Sensors Monitors & Transducers

Controls & Controllers, Sensors Monitors & Transducers

Position Control Sensors feature ASCII serial protocol.

January 4, 2002

Temposonics® S Series ServoSensors combine sensor and embedded closed-loop position controller. ASCII protocol and Windows(TM) application setup software enable use of common translator software. Model SH rod style sensors are designed for internal mounting where high pressure conditions exist (5,000 psi continuous/10,000 psi spike). Model SP profile sensors are magnet-mounted and are used in... Read More

Sensors Monitors & Transducers

Fork Sensor detects all label types.

January 4, 2002

GSU 14/24 ultrasonic sensor has either PNP or NPN outputs, and makes adjustments via push button remote teach-in feature. It comes standard with anodized aluminum housing and IP 67 protection rating making it suitable for almost any environment. Sensor can detect foil on foil, foil on paper, paper on paper, metallized foil, and thin metal foils as well as clear, metallic, and conductive ink... Read More

Computer Hardware & Peripherals, Sensors Monitors & Transducers

Monitor and Touchscreen come with swivel arm mount.

January 3, 2002

Model GDH package includes 15 in. TFT LCD color monitor with touchscreen and 5-axis swivel arm. Monitor has brightness of 230 nits, resolution of 1024 x 768 pixels at dot pitch of 0.297 mm, and viewing angles of 160 deg in horizontal and vertical planes. Scratch-resistant analog-resistive touchscreen lets users point to objects on screen with glove, bare finger, or any kind of stylus. Swivel arm... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

RTD Probes measure temperatures from -58° to 932° F.

January 3, 2002

TRE series probes are constructed from single Platinum 100 RTD sensor insulated with densely packed magnesium oxide and imbedded in 3 mm O.D. shank formed from 316 stainless steel. Shank lengths of 3.94, 5.91, and 9.84 in. are available. TRE probes are finished with copper connection cable (22 AWG) covered with silicon rubber insulation to provide protection up to 356°F. Connecting cable is... Read More

Sensors Monitors & Transducers

Monitor detects combustible gases.

January 2, 2002

Compact Model 2001 solid-state monitor uses semiconductor-type sensor to continuously check area for combustible gas in the 500-10,000 ppm methane range. It has LED indication of alarm, audible buzzer output, electronic output signal to alarm panel, and normally open alarm relay. Fail-Safe normally closed relay is available as option. Except for periodic calibration to verify alarm setting, no... Read More

Sensors Monitors & Transducers

Triaxial Accelerometer makes low frequency measurements.

January 2, 2002

K-Beam accelerometer has 3-layer silicon micro-machined sensing elements for steady-state and dynamic measurements over ranges of ±2, ±10 and ±25 g, with sensitivities of 1000, 200 and 80 mV/g, respectively. Accelerometer is suitable for making steady state or low level, low frequency measurements in applications such as vehicles, structural analysis, bridge vibration, robotics,... Read More

Sensors Monitors & Transducers

Sensor offers continuous level measurement.

January 2, 2002

+GF+ SIGNET 2222 Magnetostrictive Level Sensor measures non-coating liquids such as water, acids, bases and corrosive chemicals. It is available with 316SS or SYGEF® PVDF body. NEMA 6/IP68 rated tube is 5/8 in. and houses wiring and sensor electronics. Microprocessor-based technology provides accuracy of ±0.1% of full scale and resolution of 0.01 in. Model 2222 features 3/4 in. NPT... Read More

Sensors Monitors & Transducers

Pressure Sensors feature digital CANopen-BUS output.

December 27, 2001

Melt and Industrial Pressure Sensors with digital CANopen-BUS technology converts low signal pressure sensing elements from analog to digital, then processes further in intelligent microprocessor. Scanning and conversion rate of pressure signal is 20 milliseconds. Digital pressure signal with 13 bit resolution is continuous on 2-wire CAN-BUS connection, and is controlled and analyzed by CANopen... Read More

Sensors Monitors & Transducers

Current Sensor is self-powered.

December 19, 2001

TCS Series Go/No Go Sensor/PLC interface can be directly connected to PLC's digital input module or to load rated up to 1 A. It can detect overcurrent or undercurrent events, and signal PLC or switch load device to ON or OFF. Onboard toroidal sensor monitors current flow through ac loads up to 50 A steady, 300 A inrush. TCS Sensor is available with adjustable or factory-fixed actuation point. Read More

Sensors Monitors & Transducers

Torque Sensors are designed for low torque applications.

