AGI - American Grippers Inc.
Trumbull, CT 06611
Jun 26, 2009 Offering gripping forces from 20-200 lb, 3-jaw Models AGA-23, AGA-33, AGA-43, and AGA-53 feature stroke-limiting screws to adjust stroke from 0-180°. When jaws are completely opened, work piece can be placed in fixture without having to retract gripper. Toggle mechanism increases in power as jaws near fully closed position and become self-locking when past parallel. All units are double acting with multiple air ports and mounting locations.

AGI - American Grippers Inc.
Trumbull, CT 06611
Jun 24, 2009 Combining zero-backlash rotary actuator, manifold, and parallel gripper, AGM Swivel/Gripper Modules provide solution for pick-and-place applications. Internal porting prevents airlines from twisting, rubbing, and snagging outside unit. With gripper stroke length of .25 in., smallest module in series can generate up to 5 lb-in. torque at 80 psi and up to 20 lb gripping force. Largest module has ratings of 250 lb-in. torque, 130 lb gripping force, and 4 in. stroke.

Atmel Corp.
San Jose, CA 95131
Jun 23, 2009 Clocked at 266 MHz with bus frequency of 133 MHz, SAM9G10 consuming no more than 100 mW in full power mode and includes provision for Schmitt Trigger inputs on all I/O lines. This ARM926EJ-S-based embedded microprocessor, along with RGB565-compliant LCD controller, has 3.6 V-rated supply voltage range on all PIO lines multiplexed with External Bus Interface (EBI). MPU comes in 217-pin, 0.8 mm ball pitch BGA package and has Multimedia Card Interface that supports SDIO Cards.

Accura Technics LLC
Keene, NH 03431
May 12, 2009 Designed for use with small to mid sized CNC mills, lathes, and grinding machines, Minuteman XA add-on robotic automation system can be specified with Fanuc articulated robotic arm or gantry style automation. It facilitates real time changeover by using pre tooled/set-up kits for repeat jobs, and also allows for unattended night time operation. Options are available for different material loading, such as bowl feeders, conveyors, trays, or combinations of these.

SAS Automation, Ltd.
Xenia, OH 45385
May 08, 2009 Featuring lightweight aluminum frame construction, Bag Gripper is used to palletize woven plastic or paper bags containing products including grain, chemicals, dog food, minerals, and plastic resins. It uses stainless steel fingers with customized finger pitch to match roller conveyor. Over-center linkage design keeps fingers shut in case of pneumatic or electric loss ensuring that bag is not dropped. Optional pallet hooks and slip sheet vacuum cups are also available.

Balluff, Inc.
Florence, KY 41042-0937
May 08, 2009 Available for RTU and track or gantry robots, BZL Robot Zone Limit Systems provide diverse, complementary, and redundant position monitoring for up to 3 robot axes to help recapture lost productivity. Systems offer flexibility to adjust zone angles and locations while providing means to mute personnel sensing devices per requirements of ANSI/RIA R15.06-1999. Pre-engineered kits include all mounting hardware, complementary cams, and multiple position switch in mechanical or inductive versions.

FIPA, Inc.
Atlanta, GA 30318
May 01, 2009 Equipped with 2 large pneumatic plungers, Model GR04.130F grips die-cast parts in injection molding industry. Inductive sensor provides feedback signal for process safety. With cogged surface of gripper jaws and retention force of 95 N, gripper provides secure hold on any workpiece, eliminating slippage. Wear resistance is ensured by hard-coated surfaces of gripper and gripper jaws.

Rixan Associates, Inc.
Dayton, OH 45459
Apr 15, 2009 Offering repeatable positioning for automated operations, swivel stand systems RSS-1000 and RSS-2000 allow robot to swivel out of way for access during set-up or maintenance. Mounting pattern can be set to custom specifications with various heights and arm lengths available. Featuring gear clamp for fast release, RSS-2000 will index every 3° over entire 360° rotation.

Schunk
Morrisville, NC 27560
Apr 03, 2009 Providing 3 linear axes, backlash-free UNIPLACE 2300 contains drive and control unit as well as media feed-through, which can be used to feed air, or for forwarding electrical signals. System allows working area up to 1,000 x 400 x 240 mm to be covered, while integrated distance measurement system with resolution of 8 µm allows repeat accuracy of ±0.05 mm. Able to move weights up to 5 kg, system features max speed of 1 m/s and max acceleration of 3 m/s².

Igus, Inc.
East Providence, RI 02914 0349
Mar 23, 2009 Chainflex® CF Robot twistable cable can handle 3 million torsional movements to ±270°. Designed for robotic and non-robotic applications, it features torsion-resistant tin-plated copper shield sheath, with outer sheath material being high-grade TPE mixture. System is suited for use with Triflex® R cable carrier, which protects moving cables and hoses on 6-axis robots and can twist up to 380°/yd.

