KMT Robotic Solutions, Inc.
Auburn Hills, MI 48326
Oct 19, 2007 Designed for waterjet trimming of headliners, carpets, dashboards, and insulation products in automotive interior industry, Cutting Box Original V can be customized to meet specific trimming needs, and comes with IRC5 robot controller for single and multi move operation. System can be equipped with 6 different and pre-designed robot configurations. It features HMI, tailor-made vacuum systems, and WaterjetWare robot software that helps customers reduce online programming time.

QinetiQ North America
McLean, VA 22102
Oct 19, 2007 MAARS(TM) (Modular Advanced Armed Robotic System) features chassis with uni-body frame that provides battery and electronics accessibility and utilizes M240B Medium Machine Gun. Manipulator arm has nominal 100 lb lift capacity and can replace turret-mounted weapon, transforming robot from weapons platform to Improvised Explosive Device (IED) identification and neutralization tool. System weighs 350 lb and includes digital control unit.

Adept Technology, Inc.
Livermore, CA 94551
Oct 17, 2007 Providing high speed and precision motion, Adept Python(TM) Cleanroom Class 1 Linear Robot Modules are suitable for assembly and handling in disk drive, solar, semiconductor, and medical industries. Modules run on SmartController(TM) CX controls and software platform, providing integrated vision and embedded networking.

Freescale Semiconductor
AUSTIN, TX 78735-8598
Oct 10, 2007 Designed to speed creation of networking equipment for 3G Long Term Evolution and other broadband wireless technologies, Development Platform delivers closely coupled Layer 1 and Layer 2 LTE radio processing. It combines programmable data plane software with AMCs featuring MPC8548 PowerQUICC(TM) III processor and quad-core MSC8144 StarCore DSP. Radio processor cards are interconnected via low latency Serial RapidIO® and Gigabit Ethernet schemes.

ROMER/CimCore
Farmington Hills, MI 48331
Oct 08, 2007 Suited for smaller jobs where light weight and small footprint are required, INFINITE 5012 features WiFi connectivity and onboard battery power for portability. Integrated tungsten counterweight delivers light-touch ergonomics and fluid motion, while automatic probe detection enables probe changes without recalibration. Solution is available with any of ROMER's standard software packages, including PC-DMIS Portable, DOCS, and Delcam PowerInspect.

GE Fanuc Embedded Systems
Huntsville, AL 35803
Sep 19, 2007 Respectively configured with 2U, 13-slot and 8U, 15-slot chassis, MicroTCA(TM) MP-2000 and MP-3000 are suited for network-centric MicroTCA development applications. Both scalable platforms, compliant with PICMG standards, come pre-configured with power module, 2 cooling units, and MicroTCA Carrier Hub with PCI Express fabric module. Other features include Telum(TM) Intel®-based processor, dual SATA storage modules, multi-port GigE I/O interface, and VGA graphics AdvancedMCs.

Freescale Semiconductor
AUSTIN, TX 78735-8598
Sep 19, 2007 Designed to enable embedded systems running Linux® OS, ColdFire® MCF5445x Series delivers 410 Dhrystone MIPS core performance at approximately 380 mW. Family includes 12 models with on-chip memory management unit as well as support for 10/100 Ethernet, USB OTG, ATA, and PCI. DDR memory controller supports DDR1, DDR2, and mobile DDR memory. Inclusion of dual-role master/slave SPI allows other SPI devices to communicate with microcontroller as master or slave.

MobileRobots
Amherst, NH 03031
Sep 13, 2007 With Mobile Robots Training Factory, users can customize robots to work in labs, factories, hospitals, and offices. Software lets non-programmers train robots to do specific jobs in specific workplaces with no programming required. Manufacturing robots can be trained to drive fast, honk at obstructions, and notify boss should obstructions continue to block way. Security robots can be instructed to check for open doors and to respond aggressively to intruders.

I&J FISNAR, INC
Fair Lawn, NJ 07410
Sep 11, 2007 Featuring resident program capacity of 100 programs with total point memory of 400,000 and 4,000 points of positioning data per program, I&J4000-LF series of bench top dispensing robots can accept tool weight of up to 5 kg and worktable load of 10 kg. Resolution is 20 microns and interpolation is in all axes. RoHS-compliant unit features fluid-purge button located on front panel. It is suited for form-in-place gaskets, adhesives, potting, coating, and filling.

SAS Automation, Ltd.
Xenia, OH 45385
Aug 24, 2007 Equipped with razor sharp blade positioned at 45° angle, Guillotine Gate Trimmer can shear sprue gate in hard to reach narrow places. Equipment holds blade on special cylinder that can be mounted at many angles to actuate gate cutting process. Actuated guillotine motion from cylinder allows precision cutting from awkward locations.

