Barriers & Guards

Safety & Security Equipment

Safety Gate complies with OSHA and ANSI standards.

August 20, 2015

Adjust-to-fit design of Ladder Safety Gate protects elevated platforms, mezzanines, ladder ways, and other openings in railing system. Installed using ½ in. wrench, this OSHA- and ANSI-compliant, self-closing swing gate features reversible swing direction and mounts to standard pipe, angle iron, flat bar, or existing wall. Dual stainless steel springs are standard, and mounting hardware is provided for round pipe up to 2 in. OD and square tubing up to 1.5 x 1.5 in. OD.
Read More

Architectural and Civil Engineering Products, Safety & Security Equipment, Controls & Controllers

Security Slide Gate Operator suits high traffic applications.

August 7, 2015

Engineered for over 1 million life cycles in heavy-duty commercial traffic applications, Model CSL24VDC secures property and allows users to control and monitor property with smartphone. Power management technology extends backup battery life for more than 24 hours without recharging for maximum reliability. Read More

Architectural and Civil Engineering Products, Safety & Security Equipment, Materials & Material Processing

Linear Absorbers reduce sound reverberation.

July 27, 2015

Constructed of willtec® foam, SONEX® Linear Absorbers are straight-line baffles that provide optimal sound control and streamlined appearance. Class 1 fire-rated products come in lengths up to 96 in., depths from 6–24 in., and set thickness of 2.03 in. Baffles slip fit into 2 in. wide channel trim typically fastened in-place to wall or ceiling substrates. Offered in natural white or light grey willtec and HPC color coatings, absorbers are suited for new and renovated spaces. Read More

Safety & Security Equipment, Architectural and Civil Engineering Products

Stationary Acoustic Louver is Miami-Dade qualified.

July 16, 2015

Featuring 6 in. deep J blade, Model AFJ-601D is designed to restrict transmission of high and low frequency sounds generated by mechanical equipment and to act as exterior weather louver. Unit is Florida Building Code approved and Miami-Dade qualified for use in Wind-Borne Debris Zone as well as AMCA Licensed for Water Penetration, Sound and Air Performance. Louver can be specified with variety of options in broad array of architectural finishes. Read More

Safety & Security Equipment

Safety Gate provides fall protection for workers on mezzanines.

June 25, 2015

Made of carbon steel with safety yellow powder coat finish, Mezzanine Clear Height Safety Gate protects workers from falls on elevated mezzanine loading areas. Counterbalanced gates are located between employee and edge. As one gate opens, other closes to protect employees from falling. Unit accommodates handrails and meets/exceeds OSHA guidelines, and lack of load height restrictions accommodates tall pallets and enables passage of more material through mezzanine entryways.
Read More

Safety & Security Equipment, Welding Equipment & Supplies, Non-Industrial Products

Hot Work Pad features modular, customizable construction.

June 24, 2015

Composed of fiberglass insulation mat between 2 layers of fiberglass fabric that is coated with specially formulated black silicone compound, 3-in-1 Fire Quilt™ can be used as FM-Approved curtain, blanket, or pad when welding, grinding, or brazing. Each 4 x 4 ft pad comes with grommets on one side for hanging for vertical work. Reusable and transportable, product repels water, grease, and dirt and is approved for all hot work in accordance with NFPA 51B requirements. Read More

Safety & Security Equipment

Faceshield provides arc flash head protection.

June 22, 2015

Featuring high visible light transmission and attached see-through chin cup for optimal peripheral vision, ArcGuard® Faceshield comes in 12 cal and 20 cal options (HRC 2) with adjustable settings that allow it to be locked in various positions. Product fits multiple hard hats including standard, slotted, and full brim. Faceshield meets both OSHA 1910.269 and ASTM F2128 standards and is compliant with NFPA 70E-2015 and CSA Z462-15 (Canada). Read More

Mounting & Attaching Products, Safety & Security Equipment

Shock Absorption Mounts feature conical shape.

June 1, 2015

Available in inch sizes, GN 453.1/GN 453.2 Vibration/Shock Absorption Mounts are frequently used as end-stop bumpers. Absorbing most accumulated kinetic energy on impact, mounts act as dampers and prevent damaging shock and rebound. They can also be used as sound dampers or leveling feet. Featuring parabolic shape, mounts have 55 durometer vulcanized rubber body and molded-in stainless steel cover plate. Versions with either tapped inserts or threaded studs are offered. Read More

Architectural and Civil Engineering Products, Safety & Security Equipment, Electrical Equipment & Systems

Pre-Fab Wall Panels provide radiation shielding.

May 19, 2015

Available in standard size of 4 x 8 ft, Pre-fab Lead Lined Wall Panels offer alternative to using construction materials inside walls for radiation shielding. Panels can be attached to existing walls and can be rearranged or taken away at any time. Supplied in variety of thicknesses, panels have solid steel frame, are beige in color, and use standard mounting hardware. Additional color options are available. Read More

Electrical Equipment & Systems, Electronic Components & Devices, Safety & Security Equipment, Mounting & Attaching Products

Non-Incendive Barrier Module isolates analog and discrete signals.

March 16, 2015

By providing electrical barrier between control devices and equipment installed in hazardous (Class 1, Division 2) environments, fuse-protected ASD-NIB Series minimizes risk of ignition on load side. This enables standard wiring practices to be used for in-field connections and eliminates need for explosionproof enclosures/conduit. At 6.2 mm wide, this non-incendive, CCSAUS-approved barrier module connects single-channel analog or discrete signal wires from 24–12 AWG. Read More

Safety & Security Equipment

Sound Absorbing Acoustic Ceiling Panels feature 0.95 NRC.

