OmniVision Technologies, Inc.    Sunnyvale, CA 94089
Jan 18, 2012 OV9713's 12-bit RGB RAW output capability provides high dynamic range (HDR), while embedded sequential line- or frame-based HDR features address high-contrast scenes found indoors. Sensor is 3D ready and designed for interactive gaming and real-time communication for telepresence applications. OV9713 captures 720p video at 60 fps and is built on low-light sensitive OmniPixel3-HS(TM) pixel. It comes with 2-lane MIPI interface and fits into 8 mm x 6 mm x 4.5 mm module size.

OmniVision Technologies, Inc.    Sunnyvale, CA 94089
Jan 18, 2012 Using OmniBSI+ pixel architecture and second-generation backside illumination (BSI(TM)) technology, 1/3.2 in. OV8825 CameraChip(TM) sensor suits smartphone/tablet manufacturers upgrading camera designs. Sensor operates at 24 fps in full resolution and in full HD video mode at 30 or 60 fps and can capture images and video in bright and low-light conditions. Additional features include 4-lane MIPI interface, scaler with electronic image stabilization, and 2 x 2 binning functionality.

Radiopaque Solutions, Inc.    Bonita spring,, FL 34135
Jan 18, 2012 Available for all security screening applications, RadMark(TM) Airport Security Bin Identification System uses uniquely identifiable, x-ray visible tag placed under rim of each bin. Identification code on radiopaque tag matches bin identification label, and tag itself can also perform both functions. When scanner operator selects bin to be checked, it is visually identified on x-ray scanner screen by ID number. Bin can then be segregated for further screening by visually matching bin label.

Newport Electronics, Inc.    Santa Ana, CA 92704
Jan 17, 2012 Available for analog voltage and current, temperature from digital sensors and dual thermocouples, humidity, and barometric pressure, wSeries has weatherproof, polycarbonate NEMA4/IP65 housing and battery or ac power options. Users can view charts and graphs as well as monitor and record readings over Ethernet network or Internet from any computer, tablet, or smart phone via Web browser. Also, alarms can be set and to notify individuals/groups via email or text messages.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Jan 17, 2012 Single-axis Type 8640A PiezoBeam® IEPE Accelerometer with optional TEDS offers ±5, ±10, and ±50 g ranges with sensitivities from 1,000-100 mV/g. Ceramic cantilever beam sensing element, enclosed within hermetically sealed titanium housing, is thermally compensated and emits electrical charge proportional to vibration. For simultaneous vibration measurements in 3 orthogonal axes, Type 8688A PiezoBeam® IEPE Accelerometer comes in ±5, ±10, and ±50 g ranges with 1,000, 500, or 100 mV/g sensitivity.

Newport Electronics, Inc.    Santa Ana, CA 92704
Jan 17, 2012 With Model iSD-TH, users can view virtual charts and record temperature, relative humidity, and dew point over Ethernet network or Internet via web browser. Device can trigger alarm if temperature or humidity goes above or below user-selectable set point. Alarms can be sent by email to single user or to group distribution list. Equipped with removable 2 GB SD Flash Memory card, monitor can store up to 7 years of readings taken at 10 second intervals.

Peter Paul Electronics Co., Inc.    New Britain, CT 06050
Jan 17, 2012 With ambient operating range of -40 to +65°C and 316 stainless steel construction, Model E828 automatic safety shut off solenoid valve meet standards for Commercial/Industrial Safety Shut-Off Valves (C/I) per ANSI Z21.21 CSA 6.5. Valve draws 1.8 W; is available in 12 Vdc, 24 Vdc, and 120 V/60 Hz AC versions; and has operating pressure differential of 3-30 psi. Flow capacity sizes include ¾ in. NPT (5.8 Cv), 1 in. NPT (13 Cv), and 1 ½ in. NPT (29 Cv).

Omega Engineering, Inc.    Stamford, CT 06907
Jan 16, 2012 Suitable for mining and heat treating, corrosion-resistant NEP-TX series is comprised of molten metal ceramic sheath thermocouples with 2,282°F temperature rating. Features include connection head with terminal block, and standard construction includes cast iron NEP-TX connection head and 1¼ NPT fitting. Custom probe lengths are available.

Mark-10 Corp.    Copiague, NY 11726
Jan 13, 2012 Series TT01 Digital Cap Torque Testers tests manual cap torque in laboratory or production environments. Tester features adjustable posts and alternate gripping attachments are available for unique container profiles. Torque capacities of 12 lb-in., 50 lb-in, and 100 lb-in. are available. With data output via USB, RS-232, Mitutoyo, and analog voltage, reporting and analysis of test data via PC or other data collectors, TT01 can calculate statistics and store up to 1,000 readings.

NK Technologies    Campbell, CA 95008
Jan 13, 2012 DT Series combines hall effect sensor and signal conditioner into one package for use in DC current applications up to 1,200 A. Available in factory calibrated ranges that facilitate operation while also eliminating zero and span pots, large aperture current transducers offer 4-20 mA, 0-5 Vdc, or 0-10 Vdc outputs that are magnetically isolated from input for maximum safety. While internal power regulation delivers reliable operation, DIN-rail mount enclosure facilitates installation.

