Printing & Duplicating Equipment
Intended to meet large-part manufacturing needs within automotive, aerospace, appliance, and robotics industries, Big Area Additive Manufacturing (BAAM) system uses chassis, drives, and control of Cincinnati laser cutting system as base and extrudes hot thermoplastic to build parts layer by layer. Linear motor-driven system has 6.6 x 13.1 x 2.9 ft work envelope and extrusion rate of ~38 lb/hr for printing polymer components.
Combining automation, knife-creasing technology, and completely sealed and integrated polyurethane reactive (PUR) gluing system, BB3202 PUR-C produces soft- and hard-cover, perfect-bound books from 3.94 x 3.94 in. to 15.15 x 12.6 in. with thicknesses from 0.04–2.36 in. at rated to 350 books/hr. Gluing system remains fully closed while dispensing precise amount of PUR glue to milled book block, preventing vapors from escaping and air from compromising remaining adhesive. Read More
Delivering sector-by-sector drive cloning at up to 22 GB per minute, standalone USB 3.0/eSATA Drive Duplicator Dock (SKU: SDOCK2U33RE) can also be used as high-speed drive dock when connected to laptop or desktop computer via either USB 3.0 or eSATA. Device supports 2.5 and 3.5 in. SATA hard drives (HDD) and solid state drives (SSD) and features dual bay, top slot-loading design with drive doors. Dock is compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives.
JetConverter L350 can be used with Truepress Jet L350UV inkjet label printing system to construct fully integrated production line spanning data input to printing and processing and finishing. Offering processing speeds to 209.9 fpm, system comes equipped with standard functions for label printing, including varnishing, lamination, die-cutting, and slitting, as well as sliding, touchscreen controller. Path line length decreases times for setup and adjustment and reduces paper waste. Read More
With 19.3 x 15.4 x 7.9 in. build envelope, Objet500 Connex1 can produce parts from 3 diverse materials in single production run. Material cabinet contains 8 cartridges, extending unattended runtime and minimizing changeovers. Reloading of material and support cartridges while printer is operating allows for continuous part production. In addition to all Connex1 capabilities, Objet500 Connex2 adds ability to combine droplets from two base materials to produce new materials or digital materials. Read More
Respectively featuring 2.7 in. color touchscreen and 2.2 in. mono graphics display, WorkForce® WF-2660 and WF-2650 leverage PrecisionCore™ technology and feature S1 printhead configuration. Achieveing 13 ISO ppm (black) and 7.3 ISO ppm (color) speeds, printers offer 150-sheet paper capacity and automatic 2-sided printing/scanning/copying/faxing. With 2.2 in. mono graphics display, compact WorkForce WF-2630 offers 100-sheet paper capacity and 9 ISO ppm (black) and 4.5 ISO ppm (color) speeds.
Featuring UV and hot-air drying technology, EF Flexo Printing Press prints diverse substrates including film, paper, shrink sleeves, and flexible packaging. iStop technology optimizes stops and starts during printing, while Crisp.Dot technology utilizes free-running rubberized impression roller and temperature control system to ensure ink dots do not stretch or streak. With AutoTeach technology, operators determine desired web path and machine automatically teaches itself path being used. Read More
USB Flash Drive Duplicator and Eraser (SKU: USBDUP15) enables simultaneous copying of content from one USB flash drive to up to 5 USB flash drives at speeds of up to 1.5 GB/min. Also, functionality lets user securely erase up to 6 flash drives with single-pass and multi-pass overwriting/DoD erasing. Compact and portable solution, supporting USB 3.0/2.0/1.1 flash drives, is TAA compliant, has built-in LCD, and offers asynchronous and synchronous duplication modes. Read More
With multitasking controller with 30 ppm print engine, MX-C301W features copy/print/scan/fax capabilities as well as wireless connectivity, Adobe® PostScript® 3™ printing, and 7 in. diagonal touchscreen control panel. Support is also included for Sharp OSA® platform and Sharpdesk® Mobile app. While offering flexible workflow, printer also provides such security features as SSL Encryption, confidential printing, secure fax, AES 256-bit encryption, as well as memory/sata overwriting. Read More
Intended for fabric production and soft signage markets, 64 in. SureColor® F7170 leverages Epson PrecisionCore™ TFP® print head and Epson UltraChrome® DS ink system to deliver quality printing with optimized dot control for dye-sublimation applications. Highly accurate take up reel and substrate system delivers winding accuracy from 0–.19 in. on transfer paper rolls for digital textile applications, including decorative table tops and runners, POP banners, and light way exhibit displays. Read More