February 26, 2015

With Noise Reduction Coefficient (NRC) up to 0.95 and Articulation Class (AC) rating of 190, Rockfon® Sonar™ stone wool ceiling panels improve acoustics in open-plan offices and other commercial interiors while also supporting speech privacy. White surface delivers 0.85 LR (light reflectance), and product exhibits dimensional stability at up to 100% RH. At 1 in. thick, panels install in 9/16 and 15/16 in. ceiling suspension systems or can be directly applied to sound-reflecting surface. Read More

Safety & Security Equipment

Moisture Barrier suits resilient flooring installations.

February 24, 2015

With DriTac Eco-DriBloc Premium Green Moisture Control and Adhesive Isolation Membrane, installers can apply moisture mitigation system and install resilient floor on same day with only 3-hr dry time. Single-component, roller-applied, 2-in-1 product offers zero VOC, zero solvent, and low odor formula that also serves to isolate old adhesive residue, including cutback. Eco-DriBloc is warranted for up to 15 lb of concrete moisture vapor transmission and up to 90% RH. Read More

Safety & Security Equipment, Non-Industrial Products, Labels, Tags, Signage & Equipment

Retractable Banners turn stanchion-based lines into display space.

February 24, 2015

Comprising cassette and 5 ft wide x 3 ft high (max) printed banner pulled down from horizontal bar, Q-Banners can help build brand awareness, convey specific messages, and integrate look of waiting lines into overall site theme. Cassette retrofits to any brand of retractable belt stanchions, allowing adopters to place advertising and branding messages in front of consumers waiting in line. Banner can be printed on one or both sides and are available in vinyl or mesh. Read More

Safety & Security Equipment, Materials & Material Processing

PVDC-Coated Film targets resealable food packaging applications.

January 16, 2015

By providing barrier against moisture, optiFLEX® RESEAL™ BARRIER Clear helps preserve food freshness as well as wet wipe product moistness. Polypropylene imparts tear resistance and durability for repeated opening/reclosure of flexible packaging substrates, while film conformability maximizes label and graphic coverage. Specifically, product consists of 2 mil clear PVDC-coated flexible BOPP film with resealable pressure-sensitive acrylic adhesive and TRACrite™ 120 polyester release liner. Read More

Safety & Security Equipment, Non-Industrial Products

Battery-Operated Heated Jacket protects workers in cold climates.

January 5, 2015

CORE Performance Work Wear® Outer Layer Series includes 6490 Heated Jacket with Removable Sleeves. Offering low, medium, and high heat settings as well as 2 heat zones on chest and back, battery-powered jacket has fleece lining, can be converted into vest, and offers adapter extension wire to connect to such alternative power sources as tool batteries. Outer shell is resistant to water and wind, and heating zones are activated via touch heat control button on jacket exterior. Read More

Safety & Security Equipment, Architectural and Civil Engineering Products

Fall Protection System helps prevent skylight accidents.

December 23, 2014

Engineered to prevent employee injuries and deaths from falls through skylights, non-penetrating Skylight Defender meets and exceeds 200 lb national OSHA regulation as well as California OSHA mandates by withstanding and supporting at least 400 lb. System fastens onto skylight frame using compression system and requires no drilling. Constructed of welded galvanized mesh, Skylight Defender has wire screen thickness of ¼ in. for complete skylight protection. Read More

Safety & Security Equipment, Transportation Industry Products

Reflective Insulation stops 97% of radiant heat.

December 19, 2014

Available in lengths of 25 and 50 ft and widths of 16, 24, and 48 in., ESP Low-E Simple Solution Rolls can be custom-designed for garage doors, pipes, and water heater wrap applications. Reflective insulation is created by heat-bonding pure aluminum facing to one or both sides of closed cell non-toxic polyethylene foam, making it resistant to heat, sound, and moisture transfer. Product is non-toxic, Class 1, and Class A fire rated. Read More

Safety & Security Equipment

Crowd Control Barrier adjusts from 4-10 ft long.

December 16, 2014

Suitable for police departments, fire departments, and security personnel, Retracta-Cade Barrier can adjust to lengths of 4–10 ft, and when retracted, can fit in patrol vehicle trunk. Unit features 4 ft horizontal bar with adjustable 3 ft extension panels on each side, and legs that deploy and lock into place, creating 41 in. high barrier. Made of rust-proof anodized aluminum and impact-resistant plastic, each barricade weighs just 37 lb and can be carried by one person. Read More

Safety & Security Equipment, Adhesives & Sealants, Materials & Material Processing

Solvent Barrier suits blow molded containers up to 30 L.

December 2, 2014

Providing effective barrier against solvent-based products, RPC Protect® offers safe transport solution for wide range of chemical, agrochemical, and fuel products. It is also approved for food use. Barrier does not affect performance of containers in any way, maintaining shock-resistant properties and passing all requirements of drop, pressure, and stacking tests. With mono-material construction, containers incorporating RPC Protect® can be recycled. Read More

Safety & Security Equipment

Blade Guard Accessory helps improve slitting safety.

November 20, 2014

Available as standard with Class I, Class II, and Class III Tidland e-Knifeholders or as retrofit for Tidland Performance Series Knifeholders, Tidland 360 Degree Blade Guard provides operators with full protection from sharp, exposed blades during setup and changeover. Read More