Safety & Protection Barriers
With end-to-end sensing design, EZ-SCREEN® Light Screen eliminates gaps in detection when mounted on top of machine work surfaces and between cascaded segments. Unit is available in 3 resolutions of 14, 23, and 40 mm and offers sensor lengths from 280–1,820 mm in 70 mm increments. Bi-color alignment indicators simplify setup, troubleshooting, and installation, while dual scan technology makes light screen immune to EMI, RFI, ambient light, weld flash, and strobe light. Read More
Adjust-to-fit design of Ladder Safety Gate protects elevated platforms, mezzanines, ladder ways, and other openings in railing system. Installed using ½ in. wrench, this OSHA- and ANSI-compliant, self-closing swing gate features reversible swing direction and mounts to standard pipe, angle iron, flat bar, or existing wall. Dual stainless steel springs are standard, and mounting hardware is provided for round pipe up to 2 in. OD and square tubing up to 1.5 x 1.5 in. OD.
Engineered for over 1 million life cycles in heavy-duty commercial traffic applications, Model CSL24VDC secures property and allows users to control and monitor property with smartphone. Power management technology extends backup battery life for more than 24 hours without recharging for maximum reliability. Read More
Made of carbon steel with safety yellow powder coat finish, Mezzanine Clear Height Safety Gate protects workers from falls on elevated mezzanine loading areas. Counterbalanced gates are located between employee and edge. As one gate opens, other closes to protect employees from falling. Unit accommodates handrails and meets/exceeds OSHA guidelines, and lack of load height restrictions accommodates tall pallets and enables passage of more material through mezzanine entryways.
By providing electrical barrier between control devices and equipment installed in hazardous (Class 1, Division 2) environments, fuse-protected ASD-NIB Series minimizes risk of ignition on load side. This enables standard wiring practices to be used for in-field connections and eliminates need for explosionproof enclosures/conduit. At 6.2 mm wide, this non-incendive, CCSAUS-approved barrier module connects single-channel analog or discrete signal wires from 24–12 AWG. Read More
Comprising cassette and 5 ft wide x 3 ft high (max) printed banner pulled down from horizontal bar, Q-Banners can help build brand awareness, convey specific messages, and integrate look of waiting lines into overall site theme. Cassette retrofits to any brand of retractable belt stanchions, allowing adopters to place advertising and branding messages in front of consumers waiting in line. Banner can be printed on one or both sides and are available in vinyl or mesh. Read More
Engineered to prevent employee injuries and deaths from falls through skylights, non-penetrating Skylight Defender meets and exceeds 200 lb national OSHA regulation as well as California OSHA mandates by withstanding and supporting at least 400 lb. System fastens onto skylight frame using compression system and requires no drilling. Constructed of welded galvanized mesh, Skylight Defender has wire screen thickness of ¼ in. for complete skylight protection. Read More
Suitable for police departments, fire departments, and security personnel, Retracta-Cade Barrier can adjust to lengths of 4–10 ft, and when retracted, can fit in patrol vehicle trunk. Unit features 4 ft horizontal bar with adjustable 3 ft extension panels on each side, and legs that deploy and lock into place, creating 41 in. high barrier. Made of rust-proof anodized aluminum and impact-resistant plastic, each barricade weighs just 37 lb and can be carried by one person. Read More
Created for indoor installations, Model WMD-06 manages pedestrian flows at entrance points of various buildings and facilities. Unit is available with standard 650 mm panel or 900 mm extended panel. Gate can be operated autonomously with remote control panel or wireless remote control device as well as from access control system. Two-way controlled, with throughput capacity of 12 persons, gate may be mechanically unlocked with mechanical release key. Read More
Constructed of carbon steel with safety yellow powder coat finish, OSHA-compliant Dock Gate provides fall protection from loading docks. Custom gas struts facilitate gate operation and allow one-handed opening and closing. Struts hold gate open to prevent it from falling on workers as during deliveries and shipments. Available in two models, gate comes in 8 and 10 ft widths. Read More
