Rockford Systems, Inc.
Rockford, IL 61109 2695
Sep 28, 2009 OSHA and ANSI compliant SSC-3000 solid-state press automation control system is available for part-revolution-clutch mechanical power presses. Rack-mounted modular control system comes with expandable options, allowing changes to be made, or features to be added or deleted as press requirements change. It includes power supply module and main CPU card, and is designed to hold 8 additional cards for expandable options.

TimeSight Systems Inc.
Mt. Laurel, NJ 08054
Sep 28, 2009 Enabled by Intel® Xeon® processor 5500 series microarchitecture, TimeSight Video Surveillance Appliances for intelligent Network Video Recorders are each capable of supporting hundreds of high-resolution VGA cameras. Automated Video Lifecycle Management capability reduces size of stored video over time, according to business rules, as video ages and becomes less relevant. Motion Optimized Recording applies specific resolution, frame rate, and retention policies to motion and non-motion video.

Melfabco, Inc.
Englewood, NJ 07631
Sep 22, 2009 Tiara Panels enhance acoustical quality of venues such as cinema exhibition, concert hall, and conference centers. Absorption coefficients, measured in Sabins/ft², range from 0.33 at 100 Hz to 1.10 at 5,000 Hz. Manufactured using 50% recycled content, panels have Sound Absorption Average (SAA) rating of 1.14. Product helps avoid speech privacy problems in conference centers while providing clients with confidence that confidential conversations will not be overheard.

Seton Identification Products
Branford, CT 06405 0819
Sep 21, 2009 Suited for factories, offices, and schools, Influenza Protection Kits meet basic precautionary steps advised by government and health officials to avoid spread of H1N1 and other influenza germs. Daily Influenza Protection Kit contains N95 mask, vinyl gloves, antimicrobial hand wipes, and infectious waste bag, while Deluxe Multi-Day Influenza Protection Kit contains 2 N95 masks, 4 face masks, 4 vinyl gloves, 1 hand sanitizer, 15 antimicrobial hand wipes, packet of tissues, and 4 thermometers.

Capital Safety
Red Wing, MN 55066-5005
Sep 16, 2009 Saflok® Toggle Anchor can serve as tie-off point for fall arrest, fall restraint, or work positioning equipment or for personnel riding systems in horizontal/vertical/overhead applications. Once inserted through pre-drilled 0.75 in. mounting hole, SS toggle bar rotates perpendicular to hole, securing 5,000 lb breaking strength at anchor point. Used with concrete, precast concrete, and steel flange applications, anchor supports weight up to 310 lb.

Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)
Buffalo, NY 14206-2665
Sep 15, 2009 Designed for standing seam metal roofs, KEEGUARD Lite provides safe working environment for anybody required to access roof area to perform installation, maintenance, or repair. It is supplied in prefabricated kit form with aluminum uprights, rails, base plate, and fittings as well as stainless steel clamps and grub screws. Via 2 part clamps that fix over standing seam profile, standing seam guardrail system does not penetrate roof fabric while meeting standards of EN ISO14122 pt3.

Avineon, Inc.
Alexandria, VA 22311
Sep 15, 2009 Avineonics v2.0 enables organizations to integrate emergency preparedness with daily operations and create efficient incident management processes. It includes features for measuring emergency preparedness, managing incidents as they occur, and producing after action reports. It also enables damage assessment, resource planning, transfer of command, and demobilization, and supports integration with GISs to map resources and events during incident.

BioDefense Corporation
Boston, MA 02210
Sep 15, 2009 Combining ultraviolet, microwave, and high frequency energy, Mail Defender III kills anthrax, smallpox, SARS, avian flu, and many other dangerous substances. Microporous insulation systems minimize all modes of heat transfer simultaneously so mail is not damaged. System offers solution to Homeland Security Presidential Directive mandating that all federal buildings start complying on August 25, 2009 with plans to protect all occupants from bioterrorism attacks.

3M Co.
Springfield, MO 65802
Sep 10, 2009 Developed specifically to address issue of comfort, cup-shaped 3M 8300 Series features m-shaped nose clip, soft cushioned inner lining, and soft waffle edge. 3M Advanced Electret filter materials help users breathe easily, while color-coded braided headbands enable protection level identification. Incorporated into certain models, 3M Cool Flow Valve minimizes heat and moisture build-up, making respirators comfortable even in hot and humid conditions.

Bradley Corp.
Menomonee Falls, WI 53051
Sep 07, 2009 Equipped with 100% vacuum-formed fiberglass surround construction, enclosed safety shower features SpinTec(TM) drench shower head that delivers uniform 23 gpm flow, providing quick wash-down in emergency situations. Shower's exterior features UV inhibitor gel-coat, while its combination eye wash and drench shower come with scald- and freeze-protection valve, resisting freezing up to -58°F. When anchored, enclosure offers seismic 4 earthquake rating and wind-load capability up to 150 mph.

