Tregaskiss, Ltd.
Oldcastle, ON N0R1L0
Jul 02, 2008 Designed for thru-arm robotic welding systems, TOUGH GUN(TM) ThruArm(TM) Series robotic guns with LSR Unicables is available as complete package for both clutch and solid-mount robotic systems. At 100% duty cycle, they provide 500 A air-cooled capacity with CO₂ and 350 A with mixed gases, based on NEMA standards. LSR Unicables include rotating power connection to relieve stress caused by routine torsion and protective conduit to shield cable components from harsh welding environments.

Orbitform
Jackson, MI 49204
Mar 18, 2008 Weld Tip System (WTS) for robotic spot welding inspects spot welding electrodes and ensures that face diameters and general appearance meet acceptance criteria. It incorporates CURE® technology (Concurrent Universal Recognition Engine) memory processing architecture and is suited for all welding cells.

Panasonic Factory Solutions Company of America
Buffalo Grove, IL 60089
Feb 15, 2008 Featuring bus communication interface to control lift arc start and end, TAWERS-Aluminum MIG can detect when current is flowing and retracts to take pressure off wire, resulting in reliable arc ignition. It uses 3 motor system to ensure accurate wire feed, and features syncro-weaving function and servo feeder for real-time parameter adjustment from thick to thin materials. Product can also use high voltage touch sensing through aluminum oxide, which prevents wire bending.

KUKA Robotics Corp.
Clinton Township, MI 48036
Jan 31, 2008 With working envelope of over 1,400 mm, Model KR 5 arc can handle payload of 5 kg and supplementary load of 12 kg. Space-saving and lightweight unit can be mounted on floor or inverted on ceiling, and features high continuous-path accuracy. Model KR 5 arc HW (Hollow Wrist) comes with protection rating of IP54, and has fluid supply system integrated into arm. Both units weigh 120 kg.

FANUC Robotics America, Inc.
Rochester Hills, MI 48309 3253
Jan 18, 2008 LR Mate 200iC/5L 6-axis mini-robot with iRVision (built-in vision) is suited for high volume applications or small batch production. It can be mounted in variety of positions including floor, tabletop, inside machines, angle, and invert. ROBOGUIDE-WeldPRO simulation package models system and downloads programs to robot, which run without touch-up. Vision Shift feature eliminates usual touch-ups and verifications associated with off-line programming or fixture and tool changes.

Nachi Robotic Systems, Inc.
Novi, MI 48375
Jan 16, 2008 With compact design, Presto Models ST70L and ST100 are suited for high-density/multi-layered robotic installations. Both can be used to mount lightweight spot welding guns, and, with significant allowable wrist torque, units can also support large material handling grippers. Optional integrated dress package is available.

Panasonic Factory Solutions Company of America
Buffalo Grove, IL 60089
Jan 09, 2008 Suitable for first time automation users as well as large companies automating low-volume projects, pre-engineered PerformArc PA-55 comes with 6-axis robot, torch, and inverter welder with artificially intelligent waveform control. Cell accepts payload up to 250 lb per side and welds typical part sizes of 12 x 53, 18 x 45, and 24 x 30 in. System controls, diagnostics, and programming are managed by color teach pendant, running Windows CE to flatten learning curve.

Abicor Binzel
Frederick, MD 21703
Nov 12, 2007 Robot support iCAT swings away mechanically by up to 10° in event of collision between welding torch and workpiece, helping avoid damage to welding torch, peripherals, and robot. Integrated switch-off fuse reacts directly in event of crash and stops robot immediately. Support features central media guide and torsion-resistant cable assembly excursion ±240° in 6th axis. System is available for air- or liquid-cooled welding torches.

Motoman, Inc.
West Carrollton, OH 45449 2158
Dec 13, 2006 Featuring Motoman EA-Series Expert Arc welding robot partially enclosed by cylindrical safety enclosure, ArcWorld® C-500 allows robot to access parts through opening in front of enclosure. Two MHTH headstock positioners with 4.3 in. dia through-holes for tooling connections are integrated into robot riser. Robot accommodates parts/tooling with span of 39.4 in. and diameter of 43.3 in. High-speed powered roll-up doors safeguard operator from robot station during welding.

Orbitform
Jackson, MI 49204
Dec 07, 2006 Mini-Z resistance welder provides standalone option for short-run shops, and can be integrated into large scale production manufacturing operations. With 36 x 40 in. footprint, personal weld cell is accessible for tooling changeover and features 24 x 16 in. work window. System also includes programmable Kawasaki robot, teach pendant controls, Fronius weld control, 3D weld path modeling, and turnkey tooling/fixturing, as well as DeviceNet options.

