2BM Ltd    Nottingham NG9 6DZ  United Kingdom
Sep 09, 2010 Able to be installed into live environments for uninterrupted operation, 2bm iMeter features intelliAmp sensor, which monitors current draw of racks via 16 and 32 A cables. System provides insight into energy requirements of servers, SANs, switches, and attendant supporting equipment, enabling controlled reduction of data center's PUE rating. In addition to continuous voltage and current monitoring, system offers True-RMS current metering, user-configurable alarm thresholds, and Web interface.

Ingersoll-Rand Safety & Security Div.    Indianapolis, IN 46219
Sep 09, 2010 Compatible with most popular proximity credentials, Schlage SXF2110P-K mid-range keypad/proximity card reader allows use of proximity cards and includes PIN feature for 2-step verification. Operating at 125 kHz, the up to six in. read range reader is manufactured of UV-resistant materials which inhibit discoloration in all environmental conditions. Features include potted electronics and circuitry for protection against inclement weather.

Carlo Gavazzi, Inc.    Buffalo Grove, IL 60089
Sep 08, 2010 Utilizing CMOS vision-based camera technology, GUARDIAN can detect both motion and presence. Presence zone can be set through teach process, and time delay for holding door open can be adjusted via potentiometer. In bi-directional mode, any detected motion causes door to open, and in uni-directional smart mode, door will only open when people are moving toward it. Additionally, GUARDIAN will adapt to changes in environment, including sunlight, shadows, snow, rain, and leaves.

Penny & Giles    Irwindale, CA 91706
Sep 07, 2010 Suited for factory automated systems and process control machinery, single output Model SRH501P and dual output Model SRH502P are based on Hall Effect technology, which enables them to operate in high dither vibration conditions with no deterioration of sensing element. Units are available factory-programmed with any one of 341 different angles from 20-360°, in 1° increments. With 0-10 Vdc output option, sensors can operate from 13.5-30 Vdc unregulated power supply.

Toyocom U.S.A., Inc.    Arlington Heights, IL 60005
Sep 07, 2010 Employing QMEMS pressure-sensing in 7.0 x 5.0 x 2.0 mm package, Model XP-6000CA measures pressure from 30-130 kPa with total pressure accuracy of ±30 Pa and 0.3 Pa resolution. Unit provides stable output even under varying external temperatures and environmental conditions because sensor element is made of quartz crystal. Capable of sensing equivalent of approximately 3 cm change in altitude, sensor is suited for integration into activity meters and personal navigation devices.

OmniVision Technologies, Inc.    Sunnyvale, CA 94089
Sep 07, 2010 Built on 1.75 micron OmniPixel3-HS(TM) architecture, Model OV2659 features 1/5 in. optical format and achieves low-light sensitivity of 950 mV/lux-sec. Model OV2643, with ¼ in. optical format, implements 2.2 micron OmniPixel3-HS architecture, which achieves sensitivity of 1,250 mv/lux-sec. Both 2 megapixel sensors deliver 720p native HD video at 30 frames/sec, offer automatic image control functions, and fit 6.5 x 6.5 mm camera module size for handset applications.

Himmelstein, S., & Co.    Hoffman Estates, IL 60195-2011
Sep 06, 2010 Models 2206 and 2207 solid flanged reaction torquemeters are stationary instruments that measure static and dynamic torque of rotating and non-rotating drivelines. Available torque ranges are from 300,000-750,000 lbf-in., with either ±2 mV/V or ±10 V output, and all units are calibrated CW and CCW to rated load. They are suited for industrial torque measurement and control applications including valve actuators, servo valves, hydraulic motors, and stepper motors.

TURCK, Inc.    Plymouth, MN 55441
Sep 06, 2010 TURCK 2430 shaft and 2440 hollow-shaft miniature encoders assign unique output for each position and retain specific position data, even if equipment power is turned off. Non-contact, rugged units have maximum speed rating of 12,000 rpm, with temperature range of -20 to +85ºC to suit diverse plant environments. Radial and axial cable outlet options are available.

Canon U.S.A. Inc.    Lake Success, NY 11042-1113
Sep 03, 2010 With maximum output speed of approximately 9.5 frames/sec, APS-H-size CMOS Image Sensor supports continuous shooting of ultra-high-resolution images. Unit also incorporates Full HD 1,920 x 1,080 pixel video output capability. Images captured with sensor, even when cropped or digitally magnified, maintain definition and clarity. Additionally, sensor enables image confirmation across wide image area, with Full HD video viewing of select portion of overall frame.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Sep 03, 2010 Suited for material handling applications, ML100 Series features bright light spot that optimizes sensing distance and facilitates alignment, even to small objects or reflectors. Status indication details what sensor is doing at any given moment, and because status LEDs are visible from 360°, users can ascertain status from various positions. Operating from -22 to 140°F, ML100 Series provides automatic crosstalk protection and is immune to ambient light.

