display pressures on LCD with ±1% FS accuracy and settable resolutions of 0.1, 0.2, 0.5, and 1 whole unit. Units operate on 9 V battery for approximately 1,500 hours, and include auto-off timer that saves battery life, allowing gauges to be always on, or to auto shut off in increments from 30-180 sec. Equipped with protective rubber boot and ¼ in. bottom NPT connection, gauges are available with 316 SS internals for corrosive liquid applications.

Endress + Hauser Inc.    Greenwood, IN 46143
Dec 12, 2011 Available in 3 sizes from 3/8 to 1 in., CNGmass Flowmeter measures mass flow up to 330 lb/min at fluid temperatures up to 257°F and pressures to 5,080 psi. Instrument measures direct mass or corrected volume flow of compressed natural gas with 0.5% accuracy to meet custody standards. Because flowmeter features balanced 2-tube design, it is insensitive to pipeline vibrations. Unit carries approvals for use in hazardous areas from UL, ATEX, FM, cCSAus, and NEPSI.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Dec 12, 2011 Offered with sensitivity between 1 and 2 pC/g, model 3316C features charge mode element mounted in hermetically sealed, miniature Inconel® housing with 0.36 in. profile. Silver window on top cover of housing provides oxygen access to crystal at high temperatures while maintaining unit's hermetic sealing. Utilizing planar shear technology, product weighs 5 g and has 10,000 Hz upper frequency response, 5-40 tapped hole, and 10-32 radial connector.

SAW instruments GmbH    Bonn D-53177  Germany
Dec 09, 2011 Able to expand capabilities for studying real-time kinetics on surfaces of live mammalian cells, sam®X sensor uses surface acoustic wave technology and does not require any fluorescent labeling. Each of 8 channels can be utilized independently (8 x 1) or via sequential combinations of 4 x 2, 2 x 4, or 1 x 8 channels to optimize workflow; discrete or common reagents can be delivered to particular sensor chip positions. Analysis takes place in minutes.

Columbia Research Labs., Inc.    Woodlyn, PA 19094
Dec 09, 2011 Housed in 7.5 x 4 x 2 in. plastic case with detachable probe, Model VM-300 operates from piezeoelectric accelerometer and incorporates charge amplifier input stage. Operation is controlled by internal microcontroller, acting under direction of 7-key membrane keypad. Powered via internal battery or external AC adapter, handheld meter includes acceleration, velocity, and displacement measurement modes. Low-voltage lockout circuit prevents meter from making erroneous readings due to low battery.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Dec 09, 2011 Type 4550A KiTorq has bearing and slip-ring free design that consists of Type 455x KiTorq rotary torque measuring unit and Type 454x KiTorq stator torque evaluation unit. Both rotors and stators within system with same speed option may be used in any combination with one another. Stator automatically detects change in rotor and likewise sets required measurement parameters. Rotors capture torque using strain gauges, with generated signal amplified and processed at ~35 kSample.

STMicroelectronics    Lexington, MA 02421
Dec 09, 2011 Housed in 2 x 2 mm packages, Models LIS2DH and LIS2DM provide high-resolution output across full scale range of ±2, ±4, ±8, or ±16 g. MEMS sensors include 4D/6D orientation detection and 2 programmable interrupt signals that enable immediate notification of motion detection, free fall, and other conditions. Addressing power constraints in battery-operated portable devices, accelerometers include power-down and sleep modes as well as FIFO memory block for smart power management.

Ophir-Spiricon Inc.    Logan, UT 84321
Dec 08, 2011 In one sensor, BeamTrack 3A-QUAD combines laser power, energy, and position measurement functionality. Measurement ranges include power from 100 µW to 3 W, energy from 20 µJ to 2 J, and spectral range from 190 nm to 20 µm. With 9.5 mm aperture, sensor tracks beam position down to 0.1 mm to meet needs of high-sensitivity applications. Beam position measurement function also allows tracking of beam wander. Unit operates with Nova II and Vega smart displays and Juno PC interface.

Sierra Monitor Corp.    Milpitas, CA 95035 6825
Dec 08, 2011 By ensuring detection prior to entry, model 4501-03 protects against instances caused by other gases leaking into enclosed space and dropping oxygen levels below critical 19.5% level. Maintenance is minimized by 180 day calibration interval, and 4-20 mA, 2-wire loop-powered design facilitates installation. With integral, scrolling, menu-driven LCD, operator interface aids access to gas status, calibration instructions, adjustment of ranges and outputs, and diagnostic information.