KUKA Robotics Corp.
Clinton Township, MI 48036
Apr 27, 2005 CAMRob CAM Interface software, combined with 6-axis robot and high-speed spindle, facilitates milling of complex prototypes and eliminates pendant-based programming. Users can mill up to 5 sides of work pieces in one setup, and APT or G-code files can be downloaded, converted to KUKA's robot programming language (KRL), and executed. Controlled from PC based platform, robots offer payload capacities from 3–500 kg and reaches from 635–3,900 mm.

Robohand, A De-Sta-Co Div.
Madison Heights, MI 48071
Apr 27, 2005 Model QC-1200 automatic tool changer accommodates different styles of parts on same assembly machine. Modular design options include Device Net Bus module, self-sealing fluid or pneumatic module, 19 pin I/O module, and 200 A weld power module. Integral latch/unlatch sensor signals coupled condition of tool changer. Unit meets demands of robotic resistance welding and material handling applications.

Rixan Associates, Inc.
Dayton, OH 45459
Apr 21, 2005 Compact, 6-axis RV-3S and 5-axis RV-3SJ robots are IP65 rated and feature 64-bit RISC/DSP multi-tasking controller. They offer arm compliance, collision detection, and position restoration, in addition to maintenance forecasting and ANSI safety compliance. Operating at speeds to 5,500 mm/sec, robots have reach of 642 mm and payload capacities to 3 kg. Also offered in clean room versions, products are suited for laboratory and assembly automation.

KUKA Robotics Corp.
Clinton Township, MI 48036
Apr 20, 2005 Suited for foundry, die casting, and forging applications, robots are offered in 11 floor-mount models that handle payloads from 16–500 kg as well as 6 shelf-mount models rated for payloads from 16–210 kg. Each mechanical model can be configured in dozens of variations. With forearms and IP 67 rated wrists coated with corrosion-resistant and heat-reflecting finish, robots can operate continuously in environments up to 100°C and have 3,700 mm reach.

FKI Logistex North America
St. Louis, MO 63132
Apr 15, 2005 EASYpick® Trak3(TM) devices snap into track at pick face with cable-less connection. Four-inch wide Trak3 display and 2 in. wide components permit dense placement and precise alignment with pick location. Trak3 units replace single incandescent gumball picking direction light with 6 bright LEDs. Components include self-diagnostic tools that can be run at device and/or network level and embedded software that checks and self-corrects common problems.

Scientific Technologies Inc.
Fremont, CA 94555
Apr 13, 2005 With operating range of 8 m and response time of 16 ms, PA4600-BB provides 2 beams spaced either 19.6 in. or 23.6 in. apart for torso detection at entry/exit openings to hazardous applications. System has input voltage of 24 Vdc, and 2 solid state PNP safety control output signals provide 625 mA each for compatibility with standard safety relays. PA4600-BB is type 4 ESPE device per UL61496, and meets RIA and ANSI R15.06 specification for guarding robot work cells.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Apr 06, 2005 Dual, fixed-table eCell™ system is capable of MIG, Synergic MIG, MIG Pulse, and flux-cored arc welding procedures on parts that can be welded without reorientation. It welds variety of materials including steel, stainless steel, and aluminum. Digitally-controlled, 350 A inverter welding power source is capable of high-speed communication and is delivered with 60+ factory-programmed waveforms optimized for variety of materials or applications.

Toshiba Machine Co., America
Elk Grove Village, IL 60007
Mar 29, 2005 Model TH450 is equipped with high-speed ball screws and full-function TS2000 controller with built-in PLC, operation panel, and multitask function. With total arm span of 450 mm, unit reaches composite speeds of 7.33 m/s and 3-axis speeds of 2000 mm/s. Positioning repeatability in X and Y axes is ±0.015 and ±0.01 in Z axis. Robot carries 5 kg max payload and can be incorporated into tight spaces because of its cable position.

Precise Automation LLC
Los Altos, CA 94024
Mar 09, 2005 Scalable for work areas up to 400 x 2,000 mm, PrecisePlace Series 1300c is offered in 3- or 4-axis configurations with 1 kg payload and zero-backlash drive system using brushless dc motors. Guidance 3400 controller inside robots contains 4 motor drivers, 6 encoder input channels, 700 MIPS processor, digital and analog I/O, and Ethernet, DeviceNet, and RS-232 interfaces. Software includes motion commands, plus continuous path motion planner and trajectory generator.

KUKA Robotics Corp.
Clinton Township, MI 48036
Mar 07, 2005 With third axis linkage made of carbon fiber composite material, KUKA KR 100-2 PA™ 4-axis robot handles 600 palletizing cycles per hour and payloads up to 100 kg. Its footprint and 3,000 mm vertical reach provide flexibility in space-limited applications. PalletTech™ palletizing software, included with robot, provides graphical Windows interface for programming on conventional PC and helps users calculate ideal pallet structure.

