Freescale Semiconductor    AUSTIN, TX 78735-8598
Dec 04, 2009 Providing 2 portable demo boards, one sensor transceiver board, and one USB receiver board, RD3965MMA7660FC ZSTAR3 reference design facilitates demonstration and evaluation of accelerometer-based applications with low-power wireless connectivity. Included MMA7660FC triple-axis accelerometer enhances mobile phone and small appliance UIs with features such as tilt orientation and gesture detection. Wireless communication is enabled by 16-channel MC13213 ZigBee-ready 2.4 GHz transceiver.

Applied Measurements Limited    Aldermaston, Berkshire RG7 8PN  United Kingdom
Dec 03, 2009 Manufactured from precipitation-hardened stainless steel, DBEP series can be designed/customized to suit existing mechanical arrangements. Amplifiers are available within load pin head to increase output signal to 0-10 Vdc, 0-5 Vdc, or 4-20 mA when low-level signal needs to overcome lengthy cable runs to instrumentation. Sealed to IP67 as standard or IP68 optionally, pins offer standard capacities from 2.5-50 tons, although load capacities are often supplied from 200 kg to 1,500 tons.

CIP Technologies    Ipswich   United Kingdom
Dec 03, 2009 With insertion loss of only 3.6 dB, combined modulation and photodetection transducer 60G-R-EAM-1550 provides digital optical modulation at 50 GBps, RF modulation over 60 GHz bandwidth, and photodetection with 1.0 A/W responsivity and 43 GHz bandwidth. It operates across 1,550 Nm C-band with low chirp parameter and is designed for use with laser diode source. It is available in custom variants, standard package with RF connectors is suited for use with external RF components/drivers.

Young Engineering Mfg., Inc.    San Dimas, CA 91773
Dec 03, 2009 Acoustic Volume Indicator Technology is non-intrusive means to determine liquid or gas volume in pressurized or non-pressurized metal tanks. Components include transducer, impactor, and waveform analyzer software that calculates peak frequency from input signal. Able to work in range of temperatures, pressures, installation connections, and fluid specific gravities, 3 versions are available: AVI Automated which includes alarms and remote signals, AVI Laptop, and AVI Handheld.

Omron Scientific Technologies Inc.    Fremont, CA 94555
Dec 02, 2009 Designed for locking large and heavy doors, IP67 rated D4JL guard locking safety door switches feature rear release buttons to allow workers to unlock switch from inside protected area and exit hazardous areas. Two safety circuits and 2 monitor contacts provide array of monitoring patterns, including monitoring open/closed status of door and status of lock. Standard gold-clad contacts enable use with microloads and ordinary loads. Trapped key models are also available.

City Technology Ltd    Portsmouth PO6 1SZ  United Kingdom
Dec 02, 2009 Developed specifically for medical applications, NO sensor allows manufacturers of breath monitoring equipment to develop smaller instruments. Design does not require sample of exhaled breath to be adjusted to particular temperature or pressure to achieve reliable reading, and only 10 sec exposure is required to achieve reading with resolution down to 10 ppb. Operating over 10 to 30°C range, product is rated for 2,000+ exposures and operates on catalytic, non-consumable principle.

Bosch Sensortec    Reutlinge 72770  Germany
Dec 02, 2009 Supplied in 3 x 3 x 0.9 mm package, BMA120 recognizes spatial position and positional changes of mobile devices and classifies them within random movement, rotational movement, tapping, and fast/slow categories. Programmable interrupt controller directs mobile phone functions according to targeted movements of device. Supporting 4 programmable measuring ranges from ±2 to ±16 g, sensor provides SPI and I²C interfaces and interrupt output as well as low-power and programmable sleep modes.

Micro-Epsilon UK Ltd    Cheshire   United Kingdom
Dec 01, 2009 Supplied in compact housing with integrated controller, scanCONTROL 2700/2710 series are typically used to measure angles, steps, and positions in automation solutions where space is restricted. Same is also possible for profiles such as adhesive beading, weld seams, grooves, and gaps. While scanCONTROL 2700 acts as pure data supplier and provides measured points, scanCONTROL 2710 calculates information directly in sensor.

Sensortechnics, Inc.    Walpole, MA 02081
Dec 01, 2009 Utilizing non-invasive capacitive sensor technology, CLW series detects point levels of liquids and granular or pulverized materials without contacting media. User can adjust high and low switch point with hysteresis of less than 1 in. Product mounts to outside of container or vessel and can measure through almost any nonmetallic wall material. Its reference electrode compensates for all changes in ambient environmental conditions such as temperature and humidity.

Seiko Instruments GmbH    Neu-Isenburg   Germany
Dec 01, 2009 Operating from 4-5.5 V supply, N- and S-pole sensing Hall-sensor series S-5721A/22A/23A are laid out in CMOS with Push-Pull or N-Ch-Open-Drain Output. Detection frequency of 7.6 kHz corresponds to 0.132 ms detection period and current consumption of 0.95 mA in pulsed S-5722A, while continuous-duty S-5723A exhibits 3 mT/-3 mT typ sensitivitya and is packaged in SOT-23-3 that can dissipate 430 mW. Requiring 0.08 mA, S-5721A has 0.63 KHz detection frequency and 1.58 ms detection period.

