Dwyer Instruments, Inc.    Michigan City, IN 46361
Feb 29, 2012 Designed for continuous measurement of powder and bulk materials in silos, tanks, or hoppers, Series DBOB utilizes internal motor that drives weight suspended by firm stainless steel tape down to bulk material level. Upon reaching material, unit reverses and weight is drawn back into upper stop position. Distance weight descends is electronically measured based on internal rotations of unwinding tape. User-programmable to output height or volumetric signal, device measures at rate of 0.6 fps.

H-B Instrument Co.    Collegeville, PA 19426
Feb 29, 2012 Polycarbonate hydrometer series features shatterproof design, glass-like clarity, and easy-to-read scale. This line of hydrometers covers most popular ranges of specific gravity: brix, baume, sodium chloride, and salt brine. Each item is calibrated against NIST standards and includes statement of accuracy traceable to NIST.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Feb 28, 2012 With technology that allows detection of fluorescent marks on any object separately from its color, material, and distance inside operating range, LD46 series addresses needs of applications in pharmaceutical, woodworking, automatic packaging, and mechanical industries. Sensors avoid interferences or reflections from non-luminescent surfaces such as mirrors, glass, and shiny metal surfaces and feature bar-graph indicator, IP67 mechanical protection, and switching frequency up to 2 kHz.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Feb 28, 2012 Housed in 3.95 x 3.95 x 0.75 mm surface-mount package with I²C interface, Model VCNL4010 combines IR emitter and photo-pin-diode for proximity, ambient light detector, signal processing IC, and 16-bit ADC. Interrupt function enables sensor to work independently until predefined proximity or ambient light event occurs, and then it wakes up microcontroller, minimizing power consumption. With programmable LED drive current from 10-200 mA, sensor achieves object detection up to 200 mm.

Aalborg Instruments    Orangeburg, NY 10962
Feb 28, 2012 Aalborg®'s TIO totalizer can be used as monitor for GFM and AFM flow meters or as controller with GFCs and AFCs. It converts analog mass flow meters and controllers into precision digital units via RS 232 or RS 485 interfaces (multi-drop capacity up to 64 devices). Two fully independent programmable totalizers allow up to 9 digit total readings and are updated every 100 msec. Totalizer can be used with third party devices with 0-5 Vdc / 4-20 mA inputs and outputs.

POSIFA Microsystems Inc    San Jose, CA 95112
Feb 28, 2012 As drop-in, pin-compatible upgrade to Honeywell AWM3000 series, PMFc3000 series incorporates MEMS and microelectronics technologies and replaces membrane-cavity structure with solid-state thermal isolation process. This promotes reliability by eliminating field failures associated with pressure shock and contamination. While meeting same packaging and calibration specifications of AWM3000, PMFc3000 series offers initial output tolerance to less than 2% FS.

Columbia Research Labs., Inc.    Woodlyn, PA 19094
Feb 27, 2012 Combining wireless technology and data acquisition capabilities from EmNet LLC with low-noise accelerometers, QUAKEnet(TM) can monitor bridges, high rises, and other civil engineering structures. Accelerometers are available in 1, 2, and 3 axis configurations with ranges from ±0.1 G to ±2 G. Housed in 9.875 x 5.063 x 3.125 in. NEMA enclosure, QUAKEnet can be powered by solar cell, lithium battery, or 110/220 V and supports communication by GSM cell phone, CDMA cell phone, or 900 MHz ISM radio.

IRadimed Corporation    Winter Park, FL 32792
Feb 27, 2012 The iMAGOX(TM) 2460 SpO2 Monitor includes wireless remote control, giving clinicians ability to safely monitor patients and interact with iMAGOX from outside scanner room. System is intended for use in MRIs with magnet strength from 0.2-3 T, and is completely operational up to 10,000 Gauss line. System uses fiber optic SpO2 sensor that, when used with Masimo SET technology, provides reliable SpO2 readings during conditions of low perfusion and/or patient movement.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Feb 24, 2012 Available in basic, standard, and enhanced versions, TL46 Series utilizes wide-spectrum RGB LED to emit precision light spot. Units offer switching frequencies of 15, 20, or 30 kHz, as well as automatic, manual, and dynamic settings, depending on version. Providing NPN/PNP and analog output, sensors have standard fixing, M12 connector rotatable on 5 positions. Units are suited for automotive, beverage, and packaging industries.

Honeywell Sensing and Control    Golden Valley, MN 55422
Feb 24, 2012 Housed in IP67-sealed package with integral connector, RTY Series Rotary Position Sensors provide 12 million cycle product life and 8 operating ranges up to 360°, which are tolerant to over-travel. Low and high voltage versions cover input voltage range of 4.5-30 Vdc. Providing non-contact operation, sensors use magnetically biased, Hall-effect IC to sense rotary movement of actuator shaft over set operating range. Devices are protected against both reverse polarity and EMI.