Toyota Material Handling U.S.A., Inc.
Irvine, CA 92623-7419
Mar 03, 2005 Narrow aisle 7-Series Picker offers anti-rattle mast staging, spring suspension system, and electronic disc brakes. Lift motor provides 2-speed lift/lower control, and Separately Excited Drive Motor and Transistor Control System with MOSFET offers smooth speed control for precise positioning of truck, regardless of speed. Auto-steer centering automatically centers drive tire upon start-up, assuring operator of truck's travel direction prior to movement.

Dispense Works, Inc.
Mchenry, IL 60050
Feb 28, 2005 Series RP Robot is optimized for dispensing and assembly with high acceleration, motions, and real time control of all devices. Brushless motor allows any number of stops to be programmed to suit application. Low profile unit has ability to integrate with other peripheral devices such as pick and place, conveyor, and existing loading equipment. Optional Windows Software simplifies programming with .DXF, .PLT, and G-Code inputs along with dynamic graphical interface.

SSI Robotics
Tustin, CA 92780
Feb 14, 2005 QuickStack™ conveyor and gripper-based microplate automation system utilizes robots from Yamaha Robotics enabling adaptation to wide range of applications. It works with microplate-based instruments and can bring microplates to and from dispensers, readers, washers, and more. System can be adapted to vials and other labware. Gripper-based versions provide recessed nest access, stacking of multiple instruments, and dynamic scheduling.

Kitagawa Div. North Tech Workholding, Inc.
Schaumburg, IL 60173
Jan 19, 2005 Designed to deliver part stability during machining center operations, PLS Series Pull Down Work Grippers deliver consistent gripping forces along with axial, pull down actuation for length control on Z axis. Product is fully sealed against chip and coolant contamination, and optional seating detection system is available. Available in 4, 6, and 8 in dia, 2 or more units can be grouped together for increased productivity.

Explore1.ca
Aurora L4G 6H8  Canada
Jan 19, 2005 Hydaulically powered 5-Axis End Effector utilizes vacuum connection system for lifting and positioning pre-glazed curtain wall panels and other architectural components weighing up to 3,000 lb. End effector mounts to tangs of most 6,000–10,000 lb variable reach forklifts and uses up to 16 vacuum cups in customizable configurations. Six remote functions enable installers to move panels from horizontal plane to vertical plane with smooth precise movements.

KUKA Robotics Corp.
Clinton Township, MI 48036
Jan 10, 2005 Designed for top loading and unloading of IMMs, KS™ Series has low-profile design that reduces ceiling height requirements on IMMs up to 1,200 tons. Downward working envelope promotes flexibility and reduces cycle times. KR 16, 30, and 60 models are offered with payloads to 60 kg and vertical reach for part removal to 1,800 mm. Robots can also be used on die-casting machines and machine tools for part loading and unloading, palletizing, deburring, and part marking.

KUKA Robotics Corp.
Sterling Heights, MI 48312
Jan 10, 2005 KS™ Series 6-axis Robots provide top loading and unloading of injection molding machines. Series is available in KR 16, 30, and 60 models with payloads to 60 kg and vertical reach for part removal to 1,800 mm. Robots are also suited for applications on die-casting machines and machine tools for part loading and unloading, palletizing, deburring, and part marking.

Yamaha Robotics
Edgemont, PA 19028
Dec 31, 2004 Rod-style YMS Series works with ERCD multifunction controller that offers additional pulse train function. Built-in motor is installed directly to ball screw and can be removed for maintenance. Resolver used for position detection mechanism operates under variety of environmental conditions. Cylinder is equipped with lubrication unit using high oil content fiber net for ball screw nut section and contact scraper for rod bearing section.

Staubli Corp.
Duncan, SC 29334
Dec 29, 2004 Utilizing direct-drive JCM® motor, Model TX40 features 450 mm work envelope and 2.3 kg maximum payload. Closed mechanical structure provides IP65 protection, while submersible wrist is reinforced and protected to IP67, making it suited for cleanroom applications and hostile environments. Model TX40 is intended for manipulation in laboratories or in semi-conductor industry and for executing processes involving delicate, small parts.

Juki Automation Systems
Morrisville, NC 27560
Dec 03, 2004 Utilizing linear motor technology and proprietary HI-Drive mechanism, FX-1R placement machine achieves throughputs of 33,000 cph (optimum) or 25,000 cph (according to IPC 9850 standards). It employs dual placement heads, with 4 nozzles each, on one X beam, where heads alternate picking and placing. Featuring SuperCast™ single piece frame, unit utilizes Windows XP OS for security, network connectivity, and peripheral support such as USB.