Continental Disc Corporation    Liberty, MO 64068
Jun 24, 2011 Designed for European pharmaceutical, food and beverage, and biotech industries, SANITRX® LPX features instantaneous full-open relief area for protecting equipment, vessels, systems, and people from overpressure conditions. This stainless steel differential pressure relief device meets ASME BPE and USP Class VI criteria and has rated burst pressure of 0.3 min to 0.5 max barg @ 20°C. Solid metal construction provides cleanability for CIP/SIP applications.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 24, 2011 Sized as 0.8 in. cube, Series 3713B DC MEMS Response Accelerometers measure low-frequency vibration and motion and are available in full-scale ranges from ±2 to ±200 g. Units feature gas-damped, silicon MEMS sensing elements and offer frequency overload protection to accommodate variety of automotive testing requirements. Hermetically sealed in titanium housing, devices withstand severe operating environments. Supply voltage regulation permits operation from +6 to +30 Vdc.

Sensortechnics Inc.    Dublin, CA 94568
Jun 23, 2011 Based on thermal mass flow measurement of air or gas through micro-flow channel integrated within silicon sensor chip, LBA sensors feature full analog on-chip CMOS signal conditioning that allows for linear and temperature-compensated outputs. Measuring principle sensitivity lends to resolution and offset stability, while flow rate ensures immunity to dust and condensation. Also, connecting tubes and input filters can be used without recalibrating or correcting output signal.

Sensortechnics Inc.    Dublin, CA 94568
Jun 23, 2011 Based on ceramic pressure cells with optimal media compatibility, KMA Series measures gage pressures of corrosive and aggressive gases and liquids from 7-1,450 psi. Sensors utilize internal digital signal conditioning to deliver calibrated and temperature compensated 0.5-4.5 V output signals. Stainless steel housing is suited for space-saving integration into demanding OEM devices and machines. Custom pressure ranges and wide selection of pressure fittings are available.

Omega Engineering, Inc.    Stamford, CT 06907
Jun 23, 2011 Offered in shielded and unshielded models with short or standard length barrel, E2E-2DC Series features solid potted internal circuitry to withstand shock and vibration as well as exposure to cutting oils and washdown locations. Two-wire DC sensors are made of stainless steel or nickel-plated brass, and operate from 10-30 Vdc at temperatures from 13-158°F. Suitable for metal detection in food/pharmaceutical industries, units include prewired 6.6 ft PVC cable with stripped leads or M12 connector.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 23, 2011 With operating temperature range of -65 to +325°F and temperature coefficient of less than 0.010%/°F, Series 339A Triaxial ICP® Accelerometers are suited for powertrain testing, NVH, road load data acquisition, and durability testing in climatic chambers. Sensors have measurement range to 8,000 Hz and built-in low pass filter to alleviate effects of high frequency overloads caused by metal-to-metal inputs. Both stud and adhesive mounting configurations are available.

Sensor Electronics Corp.    Minneapolis, MN 55436
Jun 23, 2011 Combining SEC 3000 stainless steel sensor with SEC 3100 explosion-proof transmitter, Gas Detection System identifies traces of toxic gas concentrations and reacts instantly to dangerous gas levels. Transmitter shows actual gas levels in ppm or % LEL. At setpoint, integral relays can trigger alarms, turn on supply/exhaust fans, and shut down lines. Plug-in memory stick, which logs permanent record of actual gas levels, can be pulled from transmitter to download data to computer.

Crouzet    San Diego, CA 92154
Jun 23, 2011 Complying with DIN 41 636-6 Form F, PBX Secure Safety Switches guarantee forced opening of NC contacts even in event of short circuit and/or welding due to overcurrent. Long overtravel actuator allows any tolerance deviations of sub-assembly in which switch is incorporated to be absorbed. Available in IP40 and IP67 rated versions, switches serve as auxiliary safety contacts for medium-voltage circuit breakers, motorized disconnect switches, and ground disconnect switches.

Dynapar    Gurnee, IL 60031
Jun 23, 2011 RIM Tach 8500 is ruggedly designed with stainless steel sensor modules and ductile cast iron housing. Sensor module uses magnetic technology that delivers 70 thousandths air gap, promoting product reliability and application forgiveness, while axial play of up to 0.50 in. facilitates installation. Wheel design has metal edge guard that protects magnetic wheel material from accidental strikes and allows wheel to lock to shaft without shaft damage.