OmniVision Technologies, Inc.    Sunnyvale, CA 94089
Feb 24, 2012 Developed for compact designs, 1/9 in. OV9724 CameraChip(TM) Sensor leverages 1.4 micron OmniBSI+(TM) pixel architecture to enable camera modules of less than 2.5 mm in height for use in narrow-bezel devices such as smartphones, notebooks, and tablets. Device provides 720 p HD video capture at 30 fps or cropped VGA at 60 fps. Supplied with 1-lane MIPI interface, Model OV9724 offers full-frame, sub-sampled, or windowed 8- or 10-bit images. Image processing functions are programmable via SCCB interface.

Ebara Technologies    Sacramento, CA 95838
Feb 24, 2012 Capable of connecting 1,200+ components, EBANET3 stores and monitors real-time operating data and historical trending data. Web browser is only required program; no software installation is necessary on user's computer. With frequent data sampling, automated EBANET3 provides remote alert notifications, which are available via email or SMS.

General Monitors    Lake Forest, CA 92630
Feb 23, 2012 Suited for use in open, well-ventilated areas, Gassonic Observer-H senses airborne ultrasound emitted from leaking gas at high pressure. Detector has 20 m radius coverage zone for detection of leaks as small as 0.1 kg/sec and is designed for failsafe operation. In addition to HART communications, features include Modbus with single and block transfer modes, Emerson AMS Intelligent Device Manager support, and event logging. Unit is immune to changing wind directions as well as gas dilution.

Mini-Circuits    Brooklyn, NY 11235
Feb 23, 2012 Measuring 4.89 x 1.74 x 0.95 in., Model PWR-8FS turns Windows® or Linux® PC into power meter. USB Human Interface Device provides 10 msec measurement speed, dynamic range of -30 to +20 dBm, and frequency range of 1 MHz to 8 GHz. Built-in GUI measurement application software enables user to perform measurements on RF components such as couplers, filters, and amplifiers, as well as display numerical data and graphs.

Measurement Specialties, Inc.    Hampton, VA 23666
Feb 23, 2012 Designed with transverse sensitive axis, Model 64L complies with SAE J2711 standards for anthropomorphic dummy instrumentation. Features include full bridge output configuration with temperature range of 0 to +50°C, and internal gas damping provides shock survivability as well as flat amplitude/phase response up to 7 kHz. Based on 3rd generation silicon MEMS sensing technology, unit is available from ±50 through ±6,000 g.

Honeywell Advanced Circuits    Minneapolis, MN 55426
Feb 23, 2012 Offered with operating ranges up to 360° and input ratings from 4.5-30 Vdc, RTY Series comes in IP67 package with integral connector, reverse polarity protection, and EMI resistance. Solid-state Hall-effect technology provides non-contact operation and low torque actuation, while industry-standard AMP termination, 32 mm mounting pitch, North American and European pinout styles, and compact package foster replacement in existing applications.

Turck USA    Minneapolis, MN 55441
Feb 21, 2012 Using FDA-rated materials for washdown applications, uprox+ Q42 comes in top-facing and front-facing models that require no correction factor to detect any metal type. Unit is constructed with stainless steel connector and PA12 thermoplastic housing that resists chemicals and caustic cleaning agents, as well as shock from impact. Operating in temperatures from -40 to 100°C, Model Q42 offers sensing range of 50 mm to all types of metals.

Predictive Sensor Technology    Lynchburg, OH 45142
Feb 21, 2012 Based on iStatus(TM) software, which checks each data transmission against user-configured alarm thresholds, PST-THD Wireless Environmental Temperature, Humidity, and Dew Point Sensor/Transmitter alerts user via e-mail or text when targets are reached. Battery-powered system uses 900 MHz wireless protocol to ensure that other communications will not be affected. With open field range up to 1,200 ft, sensor/transmitter measure temperature from -40 to 255°F and RH from 0-100%.

Honeywell Advanced Circuits    Minneapolis, MN 55426
Feb 21, 2012 With up to IP69K protection and CE compliance, stainless steel PX2 Series uses piezoresistive sensing technology with ASIC signal conditioning to monitor performance and efficiency in industrial applications while resisting effects of moderately harsh media. Standard or custom connectors, ports, pressure types/ranges, and output options lend to configurability, and ranges from 100-500 psi are available. Compatible with varied media, series measures absolute or sealed gage pressure.

Gemini Integrated Electronics Ltd    Reading RG5 4XN  United Kingdom
Feb 21, 2012 By deploying advances in digital signal processing, Emstat Dual Band 35-013 constantly monitors connection to ground, operators' benchmats, and dual wristband/cord configurations. Should any connections be broken, audible alarm will sound to warn operator, while status of electrostatic protected area is clearly shown on display panel, indicating fault needs attention. Applications include disk drive assembly, semiconductor fabrication, flat panel fabrication, and electronics assembly.