Parker Hannifin Corp., Hose Products Division    Wickliffe, OH 44092 1797
Nov 30, 2009 Comprised of hose collar and hose assembly, Hose Whip Restraint limits whip/travel of pressurized hydraulic hose after it breaks free from its fitting to enhance safety for nearby operators/equipment. This helps avoid financial and legal ramifications for company in addition to minimizing downtime and lost revenue. Available with cable assemblies for flange-type connections and port adapters, restraint employs steel cord to keep hose fastened to fitting after breakage occurs.

Clark Solutions    Hudson, MA 01749
Nov 30, 2009 Designed for equipment manufacturers for system flow monitoring and control, DN Series operates on Karman's vortex trail principle, handles flow ranges from 0.24-39.6 gpm, and is accurate to 1% FS of measured value. Piezoelectric sensors embedded in ETFE vane located downstream of bluff detect generated vortices, and measured frequency represents flow velocity. This results in temperature-insensitive measurement of flow with minimal pressure loss.

STMicroelectronics    Lexington, MA 02421
Nov 30, 2009 Based on ST23 microcontrollers and secure operating system, AuKey turnkey solution helps brand owners authenticate products such as computer accessories, add-in cards, printer cartridges, network infrastructure products, and metering devices. AuKey supports advanced security crypto algorithms including AES shared-key system and Elliptic Curve Cryptography. Microcontroller and OS, together, also secure chip's data-read and data-write mechanisms.

CUI, Inc.    Tualatin, OR 97062
Nov 30, 2009 Offering 2-bit quadrature resolution with square wave output signal, C14 panel mount optical encoder suits application in industrial equipment, portable communication equipment, and medical equipment. Series has 16 or 32 angle of throw position along with 3 shaft options that include 3.175 mm with slotted end, 6 mm dia round, and 6.35 mm with D-cut. Termination options included are solder holes, 130 mm cable with connector, and pcb or panel mount.

CUI, Inc.    Tualatin, OR 97062
Nov 30, 2009 Offering 2-bit quadrature resolution with square wave output signal, C14 panel mount optical encoder suits application in industrial equipment, portable communication equipment, and medical equipment. Series has 16 or 32 angle of throw position along with 3 shaft options that include 3.175 mm with slotted end, 6 mm dia round, and 6.35 mm with D-cut. Termination options included are solder holes, 130 mm cable with connector, and pcb or panel mount.

Balluff, Inc.    Florence, KY 41042-0937
Nov 30, 2009 Made from corrosion-free stainless steel with rounded edges and minimal crevices, 3-A and EHEDG sanitary standards certified Micropulse SF fill level sensor uses field-tested magnetostrictive technology to provide high-precision fill level measurement. Continuously-variable analog output signals allow for connection to control systems. Units are chemically neutral for all liquids, and can withstand process temperatures up to 130°C.

Sherborne Sensors Limited    Hampshire RG21 6YH  United Kingdom
Nov 30, 2009 Model T710 measures inclination proportional to sine of angle in one axis, while T720 measures inclination in dual axes at right angles. Available in ranges from ±30 to ±90°, compact DC-operated inclinometers feature MEMS sensor incorporating air damping that is independent of temperature, allowing unit to perform over wide temperature range. They are resistant to shock and operate from unregulated DC power source, and offer self-test feature on both axes.

Southco    Concordville, PA 19331 0116
Nov 27, 2009 Self-contained EA-P1 facilitates transition from mechanical to electronic access while increasing security. LED and audible beeper provide feedback during software-free programming, and programmable output timing supports multiple access arrangements. Able to accommodate multiple users via support for up to 5 unique PIN codes and 9,999 proximity cards, access management solution also includes relay output that integrates directly with electronic locks.

Sensocon, Inc.    Lakeland, FL 33801
Nov 25, 2009 Designed to measure positive, negative, and differential pressure, S9000 Differential Pressure BoxGauge(TM) mounts to any wall or vertical flat surface. Box shape also allows gauge to sit on any flat horizontal surface. Featuring 3 in. face, gauge provides 5% overall accuracy and is supplied with pressure connections at top and back for 3/16 in. tubing. Applications include monitoring filter status, duct static pressure, dust collectors, fan and blower pressure, or other HVAC equipment.

Avago Technologies    San Jose, CA 95131
Nov 25, 2009 Suited for industrial control applications, ACPL-K370/K376 detect AC/DC sources and convert voltage to logic interface across optical coupling barrier to provide safe isolation in electronically noisy environments. Threshold sensing input buffer ICs permit control of threshold levels over wide range of input voltages up to 1,140 Vpeak, with single external resistor. Housed in SO-8 package, detectors operate from -40 to +105°C and meet 8 mm clearance and creepage requirements.