IAI America, Inc.
Torrance, CA 90505
Jul 17, 2006 Featuring servo control motor and rigid base of aluminum extruded material, TT Table Top Robot eliminates misstepping and can be used in conjunction with teaching pendant, PC software, or other tools. Type 2020 offers 200 x 200 mm operating range while Type 4040 provides 400 x 400 mm range. Gate model is suited for unbalanced loads, or applications where Z-axis receives heavy load or load overhangs slider. Cantilever model accommodates larger or irregularly shaped loads in fixed condition.

IAI America, Inc.
Torrance, CA 90505
Jun 26, 2006 Available in 2- and 3-axis specifications, TT Table Top robot's rigid, extruded aluminum base; ball screw; and servo control motor allow for positioning repeatability of ±0.02 mm. Its 3-axis configuration comes with Z-axis brake and lets users perform 3D arc interpolation and path movement. Available as Gate Type with fixed Y axis or as Cantilever Type with open work surface, robot stores up to 64 programs and runs up to 16 programs simultaneously.

Panasonic Factory Solutions Company of America
Buffalo Grove, IL 60089
Mar 15, 2006 TAWERS Series Robotic Welders and TA Series Manipulators offer On-Board Mastering, which enables alignment of robot to factory-set zero-point for 5 axes of arc welding robot operation. After initiating mastering process, software resident on Windows CE teach pendant signals operator to select axis of motion. Robot drives arm to calibration location where operator withdraws precision-threaded pins. Robot then drives axis against pins, locating zero position of chosen axis.

Panasonic Factory Solutions Company of America
Buffalo Grove, IL 60089
Nov 09, 2005 TAWERS(TM) Robots are powered by Embedded Arc Control technology, which merges robot, welder, and wire feeder controls into one unit, housed entirely within robot controller. SP-MAG short-circuit welding process provides virtually zero arc spatter, minimizing post-weld cleanup. Automated wire extension control maintains constant wire stick-out during welding, resulting in consistent penetration and weld quality regardless of taught path variations.

Robohand, A De-Sta-Co Div.
Madison Heights, MI 48071
Apr 27, 2005 Model QC-1200 automatic tool changer accommodates different styles of parts on same assembly machine. Modular design options include Device Net Bus module, self-sealing fluid or pneumatic module, 19 pin I/O module, and 200 A weld power module. Integral latch/unlatch sensor signals coupled condition of tool changer. Unit meets demands of robotic resistance welding and material handling applications.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Apr 06, 2005 Dual, fixed-table eCell™ system is capable of MIG, Synergic MIG, MIG Pulse, and flux-cored arc welding procedures on parts that can be welded without reorientation. It welds variety of materials including steel, stainless steel, and aluminum. Digitally-controlled, 350 A inverter welding power source is capable of high-speed communication and is delivered with 60+ factory-programmed waveforms optimized for variety of materials or applications.

FANUC Robotics America, Inc.
Rochester Hills, MI 48309 3253
Sep 24, 2004 Suited for welding parts of all sizes and configurations, ARC Mate 100iBe and ARC Mate 120iBe 6-axis robots utilize mechanical arms with optimized servomotor, amplifier, and controller features. Both offer maximum reach in confined areas and use R-J3i B Mate Controller and ArcTool software. Integral Arc Welding Dress-Out Package facilitates torch access and reduces arm-to-arm interference when using multiple robots on one part.

Motoman, Inc.
West Carrollton, OH 45449 2158
May 14, 2004 ArcWorld® V-6300 features 3 overhead-mounted, 6-axis EA1400 Expert Arc welding robots configured to facilitate tool changes. Controlled by one XRC 2001 robot controller, all robots have 6.6 lb payload and 54.6 in. horizontal reach with ±0.003 in. repeatability. Workcell design provides part positioning on robot and operator stations simultaneously. Ferris-wheel type positioner includes two 2,646 lb capacity headstocks.

Motoman, Inc.
West Carrollton, OH 45449 2158
May 14, 2004 Operated via NX100 robot controller, Expert Arc robots EA1400N and EA1900N feature internal cabling design that allows them to work in tight spaces or on workpieces positioned close to manipulator arm. T-axis can rotate torch ±200° without cable interference. With repeatability of 0.003 in., 6-axis EA1400N has 54.7 in. horizontal and 95.6 in. vertical reach, while EA1900N features 75 in. horizontal and 134.6 in. vertical reach.

Motoman, Inc.
West Carrollton, OH 45449 2158
May 14, 2004 Expert Spot 6-Axis Models ES165N and ES200N offer 363.8 and 441 lb payloads, respectively. Both feature 104.4 in. reach and repeatability of ±0.008 in. Design routes servo gun cables and utilities through robot's upper arm, extending replacement of internal cables to 24,000 hours. Able to operate up to 4 robots, Model NX100 Control features Windows CE programming pendant with color touchscreen display, integrated soft PLC functions, and password protection.