DMP
Springfield, MO 65803
Sep 03, 2009 Compatible with all DMP burglary panels and 1100 Series receivers, Model 1119 Wireless Sounder provides audible tone while sending signal to panel, and can be used as alternative to crash bars in retail/commercial applications. Single-zone module is equipped with long-life battery-powered sounder. Unit can also be used to augment keypad chime with additional annunciation that can provide notification of side or back door openings.

Bel-Art Products
Pequannock, NJ 07440 1920
Sep 01, 2009 Available in Red, Lime Green, and Sky Blue colors, Hot Hand® Protector lets wearers handle objects such as beakers, flasks, and bottles at extreme hot or cold temperatures. Silicone rubber product, which measures 3 7/8 x 7½ in., has quick fit pockets at each end - one for thumb and one for other fingers - and concave tipped studs on surface that provide secure grip. Mitt can withstand temperatures up to 500°F and remains flexible at temperatures down to -70°F.

Viking Corp., The
Hastings, MI 49058 9706
Aug 31, 2009 Along with 165°F temperature rating and 4.9 K factor, Model VK476 pendent sprinkler is cULus listed for up to 20 x 20 ft rooms. Hydraulically-efficient unit is available in 3 standard finishes - white, black, and wood beam finish, and includes slip-on outer ring for up to 5/8 in. of vertical adjustment. It can be used with sloped ceilings with 4/12 pitch, and to protect ceilings with beams up to 10 in. in depth, with sprinkler installed on underside of beam.

Sto Corp.
Atlanta, GA 30331
Aug 28, 2009 Suited for rough openings and transition detailing in above grade wall construction, StoGuard RapidSeal(TM) eliminates mesh, fabric, and tapes when used with StoGuard coatings. One-component air barrier and waterproof material installs down to 33°F, cures in wet weather, and adheres to damp substrates without blistering or increase in drying time. Product is compliant with all national, state, and local VOC regulatory requirements, and qualifies for LEED credits.

Capital Safety
Red Wing, MN 55066-5005
Aug 26, 2009 Designed to be inserted into pre-drilled 19 mm hole in cured concrete, Saflok® Concrete Wedge Anchor provides 22 kN fall arrest-rated anchor point for personal fall arrest system, work positioning system, or rescue system. Easy grip trigger and quick-release plug provide immediate anchor removal. Constructed from non-corrosive materials, reusable anchor includes swiveling forged connection ring that provides tie-off point for fall arrest system.

Pregis Corp.
Deerfield, IL 60015
Aug 26, 2009 Offering 2-step lamination technology, PolyPlank® Plus is suited for any item with painted or non-painted surface that needs to be protected during shipment. Protective foam plank can have outer layer made from various substrates, including foil, paper, air cushioning, nonwovens, scrims, adhesive, and cohesive films. Substrate is laminated onto closed-cell polyethylene foam sheet, which is then laminated to thicker single- or multi-layer plank structure.

American Casting & Manufacturing Corp.
Plainview, NY 11803
Aug 24, 2009 Designed for use with wire, self-locking Model PSW97 is supplied with lettering and numbering and is suited for meters, tanks, drums, containers, and every sealing application. Unit is made of styrene or acetyl plastic with stainless steel locking plunger. Available with cut wires or spools of wire, Model PSW97 offers environmentally safe alternative to lead seals.

Gateway Safety, Inc.
Cleveland, OH 44131 1045
Aug 20, 2009 Designed to meet/exceed ANSI Z87.1+ standards, Luminary(TM) safety eyewear product offers look, fit, and comfort features designed to promote worker compliance rates. Soft, flexible temples relieve pressure behind ears, and fingertip nosepiece reduces slippage. Weight is 4/5 oz, and one-piece polycarbonate lens with integrated brow guard and protective wrap-around design provides coverage against workplace hazards. Anti-scratch lens coating is standard.

Garlock Equipment Co.
Minneapolis, MN 55447 4721
Aug 19, 2009 Set-up within minutes, LadderGuard(TM) creates OSHA-compliant egress and ingress control zone for permanently-mounted rooftop ladders. Modular design works on parapet walls and flat roofs with round or flat ladder rails. As system attaches to existing ladder, no holes in roof are required. Hex-head and box wrench comprise all tools necessary for installation. Options include self-closing gate and custom colors.

Banner Engineering Corp.
Minneapolis, MN 55441
Aug 19, 2009 Offering response time as fast as 8 ms, low-profile EZ-SCREEN® LP provides 14 or 25 mm resolution, defined areas from 270-1,810 mm, and detection ranges up to 7 m. First and last beams of unit are positioned at ends of light screen, delivering continuous detection along entire length and eliminating dead zones. Interconnection of cascade sensors has been optimized, allowing up to 4 sensor pairs and Emergency Stop or interlocking guard switches to be connected at end sensor.