PrinTek printers come with tooling system that provides quick, flexible pin positioning and locking for facilitated setup of production runs. Disks and tracks, provided by tooling, give tooling pins R-Theta style range of freedom. When disk is secured and tightened and pin is locked in track, system is locked and ready to run multiple cycles holding PCB position and registration. Tooling features additional set of pins with shoulders raised by 0.25 in. to accommodate second side printing. Read More
Operating without computer or complex software, M2/SSD/HDD Duplicators make multiple copies of M2 (NGFF) SSD or 2.5 in. SATA HDD/SSD media from single master drive. Each comes bundled with 2.5 in. M2 flash drive kit that turns M2 card into 2.5 in. SATA SSD. Users can mix and match M2 (NGFF) SSD, 2.5 in. SSD, or standard SATA hard drives into duplicator for transferring content between multiple media formats. With snap-in drive bays, drives can be added/removed without special tools. Read More
Available in working widths up to 117 in., HPH-C Dual Belt Flatbed Chilling Laminator consists of upper and lower driven PTFE-coated fiberglass belts between which material being processed is subjected to chilling and controllable pressure. Series of anodized, extruded aluminum Fincool™ elements contact backside of upper and lower belts and transfer chilling to belt and then to material, minimizing thermal shock and ensuring even and consistent cooling. Read More
Designed to meet stringent requirements of large format digital print imaging, PALIGHT Digital Flat Foamed PVC Sheets feature static-free characteristic that optimizes image quality by making text and graphics look sharp and overall colors more uniform. PALGLAS Digital Ready-to-Print Acrylic Sheets eliminate time consuming process of treating with pre-print adhesion promoter. Print shop operators just remove protective masking and load sheet into printer. Read More
Accommodating label roll stock up to 2 in. wide, Model TT130SMC is especially useful for data center and solar installation labeling. Printer features 300 dpi print head, print speed up to 3 ips, and Ethernet port that allows user to connect to existing network or to wireless router for wireless, portable printing. For optimized workflow, users can network several TT130SMC printers. Optional hard-shell carrying case protects printer when transporting to job sites. Read More
Along with 5 x 5 in. active area, BlueWave® LED Flood System is available with 365, 385, and 405 nm irradiator heads to optimize curing process between light-curable material and curing system. Intensity and uniformity contribute to accelerated and repeatable cure times, while instant on/off capability eliminates mechanical shutter components and warm-up time requirements. CE-certified and RoHS-compliant system suits manufacturers looking to complement their green initiatives. Read More
Based on Horizon iX series, Gemini enables high-volume electronics manufacturers to increase output while ensuring accuracy, quality, and yield. This back-to-back (B2B) printing system, delivering modular processing on-demand, features GUI for usability, can manage 508 x 508 mm print area in industry standard frame, and produces as many as 300 boards/hr. Independent functionality allows one printer to continue running while managing product changeover on other. Read More
Suitable for single and multipass applications, THIEME LAB Digital Laboratory Machine features open design that is individually customized to user's needs. Both printing format and transport technology can be varied. It is also possible to combine digital and screen printing stations into single hybrid machine. Distinguished by high-precision linear technology and variable print head arrangement, machine can be programmed for substrate thicknesses up to 50 mm. Read More
Suitable for continuous inline production, cJET-24 Flatbed Conveyor Inkjet Printer supports uni- and bi-directional CMYK+WW printing. Unit allows production of any image directly from standard graphic files to product with no need for intermediate steps. In addition to 3 L ink tanks with liquid level sensor alarms, printer includes automatic print head maintenance and smart platen height adjustment system that automatically detects and optimizes distance between print heads and substrate. Read More
Equipped with Motion Screen feature that automatically corrects printing position by moving screen, RP-1 achieves high-accuracy positioning of ±10 µm and high-speed printing within 6 sec plus printing time. Automatic Solder Dispenser option keeps volume of solder paste on screen at constant, minimum, and necessary amount to prevent smears and smudges and reduce mounting defects. High-Speed Cleaning option utilizes blade to wipe away solder from bottom of screen. Read More