Wildeck, Inc.    Waukesha, WI 53187
Sep 03, 2010 AutoSenz® M-Series, included with proprietary mechanical and hydraulic vertical lifts, is also available for retrofit on existing mechanical and hydraulic VRCs (Vertical Reciprocating Conveyors). Integrated into VRC control system, sensor provides standard auto-ranging overload/VRC jam protection. Also available, optional AutoSenz® D-Series package provides PLC with digital UI, pushbutton controls, system diagnostics capabilities, and VRC service/maintenance reminder.

Process Measurement & Controls, Inc.    Danbury, CT 06810
Sep 03, 2010 Contained within rugged housing measuring less than 1.1 in. diameter, Model SF52 features dew-point temperature range of -40 to +140. Communication is via 4-20 mA or voltage signal for either dew-point or absolute humidity with less than 3.6°F accuracy and less than 1.8°F annual stability. Transmitter's ½ in. NPT port contains flush filter disc to minimize flow disturbance.

Michell Instruments    Rowley, MA 01969
Sep 03, 2010 Supplied in weatherproof aluminum die cast housing with analog and digital RS485 outputs, wall-mount WM291 has measuring ranges of 0-100% RH and -22 to +160°F with respective accuracies of less than ±2% RH and ±0.7°F. Stability is less than ±1% RH/year, accommodating long-term measurement applications, and integrated interchangeable HYGROSMART module facilitates sensor replacement to minimize maintenance concerns over downtime stemming from recalibration.

Magtrol SA      Switzerland
Sep 03, 2010 Constructed of high quality steel, HDL sensor is designed for geo-technic, underground, and road engineering applications to monitor forces involved on all concrete constructions. It features long term temperature stability, operating temperature range of -25 to +70°C, and size/capacity ratio with nominal range from 600-2,700 kN. Suited for use in harsh environments, sensor is also available in customized models.

HSI Sensing, Inc.    Chickasha, OK 73023
Sep 03, 2010 Steel sensing proximity sensors of 11000 Series feature one-piece construction and come in 3 versions for choice of which side sensing target location is placed. Dual potting design utilizes silicon-based epoxy for internal switch protection and hard epoxy for outside environment shielding. With operating distance of ¼ in., sensors serve applications such as industrial equipment, agricultural equipment, and recreational vehicles.

Fredericks Company, The    Huntingdon Valley, PA 19006-6232
Sep 02, 2010 Featuring all metal design, TrueTILT(TM) 0703-1601-99 accurately measures full tilt range while replacing legacy designs that require multiple sensors. Unit provides ±25° angle/±10° linear range with 1 arc-sec resolution. Sensor can be mounted and soldered to PCBs and requires no special packaging for extreme operating conditions. It is suited for construction laser instruments, wheel alignment equipment, structural monitoring, machine tool/platform leveling, and medical positioning.

Process Measurement & Controls, Inc.    Danbury, CT 06810
Sep 02, 2010 Series PT/EL transmitters incorporate PMC flush-mount sensors with pressure ranges from 5 in. wc to 500 psi and 4-20 mA and/or Hart® protocol communication. Sensors provide monitoring of fluids where clogging substances or sanitary requirements are involved and can be submerged into fluid or mounted directly into pipe or tank. Remote electronics and display can be located up to 60 ft from sensor. All models are CE marked and manufactured from chemical-resistant materials.

Modern Process Equipment, Inc.    Chicago, IL 60623
Aug 31, 2010 Utilizing Allen-Bradley PLC technology, Reliadens(TM) Automated On-Line Density Sampling system allows fish food manufacturers to continuously monitor bulk density, after extruder and coater, to provide continual, closed-loop control of process settings. System draws product sample from process stream, measures density, and returns product to stream with zero waste. With accuracies to 1 g/L, unit can take samples as often as every 30 sec.

Magtrol SA      Switzerland
Aug 30, 2010 Featuring measurement range of 2 Nm, Model TF 205 provides accuracy of 0.1% and overload protection up to 500% rated torque. Flat and rigid design without bearings allows construction of compact measurement assemblies. Based on strain gauge technology, signal transmission is performed through telemetry. Model TF 205 is suitable for motor or engine test benches, especially in automotive industry.

Velodyne Acoustics Inc    Morgan Hill, CA 95037
Aug 30, 2010 Offering measurement and intensity information over 2 cm to 100 m range with ±2 cm typ accuracy, HDL-32E provides high-definition, 3D point cloud enhanced for autonomous vehicle and mobile mapping applications. Sensor rotates 360°, features up to 32 lasers aligned over 40° Vertical Field of View, and generates 800,000 distance points/sec. Weighing less than 3 lb, product measures 5.9 in. high x 3.4 in. wide and is designed to meet military and automotive environmental specifications.