NOTIFIER Fire Systems
Northford, CT 06472
Sep 28, 2004 With capacity of up to 198 addressable NOTIFIER devices, intelligent FireWarden 100â„¢ features smoke detection capabilities and auto-programming. Single-loop panel suits applications that require flexibility of individual software zone mapping. Auto detector testing, drift compensation, maintenance alert, and auto device type verification offer maintenance and troubleshooting capabilities. Unit also includes remote upload/download communicator.

Fire-Lite Alarms
Northford, CT 06472 1653
Aug 19, 2004 Featuring surface-mount technology, Model MS-9200UD includes automatic detector test capability, drift compensation, and maintenance alert. Built-in communicator is compatible with 14 different formats, including Ademco Contact ID, allowing reporting of addressable point or software zone status without optional Digital Alarm Communication Transmitter. Additional features include remote site upload/download capability and selectable strobe synchronization.

Silent Knight
Maple Grove, MN 55369 4927
Jun 15, 2004 IntelliKnight 5808 FACP offers built-in digital communication that allows reporting of all system activity to remote monitoring location. Unit supports up to 127 addressable devices that allow user to pin-point device that has been activated and/or needs attention. Drift compensation, maintenance alert, and distributed power scheme simplify installation and reduce wiring requirements. Built-in RS-232 interface for programming to PC is also available.

Fire Control Instruments, Inc.
Waltham, MA 02451 1122
Jun 03, 2004 NetSOLO® Broadband delivers full-network control and communications, digital messaging, live voice instructions, and fire fighter telephone communications through distributed network fire alarm system, all on single pair of wires. It incorporates existing 7100 panels and can be expanded to meet growing application demands. System uses Boolean logic programming and Digital Signal Processor.

Fire-Lite Alarms
Northford, CT 06472 1653
May 21, 2004 Manufactured with SMT, MS-9600 V2 addressable fire alarm control panel is offered with Digital Alarm Communicator Transmitter option that provides remote site upload/download and remote monitoring capabilities. It also lets technicians diagnose system problems remotely. Features include 14.4 kbaud modem, 2 Notification Appliance Circuits, and fire protection technologies such as Maintenance Alert, Automatic Detector Test, and Sensitivity Printout.

Silent Knight
Maple Grove, MN 55369 4927
May 17, 2004 Intelliknight® 5820XL Fire Alarm Control Panel features built-in digital communicator, digital communication protocol that uses standard wiring, and integrated dead-front cabinet. It performs drift compensation and automatic NFPA 72-compliant sensitivity check. Using 6 A 24 Vdc power supply, it offers programming capability from on-board user interface or SKSS PC-based programming software. Unit supports 127 addressable points, expandable to 508.

Siemens Building Technologies Inc.
Florham Park, NJ 07932
Mar 18, 2004 Single-loop Model FS-250 supports up to 252 addressable inputs and 252 signal/relay outputs. Device is polarity insensitive and can operate on standard wire with no special twist or shield required. Panel is programmable from front keypad or through Windows-based PC programming software. Device programmer/tester can be utilized to test addressable loop wiring for shorts and grounds as well as device operation.

Gamewell Co., The
Ashland, MA 01721
Feb 17, 2004 SmartViewâ„¢ is for use with Series 600 addressable fire alarm control panels. It presents information through graphical menu system and color display while operating over high-speed Ethernet LAN/WAN or single-user network. Each alarm or supervisory event is displayed on color-coded display or with floor plan pinpointing alarm location and point-specific information. User actions and events are logged and recorded for creation of customized reports.

Comtech Telecommunications Corp.
Melville, NY 11747 3833
Nov 28, 2003 Model 10 fire station alerting system integrates with existing station P.A. and lighting systems, enabling company-based selective alerting in addition to whole-station alerting. It controls which alerts are routed to specific dorm rooms, overcoming problems associated with all station personnel being alerted to every call throughout day and night. System integrates with CAD, radio, and wireline inputs and allows for customization based on individual station needs.