Tregaskiss, Ltd.
Oldcastle, ON N0R1L0  Canada
Mar 17, 2009 Supplied standard with TOUGH GUN ThruArm(TM) Series Robotic MIG Guns or available separately, TOUGH GUN(TM) LSR Low Stress Robotic Unicables include rotating power connection that relieves stress caused by routine cable torsion, and protective conduit to shield cable components from harsh welding environments. At 100% duty cycle, LSR Unicables provides 500 A air-cooled capacity with CO2 and 350 A with mixed gases, based on NEMA standards.

Harmonic Drive, LLC
Peabody, MA 01960
Feb 20, 2009 Available with basic dimensions ranging from 128-230 mm dia x 78-127 mm long, FHA-C series has shape and hollow-shaft construction that aid in downsizing of machinery and equipment. Products are optimized rigidity and accuracy, and series of multifunctional control units are available. Max torque ranges include 21-67, 22-72, 27-86, and 31-102 lb-in., depending on model and gear ratio, which are available as 50, 100, and 160.

Schunk
Morrisville, NC 27560
Feb 05, 2009 For production/assembly of minuscule components, miniaturized RP gripper rotary unit is comprised of RM rotary module with pneumatic parallel gripper based on MPG. Rotary module sizes 08 and 10 can be combined with gripper sizes 12, 16, and 20, while gripper can be equipped with 2 different types of ID/OD gripping force safety devices. Angle of rotation of mini rotation modules is 190°, and end position accuracy reaches ±0.05°. Drive torque is 0.107 Nm (RM 08) or 0.224 Nm (RM10).

AverMedia Technologies, Inc.
Milpitas, CA 95035
Jan 29, 2009 Featuring 2 megapixel camera, portable AVerVision(TM) VP-1 fills need for basic document or 3D object presentation. Camera head sensor produces sharp images to clearly display small details and text. Weighing 2.7 lb, mechanical arm document camera folds over itself for transportation and storage. Plug-and-play system is suited for K-12 educators, corporate boardrooms, and courtrooms.

Pad Print Machinery of Vermont
East Dorset, VT 05253
Jan 27, 2009 Adaptable to manufacturing and assembly applications as well as product marking and decorating, XE-Robot features 4-axis SCARA robot that is programmed to select from 6 pads of different shapes and sizes, and pick up variety of inked images from 6 cliches, each with its own ink cup. Two-axis fixture assembly allows printing on 5 sides of part, in multiple locations on each side. Robot can be programmed to retrieve pick-and-place hand, which can load and unload parts on fixture between cycles.

RoboteQ
Phoenix, AZ 85022
Jan 26, 2009 Able to directly drive up to 120 A on each channel at up to 60 V, AX2860 accepts commands from R/C radio, analog joystick, or RS232 interface. Channels can be operated independently or combined to set vehicle direction/rotation, and motors may be operated in open- or closed-loop speed mode. Along with intelligent current sensing and controlling, features include inputs for 2 Quadrature Encoders up to 250 kHz and 4 limit switches for precise speed and traveled distance measurement.

Denso Sales California, Inc.
Long Beach, CA 90810
Jan 09, 2009 With 3-D simulation feature, WINCAPS III enables layout of automation workcell in virtual environment. CAD drawings can be imported in standard VRML and DirectX formats, and variables can be input or changed. Users can verify reach, determine obstacle clearances, detect collisions, troubleshoot and debug programs, and determine cycle time. Providing real-time I/O status indicators and detailed control logs, software allows remote monitoring of workcell operations.

ATI Industrial Automation
Apex, NC 27639
Jan 06, 2009 Able to pass current up to 28 A, 500 Vac/700 Vdc, MT9 module includes Amphenol MS-style connectors and protective earth safety ground. Additional elements of construction include fluid-resistant seal on contacts, specially designed contact pins for low resistance, and compact design. This high-power Tool Changer electrical module is compatible with ATI Tool Changer models QC-110, QC-150, QC-300, and QC-510.

ATI Industrial Automation
Apex, NC 27639
Dec 15, 2008 Model QC-1210 Heavy Automation Tool Changer features 3 failsafe locking mechanisms to ensure high-moment capacity and strength. System incorporates separate modules that can be mounted on any of 6 flats and has 3 Ready-to-Lock sensors, which detect when tool plate is within 0.06 in. of master plate to make sure they are parallel. No-Touch Locking(TM) technology allows up to 0.10 in. plate separation when locking and all locking parts are made of Rc 58 stainless steel.

Adept Technology, Inc.
Livermore, CA 94551
Nov 20, 2008 Featuring integrated robotic vision and conveyor tracking within single compact controls platform, ACE PackXpert(TM) System enables manufacturers to respond quickly to part changes without lengthy reprogramming. It includes intuitive graphic interface and 3D workspace display for visualizing system operation including physical and conceptual objects. Software allows users to coordinate efforts of entire line of robots by working across multiple controllers.