December 18, 2001

STS2220 rotary shaft torque sensors are available in capacities from 1.0 to 10.0 Nm. They feature one-piece outer housings and pre-lubricated bearings, and accept either AC or DC excitation voltage for compatibility to most readout instruments. Units have 1.5 mV/V nominal output at rated capacity, bridge resistance of 350 ohms, maximum speed of 10,000 rpm, and non-linearity of +/- 0.1% of full... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Encoder mounts on machine or motor shaft.

December 18, 2001

Sealed Series HS20 Dynapar Hollowshaft Encoder is available in 2 in. configuration with English and metric hub sizes ranging from 1/4 to 5/8 in. and 6 mm to 16 mm. It mounts directly to shaft using hollow, floating shaft mount and anti-rotation spring tether. Unit has precision bearings and seals at both ends of hollow shaft, LED light source, operating speeds to 100 kHz and NEMA 4/IP65 rating.... Read More

Sensors Monitors & Transducers

Position Monitor is adaptable to communication modes.

December 18, 2001

Model 1250B programmable position monitor, designed for gate and valve monitoring, accepts inputs from rotary synchro transmitter devices. It is configured to give proportional gate/valve position signals that can be interpreted as position in Percent-of-Closed status. Model 1250B performs nonlinear conversions and can display data in user-defined units such as degrees, percent, inches, or feet... Read More

Sensors Monitors & Transducers

Rotary Torque Sensors eliminate need for slip ring.

December 18, 2001

Model 01279 line of rotary torque sensors use non-contact infrared digital signal transmission, eliminating maintenance and wear problems of conventional slip ring technology. Sensors have high level analog output to represent torque load. They can be used as drop in replacements for many existing rotary torque sensors. Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Coating Probe measures small parts.

December 17, 2001

Handheld EGA06H probe measures nonmagnetic coatings, including zinc, chrome, copper, tin, paint and enamel on ferromagnetic base material using magnetic induction method according to DIN 50981. Measuring range is 0 to 28 msec. Small field effect is suited for measuring small parts or areas, such as nuts, bolts, screws and other fasteners. Smallest surface probe can measure is 0.08 in. dia., 0.04... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Gas Meter is suitable for small to medium line sizes.

December 17, 2001

CMF400 4 in. sensor, coupled with MVD Technology transmitter, provides gas flow accuracy of 0.35% and repeatability of 0.20%, with capability of measuring natural gas, for example, up to 110,000 scfm. With secondary containment standard and pressure rating of 1450 psi, CMF400 has UL, CSA and CENELEC zone 1 approvals. Read More

Sensors Monitors & Transducers

Fixed Gas Sensor features 2 gas monitoring points.

December 17, 2001

WorksAlone 2(TM) fixed-point gas detection monitor, incorporating dual-sensor design, displays gas concentration levels and signals alarm conditions when programmed alarm points have been exceeded. It provides 1 or 2 gas monitoring points installed on-board or remotely from electronic controllers. Features include automatic, non-intrusive calibration and split-screen, extended-temperature LCD... Read More

Sensors Monitors & Transducers

Sensor converts shaft to torque sensor in 15 minutes.

December 17, 2001

Model 1650B Snap-On Rotary Torque Sensor clamps onto drive train to take measurement data. It does not break into drive train to install in-line torque cell, and requires no professional installation. Model 1650B comes pre-calibrated. Installation requires users to clamp on 2 halves of sensor shell, position antenna, and connect wireless receiver. Available for shaft diameters from 2.5 to 15 in.,... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Tranducer Kit is fully re-rangeable.

December 14, 2001

DP15 Pressure Transducer Kit contains variable reluctance sensor with 10 replaceable sensing diaphragms, O-rings, bleed screws, gaskets, AC power adapter, CD379 portable indicator with LCD readout and cables. Diaphragms support full-scale ranges between ±2.22 in. H2O to ±3200 psi. Unit operates from -50 to +250°F while delivering ±0.25% accuracy. Indicator provides ±2 Vdc analog... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Electrochemical Sensors monitor CO, H2S and O2.

December 13, 2001

XS-R Series has three-electrode design, providing greater specificity to target gases, resistance to over exposure, and stability in presence of changing temperatures, pressures and humidity. Sensors are available for carbon monoxide, hydrogen sulfide and oxygen. Read More

Sensors Monitors & Transducers

Torque Flange offers ±3 kNm measuring range.

December 13, 2001

Designed for automotive test stand applications, T10F offers minimum vibration bandwidth of 160% and breaking torque >400% of full scale. Continuous rotational speed is 10,000 rpm. Signal conditioning devices such as industrial amplifiers and complete digital measuring chains with software are available for torque flange. Amplifiers provide linking to numerous interfaces and fieldbus systems. Read More