Adept Technology, Inc.
Livermore, CA 94551
Aug 24, 2007 UL-Listed Cobra(TM) 4-axis SCARA series and Viper(TM) 6-axis articulated robot series utilize Adept's SmartController(TM) CX controls and software platform, providing integrated vision and embedded networking. Both series are targeted at Medical, Pharmaceutical, Food, Consumer Goods, Cosmetics, and Lab Automation industries that require safety and regulatory compliance provided by Underwriters Laboratories, Inc. They also meet ANSI/RIA 15.06-1999 Safety standards and CE marking directives.

Schunk
Morrisville, NC 27560
Aug 23, 2007 Sealed to IP67 requirements, DPZ-plus sizes 40 and 50 are designed for automated handling of small, round components in dirty or underwater environments as well as those with abrasive dust. Base jaws consist of external circular guide with wiper seal and internal multi-tooth guide, and vent part prevents differences in pressure. Circular piston drive offers respective gripping force of 51 and 65 lbf in DPZ-plus 40 and DPZ-plus 50, on strokes of 2.5 or 4 mm per finger.

Sun Microsystems, Inc.
Santa Clara, CA 95054
Aug 17, 2007 Integrating multiple systems-virtualization, processing, networking, security, floating point units, and accelerated memory access, UltraSPARC T2 handles diversity of workloads. It provides support for massively threaded, open source Solaris(TM) and other real-time operating systems. Unit includes dual, virtualizable, and multithreaded 10 Gigabit/sec Ethernet ports with built-in packet classification, and can address security needs including NSA-approved algorithms.

SAS Automation, Ltd.
Xenia, OH 45385
Aug 15, 2007 Available in 0, 14, 20, and 30 mm sizes, WSL TR Long Angle Clamp allows for top mounting of gripper arms or holders to frame profile which are adjustable parallel and perpendicular to frame. Screw head points out from profile, enabling clamps to be mounted close together, while reversible profile locator allows for diverse tool location placement without compromising thickness/strength of head clamp.

Distech Systems, Inc.
Rochester, NY 14606
Aug 15, 2007 Weighing less than 1 ton, Model DS1100-MTL-TD can be moved from one machine to another with pallet jack. In addition to feeding parts directly from conveyor or tray, 7-axis robot can load or unload auxiliary equipment during machining. Robot can also transfer parts to secondary operations such as washing, inspection, or marking. Two drawers will accommodate tray up to 18 x 24 in., and trays can be wire, injection molded, vacuum formed, or heat-treated.

Motion Controls Robotics
Fremont, OH 43420
Jul 24, 2007 Robotic SUBTA (Stand Up Bottle Take Away) System enables in-line automated PET bottle handling and unloading. Able to roll away from molding machine to allow mold changes, portable unit grabs and sets bottles on conveyor standing up. Single- and double-row systems offer pattern teaching capability, tooling the permits use of angled and/or tapered bottles, and on-the-fly programmable operator pendant with stored recipes and menu selection for patterns.

Microsoft Corp.
Redmond, WA 98052-6399
Jul 20, 2007 Microsoft Robotics Studio v1.5 enables software developers to deploy scenarios and software applications on embedded platforms. Package also supports Windows® Embedded CE 6.0 and Windows Mobile® 6. Features include visual programming language, 3D real-world based visual simulation environment, PhysX engine, support for vision and speech recognition, and editor for configuring/targeting software services for robotics platforms.

AGI - American Grippers Inc.
Trumbull, CT 06611
Jul 19, 2007 Able to spread and place up to 12 in. ID seals, AGP-8-OR facilitates part ejection and part seating. Pneumatic parallel gripper offers independent spreading and ejector movements and has 1.5 in. dia through hole. It can be tooled to accommodate all types of rings from .5-12 in. ID, and end of stroke sensing is available. While 8-jaw AGP-8-OR measures 5 in. dia x 5 in. tall, 6-jaw version (AGP-6-OR) measures 2.5 in. dia x 2.7 in. tall and is suited for handling up to 3 in. ID seals.

Applied Robotics, Inc.
Glenville, NY 12302
Jul 18, 2007 Scalable for use in variety of industries and applications, stepper-based Smart Gripper 2.0 features fail safe brake system, accurate robotic finger positioning, and adjustable grip force without need for software or controllers. Programmable unit can be integrated with most robots and is designed specifically for micro plate handling. Operating using 24 Vdc discrete signals, gripper enables up to 32 programs to be selected using 5 discrete input lines.

Intel
Sausalito, CA 94965
Jul 02, 2007 Running at 2.93 GHz, Intel Core(TM) 2 Extreme processor QX6800 is designed for digital design professionals who require high performing computers. Enabling 8 Mb cache, processor is manufactured using 65 nm process and supports 1,066 MHz system bus.