Silent Knight
Maple Grove, MN 55369 4927
Oct 31, 2003 Six-zone Model 5104 provides digital fire reporting over telephone lines. It can be used as stand-alone system or incorporated into existing system. As stand-alone unit, it monitors sprinkler systems for waterflow, supervisory, and gate valve tamper conditions. Unit offers fuseless overload protection with automatic reset circuitry and fault indicator. Dual phone line interface automatically self-tests every 24 hr with report sent to central station.

Gamewell Co., The
Ashland, MA 01721
Oct 20, 2003 IdentiFlexâ„¢ 602 analog addressable, fire alarm control panel uses SmartLinkâ„¢ peer-to-peer protocol to connect up to 250 network nodes. SmartStart® self-programming automatically identifies and configures all system modules, circuits, and devices to default alarm mode. XP95 digital communications protocol allows set-up and compatibility with any type of wiring. Fully-digital single or dual SLCs support up to 126 analog points each for event reporting.

Simplex
Westminster, MA 01441
Jul 17, 2003 Simplex® 4004R Suppression Releasing Panel suppresses fires in computer rooms, petrochemical and power plants, and high-risk locations. Product controls release of extinguishing systems such as Inergen®, FM-200, preaction, water spray deluge, and carbon dioxide. Capable of handling one or two hazard areas, product also provides emergency notification using horns or strobes. Panel can capture detailed history of all trouble, alarm, and releasing events.

Crowcon Detection Instruments
Milford, OH 45150
May 02, 2003 Gasmonitor Plus modular control system for remote fire and gas detectors use 19 in. rack enclosures that hold 16 cards. Each channel has removable control card. LED bar graphs on cards show gas level or fire status of detectors. Cards have fault warnings, and alarm inhibitors that allow uninterrupted operation of remaining channels during maintenance checks. Each channel has 4-20 mA analog output. Up to 84 output relays are provided by each rack.

Siemens Building Technologies Ltd.
Sudbury, ON P3A 2A3  Canada
Feb 13, 2003 FireFinder incorporates audio system with 8-channel digital voice amplifiers that operate in 200 Hz to 12 KHz range. System is used for voice/evacuation emergency notifications and can also provide building-wide communication with surround-sound music and paging. Its 6 in. interface screen simultaneously displays up to 5 events using HAZMAT icons for safety and highlighting critical information. Interface also displays locator maps.

Siemens Building Technologies Inc.
Florham Park, NJ 07932
Jan 28, 2003 Model S-HPMG-MCS, with integrated multi-candela strobe light on metal grill, produces sound level of 77.1 dB with 1/16 W. Strobe operates on Xenon flashtube and offers field-selectable candela values, including 15/75, 30/75, 75, and 110. Field-selectable audio power taps range from 1/16 to 4 W, with frequency range of 400–4,000 Hz. Available for wall or ceiling mounting, speaker is UL 1480 and 1971 listed, CSFM and MEA approved, and complies with ADA, NFPA and ANSI guidelines.

Edwards Signaling & Security Systems
Plainville, CT 06062
Oct 25, 2002 FireShield® consists of 3, 5, and 10 zone fire alarm control panels, integrated DACT/Dialer, serial annunciator modules, and serial remote relay modules. It features front panel programming, 1 person walk testing, and selectable IDC and NAC styles. Each IDC can be programmed for 1 of 8 types including waterflow and supervisory. Genesis® strobes are compact visible emergency devices, and SC Series detectors provide early warning of fast or slow burning fires.

Simplex
Westminster, MA 01441
May 06, 2002 SafeLINC(R) Internet-based communications link lets facility managers and building owners use web browser to monitor status of their fire alarm system from off-site locations. It allows authorized users to access fire alarm system information from PC, laptop, personal digital assistant, or pager. In event of alarm or trouble condition, link automatically sends email to designated staff informing them of situation. Module mounts to fire alarm control panel.