Acorn Energy, Inc.    Montchanin, DE 19710
Mar 23, 2012 In addition to delivering information, Computer Automated Test Station can receive and execute commands, allowing user to reprogram and clear existing alarms remotely, and run diagnostic tests without visiting site. System works with Rectifier Monitor, which measures and reports voltage and current being directly applied to steel pipeline by rectifier, and Pipe-to-Soil Monitor, which measures and reports actual voltage at specific protected points along pipeline to pinpoint vulnerable areas.

American Sensor Technologies, Inc.    Mt. Olive, NJ 07828
Mar 22, 2012 Providing pressure and temperature outputs from single process point, AST20PT Stainless Steel Media Isolated Pressure/Temperature Sensor and AST46PT Explosionproof Pressure/Temperature Transmitter minimize process penetration points and leaks in critical systems. Model AST46PT offers pressure ranges up to 20,000 psi, while Model AST20PT ranges up to 45,000 psi. Featuring 1-piece body construction, microprocessor-controlled devices are available in temperature ranges from -40 to 250°F.

BEI Sensors (BEI Industrial Encoders)    Goleta, CA 93117
Mar 22, 2012 Supplied in IP67-sealed housing, Model 9960 comes in configurations with various termination options, single or dual outputs, and 24 active electrical angles. Versatile applicability is due to 360° turn capability. Solution serves as rotary motion control sensor for applications in harsh environments, including steering and pedal positioning in vehicles; marine steering and speed control; wheel and throttle position for material handling; and valve position for process control.

Norphonic    Bergen   Norway
Mar 22, 2012 Designed to configure, monitor, and troubleshoot VoIP telephones from one location, Remote Management Software can place telephones into groups and manage groups individually. Users can receive self monitoring and fault check status on telephone components, audio status, handset on/off, and line checks. From remote location, users can also switch VLAN and RSTP functionality on/off, manage SIP proxy settings, install firmware updates, and re-boot telephones.

RKI Instruments, Inc.    Union City, CA 94587
Mar 22, 2012 With IP66 protection, Model GX-2012 offers capabilities for datalogging as well as purge and barhole testing for pipeline companies and gas utilities. Unit can monitor standard confined space gases - LEL combustibles, O2 deficiency, CO, and H2S - as well as 100% volume Methane while dynamically displaying either percent LEL or percent volume with auto-ranging ability. Along with internal sample drawing pump, 5-sensor portable gas monitor features calibration and bump test reminders.

Huntingdon Fusion Techniques-USA Inc.    Melbourne, FL 32936-1175
Mar 21, 2012 Along with indicators for low battery and oxygen sensor replacement, PurgeEye®100 features algorithm in software that corrects reading at low oxygen levels to ensure accuracy and repeatability. Integrated auto-calibration functionality requires users to press button both at ambient and lowest oxygen reading; instant calibration is then set at 0.01% O2. Tripod mounting enables monitors to be located securely in accessible viewing position without additional clamping fixtures.

Pepperl+Fuchs    Twinsburg, OH 44087
Mar 21, 2012 Designed to detect differences in 2 colors of media, DK12-11-IO Series includes delivers 4 output options from single sensor. Units are IO-Link compatible, and feature customizable and visible diagnostic LEDs and ability to invert output state and disable adjustment potentiometer for tamperproof requirements. With IO-Link, it is also possible to quantify colored object and its background color based on how both reflect light from red, green, or blue LEDs.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Mar 21, 2012 Featuring 2-wire loop-powered operation, Model VBT continuously detects vibration in system and monitors for unusual operating conditions and potential failure. Vibration is converted into analog signal at current output. Housed in 316 stainless steel, transmitter operates from -22 to 221°F with frequency range of 10-1,000 Hz and better than ±3% accuracy. Unit includes standard M12 micro cable connector and interchangeable ¼-28 UNF/M8 or ¼-28 UNF mounting studs.

Schroeder Industries LLC    Leetsdale, PA 15056-1025
Mar 20, 2012 Designed to fit standard indicator port of Schroeder return line hydraulic filters, MS17, MS18, and MS19 Electrical Dirt Alarm® Indicators alert operators as to need to change element. Crimped body design incldues Aluminum 2011-T-3 housing, and thermal lock out option can prevent false indications during cold starts. Compliant to IP67, MS17 has 4-pin Brad Harrison connector, MS18 has 2-pole AMP Junior Power Timer connector (AMP-JPT-P2), and MS19 has 2-pole Deutsch connector (DT 04-2P).

Measurement Specialties, Inc.    Hampton, VA 23666
Mar 19, 2012 Designed for characterizing whole body vibration in accordance with ISO 2631-1 and ISO 8041, Model 606M2 features nitrile rubber seat pad that incorporates removable triaxial IEPE accelerometer with 100 mV/g output sensitivity. Unit is designed for low-frequency measurements from 0.5-1,000 Hz and with resolution of less than 0.4 mg. Detachable 10 ft cable is included with 3 BNC connectors for facilitated interface, and dynamic range is ±50 g with over shock protection to ±5,000 g.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Mar 19, 2012 With overall height of 0.33 in., Model 3334A1 is suited for vibration testing where vertical space is limited. Miniature unit is available with sensitivity of 10 mV/g and features titanium housing, 5-40 mounting stud, and 5-44 radial connector. Hermetically sealed for operation in high humidity and dirty environments, accelerometer supports product response testing applications in addition to environmental stress screening.

