Viking Corp., The
Hastings, MI 49058 9706
Sep 29, 2005 Freedom® VK458 is 7.4 K factor residential pendent fire sprinkler designed to provide lowest starting pressures for NFPA 13 residential applications requiring 0.1 GPM/ft² density. Offered in brass, chrome, black, and white standard finishes, cULus-listed sprinkler may also be used in combination with smaller K factor sprinklers. It is available with surface-mounted, adjustable, and recessed escutcheons as well as recessed adjustments up to 5/8 in.

Ampacet Corp.
Tarrytown, NY 10591-5130
Sep 23, 2005 Suited for use in high- and low-density polyethylenes, AmpShield 1199 can be used at temperatures to 550°F in non-FDA extrusion processes and has minimal effect on resin tensile and elongation properties. Material imparts flame resistance to polyethylene matrix at addition rates as low as 12%, but 18-20% is recommended to ensure enough is present to prevent polymer ignition. Polyolefins with proper letdown ratio of this masterbatch achieve V-2 rating or better.

Viking Corp., The
Hastings, MI 49058 9706
Aug 26, 2005 Freedom® VK435 is 3.1 K factor sprinkler that provides flows down to 9 gpm at room sizes of 12 x 12 ft and 10 gpm in 14 x 14 ft rooms. Offered in brass, chrome, black, and white finishes, cULus-listed sprinkler delivers flows of 20 gpm or less when 2-head design is required. It is available with surface-mounted, adjustable, and recessed escutcheons with recessed adjustments up to 5/8 in.

System Sensor Europe Ltd.
East Sussex Horsham  United Kingdom
Aug 11, 2005 Used in intelligent fire systems, M210E-CZ conventional zone interface module enables zone of up to 32 conventional 2-wire detectors to be managed by control panel via single module address on one loop. It is compatible with existing intelligent control panels and can be mounted in stand-alone enclosure or on 35 mm DIN rail. Along with optional short-circuit isolation, product features tri-color LED status indicator and can be installed without loss of protection.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Aug 04, 2005 Certified for use in fire-protective signaling systems, lead (Pb)-free TSAL6100X01 has narrow angle of half-intensity of 10°, forward voltage of 1.35 V @ 100 mA, and typ radiant intensity of 130 mW/sr @ 100 mA. It is compatible with lead-free processing in accordance with WEEE and RoHS and suitable for high pulse-current operation. Unit may be used in other applications such as remote controls and those relying on UL 268-compliant IR emitters.

Tra-Con, Inc.
Bedford, MA 01730
Jul 26, 2005 High-viscosity TRA-BOND 216R01 exhibits lap shears of 3,600 psi with room temperature cure and 4,500 psi with 65°C heat cure. Product is tested and certified to requirements of UL94 V-O and is RoHS compliant.

International Safety Instruments, Inc.
Lawrenceville, GA 30043
Jul 18, 2005 ISI TEAMS Telemetry Electronic Air Management System individually and simultaneously monitors vital data of every firefighter at scene, providing incident commanders with real-time information on PASS status, ambient temperature, cylinder air, and time in fire. Self-monitoring system recognizes situations that need attention and automatically sounds 90 db alarm. Commanders can monitor status of up to 32 firefighters by name using chart on laptop computer screen.

Weinbrenner Shoe Co. Inc.
Merrill, WI 54452
Jun 21, 2005 Certified to both NFPA 1971 and NFPA 1992, Hellfire Structural/Haz-Mat Boot includes multiple layers of flame-suppressing materials. High temperature-resistant reflective patches on outside of boot minimize heat transference, while single-piece, closed-cell Neoprene sponge lining on inside provides comfort and insulation. Chemical resistance is provided by dipped neoprene synthetic latex outer layer, offering seamless, leak-proof, and puncture-resistant barrier.

Xtralis Inc.
Norwell, MA 02061
Jun 16, 2005 Providing early warning smoke detection for business-critical areas, VESDA LaserFOCUS VLF-500 is equipped with smoke level dial display that lets user obtain real-time smoke level information from safe distance. Instant Fault Finder(TM) facilitates identification of system issues, and Swift Start(TM) provides out-of-the-box installation routines. Other features include series of pre-engineered pipe network designs and Sonic Flow(TM) air flow monitoring capability.

Patterson Pump Co.
Toccoa, GA 30577 0790
Jun 15, 2005 Self-contained Pre-Pac®, pre-engineered to meet or exceed all applicable codes, requires contractors to hook-up unit to water and electricity at job site. Horizontal split case and vertical turbine models have discharge pressures of 40–390 psi and capacities of 150–4,500 gpm. Also available, vertical in-line and end suction models feature discharge pressures of 40–150 psi and capacities of 50–750 gpm.