LG Electronics USA, Inc.    Englewood Cliffs, NJ 07632
Jun 22, 2011 Using zero client virtual computing technology, 19 in. P Series Model N1910LZ connects server host and simultaneously redistributes its capabilities to multiple users through Internet Protocol. LED monitor utilizes Teradici® PCoIP® Chipset and VMWare software to deliver secure virtual solution that broadens integrated computing beyond designated labs to offices and classrooms. With enough bandwidth, one server computer can potentially support more than 100 redistributed systems.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 22, 2011 With frequency range of 4.7-4,000 Hz ±5%, EX600B13 and EX600B14 are suited for measuring vibration in gas turbines. Components include side-exit charge mode sensor; 10 ft, hermetically sealed, hard-line cable; and ICP® charge amplifier. Able to withstand environments up to +900°F, CSA-approved products employ sensing element insensitive to base strains, thermal transients, and pyroelectric effects. Design eliminates contamination and common mode noise concerns.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 22, 2011 Featuring 2-pin MIL-C-501 side-exit connector, ICP® Model HT602D01 measures vibration on paper machines and other high temperature applications. Ceramic shear, hermetically sealed accelerometer provides 100 mV/g sensitivity with frequency range of 30-480,000 cpm (0.5-8,000 Hz). Housed in stainless steel, device is suited for predictive maintenance of gearboxes, motors, bearings, and machine tools.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 21, 2011 Provided in preloaded flange mount configuration that allows 8 screw installation, 261A Series can simultaneously measure dynamic and quasi-static forces in 3 orthogonal directions. Units feature full scale measuring ranges from 500-4,000 lb in X and Y directions, and from 1,000-10,000 lb in Z direction in 3 mechanical envelopes. All ranges are available in choice ICP® or change output versions as well as English or metric mounting threads.

Fluke Networks    Camarillo, CA 93010
Jun 21, 2011 Measuring 2 in. thin and weighing less than 5 lb, OptiView® XG automatically discovers path between 2 points in network and monitors performance to identify network issues, decreasing time required to isolate network versus application problems. Mobile device has 3 on-board spectrum analysis radios that allow simultaneous network discovery, wireless performance analysis, and interference detection. Features include 10.25 in. 1024 x 768 screen, 10/100/1000M RJ-45 ports, and 100/1000M SFP+ port.

DeFelsko Corp.    Ogdensburg, NY 13669
Jun 21, 2011 Standard and Advanced PosiTector® 6000 models feature built-in memory, onscreen statistics, USB mass storage, and Fast mode. Additionally, Advanced models include reversible color LCD, scan mode, onscreen help, real-time graphing, and picture prompting. Instruments can upload stored measurements, generate customizable reports, and share results via secure internet connection. Alternatively, stored readings and graphs can be accessed using universal PC/Mac Web browsers or file explorers.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 21, 2011 Able to withstand environments up to +900°F, Series 600B13/B14 includes side-exit charge mode sensor, 10 ft hermetically sealed hard-line cable, and integral ICP® charge amplifier for power generation monitoring applications. Shear mode sensing element provides optimal performance for dealing with transient temperature changes and spiking. With frequency range of 282-240,000 cpm (4.7-4,000 Hz), Models 600B13 and 600B14 feature sensitivity of 100 mV/g and 10 mV/g, respectively.

AEMC Instruments    Foxborough, MA 02035
Jun 21, 2011 Water-resistant and IP65-rated, 4-channel Simple Logger® II Model AL834 features 4 integral current sensors, each measuring 24 in. long and capable of wrapping around 8 in. conductor. Selection of data storage modes, as well as data sampling rates is user programmable through DataView® software. Up to 1,000,000 measurements can be stored in internal nonvolatile memory. Powered by 4 C cell alkaline batteries, logger communicates to DataView software via Bluetooth technology.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 20, 2011 Operating over 20 Hz to 20 kHz range, models 130E20, 130E21, and 130E22 have similar specifications but are respectively differentiated by BNC, 10-32, and SMB connectors. All models have electret designs and operate on free-field response type, which compensates for their own presence in sound field. Sensitivity is 45 mV/Pa, with noise dloor rating of 30 dBA, and sound pressure level measurement is rated up to 122 dB. TEDS v1.0 lets user locate specific microphone within large group.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jun 20, 2011 Series 4115K uses non-contact, rotary transformers for sending excitation voltage to and receiving measurement signals from strain gauge instrumented rotating sensor element. Flange and splined shaft design conforms to AND 10262/20002, making these transducers suited for torque studies on aerospace hydraulic motors and pumps. Other applications include dynamometers, drive shafts, transmissions, fans, and electric motors. Optional pickup provides output proportional to speed.

NK Technologies    Campbell, CA 95008
Jun 20, 2011 Monitoring resistive or inductive loads to detect current usage on large machines using AC current, ATCR Series flexible loop current transducers consist of sensing coil and True RMS signal conditioner. Each model uses 2 wires to provide power supply and output signal, allowing installer to pass coil around conductors without disconnecting existing wires. Supplied in 35 mm DIN-rail mount enclosure, series offers single range functionality and output magnetically isolated from input.