Critical Environment Technologies Canada Inc.    Delta V4G 1M3  Canada
Mar 19, 2012 Integrating sensor, sample pump, and flow meter, GEM-MRI is installed outside of MRI room with sample hose running from monitoring system to sampled environment. Unit operates from 24 Vdc/Vac with measurement range of 0-25.0% volume oxygen. In addition to LED digital display of real-time oxygen levels, 2 adjustable levels of oxygen alarms, and audible alarm with silence/acknowledge pushbutton, system includes 2 dry contact relays rated 5 A at 240 Vac SPDT and 4-20 mA analog output signal.

Honeywell Advanced Circuits    Minneapolis, MN 55426
Mar 16, 2012 Housed in subminiature SOT-23 surface mount package, SS39ET Series monitors magnetic fields from permanent magnet or electromagnet. Devices respond to both North and South poles, and can be powered with voltages as low as 2.7 V with low current consumption of 6 mA at 5 Vdc. Operating from -40 to 212°F, ICs are suited for pump control, current sensing for motor load monitoring, handlebar/throttle position sensing, and anti-tampering magnetic field sensing in smart remote utility meters.

Adcole Corp.    Marlborough, MA 01752-3067
Mar 16, 2012 Providing repeatable results, Model 1000 lets operator load part, press one button, and obtain all surface roughness measurements within one sequence. Measureable parameters include Ra, Rp, Tp, and Rsk on main and rod journals and thrust faces. With GE Fanuc® motion controls and Allen-Bradley components, automatic system utilizes 3 variable reluctance pickups. Each has 5 micron diamond stylus and can scan 2,000 points per mm. Typ cycle time is 6 min, and various report outputs are offered.

Solartron Metrology    Gastonia, NC 28054
Mar 16, 2012 Featuring modular construction with stainless steel body and core carrier, SR Series is suited for challenging laboratory, test, and process control applications. Transducers, pressure tested to 100 bar, are available IP68-rated or hermetically sealed with extra screening against electrical interference. Submersible version comes with 3 m of FEP cable standard. Screw mount options are available, and standard mount versions are offered as free core or guided armature.

CAS Data Loggers    Chesterland, OH 44026
Mar 16, 2012 Designed to protect life science materials, Accsense A1-08 automated wireless system monitors temperatures from -40 to +70°C with 0.1°C resolution, provides cloud-based data storage and real-time reporting, and can connect to 6 NTC thermistor inputs. Solution also serves as temperature alarm system, complete with email, pager, and phone alert capabilities. Along with user-set sampling rate from 30 sec to every 24 hr, datalogger offers 2 inputs for connection to digital sensors.

Platinum Tools    Camarillo, CA 93012
Mar 15, 2012 Designed to qualify and quantify dark (unpowered) coax systems, Coax Clarifier(TM) determines individual run quality and system's capability to deliver good quality video at SD and HD levels. Backlit LCD shows loss levels on each coax cable run and displays bar graph of quality for each, and wiremap remotes let technician singlehandedly map entire system. Detecting and testing splitters for quality, shorts/opens, etc. is also done on each test.

Keyence Corporation of America    Itasca, IL 60143
Mar 14, 2012 Combining functionality from machine vision and traditional sensors into one system, IV Vision Sensor accommodates range of presence detection applications. Standard equipment - Hi-R illumination, high-performance quad lens, and selection of 8 different sensor heads - provide image sharpness, clarity, and stability, while Easy Navigation feature enables setup to be accomplished in ~1 min. Supplied in IP67 enclosure, sensor also offers automatic focus and one-touch brightness adjustment.

Columbia Weather Systems, Inc.    Hillsboro, OR 97124
Mar 14, 2012 With 2 ISO second-class compliant solar radiation sensors as options, Weather MicroServer can provide efficiency monitoring for solar panel arrays. Kipp and Zonen and Hukseflux thermopile-based sensors can be mounted horizontally for global radiation measurement or at plane of array for PV solar applications. Used in conjunction with weather stations, Weather MicroServer offers Internet and Industrial protocols for applications including XML, FTP, Modbus/OPC, and SNMP.

Acuity Brands Lighting    Conyers, GA 30012
Mar 13, 2012 Available in Passive Infrared (PIR) and Dual Technology (PDT) versions, Sensor Switch® WSD NGX with convertible neutral/ground exchangeable (NGX) feature provides contractors with universally code compliant solution regardless of job site wiring requirements. Wall switch sensor can use neutral conductor or ground connection, providing solution to meet neutral/ground wiring requirements under NEC 2011 requirements without acquisition of dedicated unit.