Part of Objects at Heights Collection, Squids® Drops Zone Tape features repeating CAUTION: DROPS ZONE message to prevent workers or bystanders from entering potentially dangerous areas where dropped objects are a risk. Tape is also suitable for areas with Foreign Material Exclusion or Foreign Object Debris/Damage risks. Measuring 3 in. wide and available in 300 ft and 1,000 ft rolls, tape is orange with black text and is 4 mil thick for strength. Read More
Available for RailEasy™ and HandiSwage™ cable railing systems, flush fittings are completely concealed inside post and suit applications where through-post look is desired. Measuring under 1½ in. long, fittings lend to clean appearance, and cable passing through fitting accelerates installation. RailEasy™ Flush Fitting accepts 5/32 in. cable, while HandiSwage™ utilizes 1/8 in. cable. Both fittings are made from 316L stainless steel and feature mechanical swage fitting. Read More
While allowing use of overhead cranes or lifts, Protect-O-Gate Clear-Height Mezzanine Safety Gate provides dual-gate fall protection for pallet-drop areas without limiting height of load being passed. Dual-gate system meets ANSI standard (MH 28.3-2009) for constant fall protection in loading and unloading areas, and design can be customized to fit varying widths and depths. Available with or without third rail and toe kicks, system features heavy-duty carbon or stainless steel construction. Read More
Bumble-Bee® is available as powder coated steel system with black fittings and yellow pipe as well as mill finished aluminum version. With no welding required, system installs in as little as 15 min. Standard kit configurations include straight stand-alone sections of 4, 6, and 8 ft; corner section; and extension kits of 4, 6, and 8 ft. Each kit comes with pipe cut to size, fittings, installation instructions, hex key, base flanges, and test results showing OSHA compliance.
Designed for mezzanine and platform material handling, Pallet Safety Gates allow access to elevated areas while protecting personnel. Units come in 6 galvanized or powder coated models that cover unprotected openings from 44–79 in. Specialized clamp-on and bolt-on models feature impact-resistant bumpers to protect materials being transported by forklift from damage. Read More
Suited for those who work in corrections, law enforcement, and security, MT-PRO™ fits in ballistic models such as DeLuxe, Patrol, and Leopard and integrates Dyneema® fabrics from DSM along with TitanSkin™ anti-stab technology. Panel meets standards of NIJ Level IIIA and offers bullet stopping capabilities that have been tested against 8 different types of ammunition. Product is certified to stop HOSDB P1 Blade at 15 J (<20 mm) and hypodermic needle at 5 J according to VPAM KDIW 2004. Read More
Leveraging multi-technology approach, CAP-4-US permanent electrical safety device (PESD) enables electricians to find failure points in critical electrical assets, such as transformers and switchgear, before failure can occur. Solution is available with transparent or opaque polymer, both of which comply with all mandatory impact, load, and flammability requirements. This industrial-grade IR window meets OSHA NFPA 70E requirements for arc flash safety. Read More
Suitable for indoors or out in residential or commercial applications, Cable-Rail includes choice of 1/8 , 3/16, or ¼ in. diameter, weather-impervious Type 316 stainless steel cable. When used in conjunction with automatic locking, stainless quick-connect fittings and peripheral hardware, cable can be horizontally threaded and properly tensioned through holes of prefabricated floor and fascia mounted posts, or utilized with other brands or formats of wood, aluminum, or steel railing frames. Read More
Counter-balanced and operator-friendly, Protect-O-Gate Pivot Gate offers access to staging area while eliminating potential for falls and other accidents associated with mezzanine loading area. When enclosure closest to edge of mezzanine is lifted to allow load delivery, second enclosure is resting on mezzanine, blocking personnel from falls. Custom sizing can be accommodated with optional increased load height available to 80 in. Read More
Offered in motor-driven and manual versions, Quadro turnstiles are available for RoundTrack 40 system. Each turntable has 10 ton payload, allowing up to 40 tons to be transported via crossing. Rotating mechanism for changing travel direction consists of 4 small turntables, installed in floor, that are combined with rotating wheel sets on trolley. Changes of direction are effected via either drive in trolley or pneumatically at turnstile. Optional pivoting transport drive is available. Read More