Meggitt (Maryland), Inc.    Germantown, MD 20876
Jan 12, 2012 Used for machinery health monitoring, 786-500-D2 houses 500 mV/g sensing element with 5% sensitivity tolerance coupled with ±3 dB frequency response range that covers 0.2-14,000 Hz. Output overcomes data collector noise that can mask peaks at low frequencies, while sensitivity promotes detection of low level vibrations in high-speed applications. Along with CSA approvals for Class I Div 2/Zone 2 areas, multipurpose sensor has 10 g FS acceleration range and broadband noise floor of 250 µg.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Jan 11, 2012 Featuring indoor, outdoor, and night vision viewing modes, 100 MHz Model U1610A and 200 MHz Model U1620A enable engineers to view signal waveforms by zooming in to capture glitches under all lighting conditions. Key measurement capabilities include sampling rate of 1 or 2 GS/sec and 2 safety-isolated input channels. For analysis, oscilloscopes provide deep memory, 1,000 times zooming, and dual zoom windows for overview and detailed displays.

STMicroelectronics    Lexington, MA 02421
Jan 10, 2012 Housed in 4 x 4 x 1 mm package, Model L3G4IS combines user-motion recognition and camera image stabilization for mobile phones, tablets, and other smart consumer devices. Device includes power-down and sleep modes as well as embedded FIFO memory block for smart power management. Operating from 2.4-3.6 V, sensor outputs data through independent I2C and SPI interfaces and offers additional digital embedded features, such as configurable low- and high-pass filters.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Jan 10, 2012 Providing all functions of proximity, polarized retroreflex, and through beam, S50 Series is operated via IP67 sealed potentiometer, or using EASYtouch(TM) push-button teach system, which allows for automatic setting of switching points. Sensors come in flat plastic tubular housing, suited for M18 nut or screw mounting, or metal cylindrical housing featuring cable or M12 connection with EN standard NPN or PNO NO-NC configuration. Class 1 laser emission and analog displacement are available.

Allegro MicroSystems Inc.    Worcester, MA 01615
Jan 09, 2012 Programmed at factory to optimize magnetic switch point accuracy, Model A1244 uses 4-phase, chopper-stabilization technique. BiCMOS wafer fabrication process achieves magnetic stability over temperature and eliminates offset inherent in single-element devices when exposed to harsh environments. Available package styles include SOT-23W miniature low-profile style for surface mount applications and TO-92 3-lead ultra-mini single inline package for through-hole mounting.

Maxim Integrated Products    Sunnyvale, CA 94086
Jan 09, 2012 Housed in 2 x 2 x 0.6 mm package, Model MAX44000 combines digital ambient-light and infrared proximity sensors. Device consumes 5 µA when ambient sensor is enabled, and 7 µA when both sensors are activated, extending application's battery life. BiCMOS technology enables integration of 2 photodiodes and optical filter to reject UV and IR light, enabling IC to replicate optical response of human eye. Applications include smartphones, portable devices, industrial sensors, and presence detection.

GreenPeak Technologies    Utrecht   Netherlands
Jan 09, 2012 Utilizing wireless chips, Smart Junction Box reference design monitors solar systems in detail and controls chain from central unit or remote device. By adding boxes on every panel, real-time status information on electricity generation can be provided. Operator can also switch off individual panels or panel substrings for optimized solar system performance. Data collected from each individual panel can also be shown in configurable GUI software application.

Omega Engineering, Inc.    Stamford, CT 06907
Jan 06, 2012 Made of 316L stainless steel, micro-machined MM Series comes in custom designs that allow user to select range from 10 in. H2O to 5,000 psi and accuracy from 0.4-0.05%. Users can also choose pressure fitting, output, temperature range, and thermal accuracy, as well as Gage, Absolute, Sealed Gage, Compound Gage, Vacuum, differential, and Barometric Pressure ranges. Sanitary models and USB outputs are available.

MadgeTech, Inc.    Contoocook, NH 03229
Jan 05, 2012 Designed to measure, record, and wirelessly transmit data for real-time monitoring, 2-way Model RFOT is available in 2 probe sizes: 4 in. long with transitional diameter from 0.13-0.11 in. and 2.5 in. long with 0.065 in. diameter. Standard RFOT with 4 in. rigid, piercing probe is suited for recording internal temperature of hams, turkeys, and other mid- to large-sized meats. RFOT-SMP, equipped with 2.5 in. piercing probe, is suited for smaller products such as hot dogs and sausages.

Omega Engineering, Inc.    Stamford, CT 06907
Jan 04, 2012 Housed in 38 mm dia x 20 mm high stainless steel enclosure, TX-M12 Series accepts variety of sensors, including Pt100, Pt500, Pt1000, Ni100, Ni1000 and variable resistance up to 10,000 W. Miniature units have M12 connectors that maintain IP67 protection and provide 4-20 mA or 0-10 Vdc outputs with accuracy of ±0.2°C +0.05% of reading. Default scaling for output is 0-100°C and other ranges can be specified. By programming device with optional USB module, user can scale transmitter in field.