Honeywell Fire Group, Fire Control Instruments (FCI)
Westwood, MA 02090
Jun 03, 2005 Suited for use in open areas with high ceilings, 4-wire System Sensor BEAM1224 Series is listed for operation from -22 to +131°F. Single-ended, reflective design allows for one-person installation, and alignment is accomplished using optical sight and 2-digit signal strength meter incorporated into product. Along with 4 standard sensitivity selections, series offers 2 Acclimate settings, combination transmitter/receiver unit, and reflector.

Fire Control Instruments, Inc.
Waltham, MA 02451 1122
May 19, 2005 Consisting of transmitter/receiver and reflector, System Sensor BEAM1224 Reflective Beam Detectors are capable of sensing smoke where spot-type detectors are difficult to install and maintain. They include 4 standard sensitivity selections and 2 acclimate settings. Listed for operation from -22 to 131°F, 4-wire units feature single-ended reflective design that allows for 1-person installation. Alignment is accomplished using optical sight and 2-digit signal strength meter.

Xtralis Inc.
Norwell, MA 02061
Apr 27, 2005 Compliant with BS8418 standard, ADPRO FastTrace multi-site video security system features zone isolation capability, PTZ presets, arming/disarming function, secure video transmission, and alarm verification. SitePulse feature works over existing IP lines to continuously watch alarm status. VESDA LaserFOCUS 500 provides smoke detection for business-critical spaces of less than 5,000 ft². Both products include 10MAX voice evacuation system controller.

NOTIFIER Fire Systems
Northford, CT 06472
Apr 21, 2005 Installed near building exits or along egress routes, ONYX® ExitPointâ„¢ acts as audible exit sign. Compact speaker produces broadband noise when triggered by building's fire alarm control panel, alerting building occupants to location of nearest exit using 4 field-selectable directional sound pulse patterns. Unable to be obscured by smoke, active warning system provides interactive guidance, generating noise at all frequencies across human hearing range.

Gamewell Co., The
Ashland, MA 01721
Mar 21, 2005 SmartScan is offered on company's IdentiFlex 600 Series fire control panels. It provides alarm verification per detector and is fully digital. Panel end-to-end response is reduced to less than 5 sec, and 198 devices per loop can be supported. Protocol enables loop distances up to 12,000 ft of twisted pair, parallel pair, THHN, and shielded wire types. One loop poll covers 10 devices.

Silent Knight
Maple Grove, MN 55369 4927
Dec 30, 2004 With support for up to 16 nodes, IFP-Net Fire System Manager provides PC-based system that captures and displays fire events and conditions throughout facility via graphical display interface. Compatible with intelligent analog/addressable fire control panels IFP-1000 and IFP-100, it allows users to auto-navigate and locate device related to alarm or event based on priority of event. All components can be backed-up and stored in history manager.

Honeywell Fire Group, Fire Control Instruments (FCI)
Westwood, MA 02090
Dec 17, 2004 Series ADP Low-Flow Photoelectronic Sensors detect smoke at air-speed velocities of 110–4,000 fpm, providing assistance in difficult smoke detection environments. Analog addressable units shut down fans, blowers, and air conditioning systems, preventing spread of toxic smoke and fire gases. Any sensitivity in sensors caused by dirt, temperature, or humidity is reported to panel, allowing compensation algorithms to maintain set sensitivity.

Siemens Building Technologies Inc.
Florham Park, NJ 07932
Dec 01, 2004 Agent Delivery Cylinder, Model FM-200R can provide 24 hr suppression protection for areas up to 40,000 cu-ft. During fire, system allows for maximum of 1,200 lb to be distributed through fixed piping network for protection of facility's most critical assets. Clean, colorless gas extinguishes fire in seconds and leaves no residue or damage.

NOTIFIER Fire Systems
Northford, CT 06472
Nov 17, 2004 Onyx Series includes Model 640 Fire Alarm Control Panel, ACPS Addressable Power Supply, XPIQ multi-channel audio transponder, RFX wireless detection systems, and Acclimateâ„¢ Plus detector. All have black patterned look, along with network, panel, and peripheral device designs. Units can be linked together to form integrated solutions for any life safety challenge.

Firetrace International
Scottsdale, AZ 85260
Nov 05, 2004 Fire suppression system provides fire protection at all major points of air flow inside fume cabinet. It features canister of fire suppression agent and flexible polymer detection tubing that can be routed anywhere inside cabinet. Upon exposure to 212°F flame, tubing ruptures and releases 1–50 lb of fire suppressant into fume hood. Self-contained system requires no electricity or external power, but can turn off power or signal alarm.