Wright Tool Co.    Barberton, OH 44203
Jun 06, 2013 Available in various sizes, 14 straight-handle striking-face-box wrenches help crews ensure safety and reliability as they work on blowout preventers and flanges in pipeline construction and maintenance. These fracking tools feature 6-point design for increased fastener contact as well as stamped stud and nut sizes that facilitate identification. Colored in orange, tool line includes 5/8–2 ½ in. stud sizes.

Chicago Pneumatic Co.    Rock Hill, SC 29730-7463
Dec 11, 2012 With reverse impact torque of 2,140 lb-ft, CP7782 Series includes standard (CP7782), 6 in. extended (CP7782-6), and 6 in. extended spline anvils (CP7782-SP6) variants suited for truck and heavy equipment professionals performing wheel removal and general maintenance. In addition to full teasing trigger and pinless reinforced rocking dog clutch, features include angled down exhaust, 4-position, soft-grip side handle, and forward/reverse regulator.

CS Unitec, Inc.    Norwalk, CT 06850
Oct 10, 2012 Made from Copper-Beryllium, Non-sparking Torque Wrench eliminates risk of sparks at sites where explosive atmospheres may be present. This non-magnetic and corrosion-resistant tool, offering click mechanism for turning clockwise and counterclockwise, has clockwise torque range of 22–120 lb-ft, ½ in. square drive, and 18 ¼ in. long lever handle. Design enables use in Ex Zones 0, 1, 2, 20, 21, and 22, and torque calibration can be monitored via visual torque indicator.

Lowell Corp.    West Boylston, MA 01583
Aug 31, 2012 Intended for utility, construction, and maintenance workers who need to tighten nuts on transmission towers, 100T Series Triple Square Transmission Tower Wrenches provide 3-in-1 functionality to enhance operational flexibility. Each wrench uses proprietary ratchet technology and has 3 square sizes in 1 permanent socket to handle common nut sizes in tower fasteners. Bolt-Thru design of wrench head and socket facilitates tightening nuts on bolts of any threaded length.

Lowell Corp.    West Boylston, MA 01583
Jun 08, 2012 Cast malleable iron 40 Series wrenches are available up to 48 in. long with square, hex, or round/keyed openings up to 4 ½ in. Features include reversing controls in head; enclosed, replaceable gears; and bolt-thru design that facilitates nut tightening. Accommodating hex and square sockets that can be changed out via removable retaining ring, 50 Series socket wrenches feature ratchet handles up to 64 in. long, socket openings up to 9 in., in-head reversing control, and bolt-thru design.

Aven, Inc.    Ann Arbor, MI 48108
Mar 14, 2012 Made of 400 series stainless steel, Adjustable Wrenches come in 6, 8, 10, and 12 in. sizes, with or without PVC grips. Units lock into position when user applies pressure, assuring knurls will not loosen and jaws will not slip. Hardened steel can be autoclaved and tolerates caustic cleaning solutions. Minimizing ferrous contamination risk, tools are suitable for maintenance in health care, food processing, pharmaceutical labs, marine applications, and chemical production.

Lowell Corp.    West Boylston, MA 01583
Feb 27, 2012 Serving industrial, construction, water, high line utility, and home applications, Simplex and Warnock strap wrenches make it possible to turn any shape without scratching, denting, or crushing. Simplex standard duty line includes S-1224, S-1230, and S-1848, and Warnock includes W-1224, W-1230, and W-1848. For both lines, handle lengths range from 12-18 in., strap lengths vary from 24-48 in., and capacities span 4-10 in. Baked-on epoxy finish is resistant to solvents.

Wright Tool Co.    Barberton, OH 44203
Nov 02, 2011 Polished with chrome-plated finishes, Cougar Pro(TM) Combination Wrenches come in 11- and 14-piece SAE sets with sizes ranging from 3/8 to 1 ¼ in., as well as 11- and 18-piece metric sets with sizes from 7-24 mm. Cougar Pro Reversible-Ratcheting Combination Wrenches, featuring 72-teeth ratcheting action that turns fasteners with only 5° arc swing, come in 8-piece SAE set with sizes ranging from 5/16-¾ in. and 8-piece metric set ranging from 8-19 mm.

Wright Tool Co.    Barberton, OH 44203
Sep 27, 2011 Offered in metric sizes from 7-24 mm, Wright Tool open-end and combination wrenches are available with WrightGrip(TM) high-strength, anti-slip design. This feature ensures wrench fits snugly on fastener, preventing jaws from spreading and tool from slipping. Series of strategically placed teeth or grooves on insides of wrench's 2 jaws promote precision seating of wrench on fastener, while slight enlargement of wrench opening's back end helps stiffen wrench jaws.

Channellock, Inc.    Meadville, PA 16335-0519
May 11, 2011 Measuring 8.8 in. long and weighing 1.1 lb, No. 87 Rescue Tool features hardened cutting edges designed to shear through soft metal and standard battery cables. Narrow jaw fits into tight spaces, while tapered pry wedge helps firefighters, first responders, and EMTs open doors and windows. Additional features include gas shut-off valve slot and spanner wrench, with latter able to tighten/loosen up to 5 in. hose couplings.

Wright Tool Co.    Barberton, OH 44203
Jan 27, 2011 Available in 2 and 3 ft handle sizes, with 12-point wrench openings in 17 sizes ranging from 1-2 in. in diameter, Strike-Free Wrenches are specifically designed for use where false blows are not permitted. Tools are suitable for heavy-duty applications where striking-face box wrenches cannot be used and where cheater bars should not be used. Wrenches also loosen and tighten large fasteners in confined areas where there is not enough room to swing striking tool.

Aven, Inc.    Ann Arbor, MI 48108
Dec 17, 2010 Available in 6 sizes with overall lengths of 5-8 in., Grade 420 Stainless Steel Combination Wrenches are corrosion-resistant and can be autoclaved up to 250°F. Tools have open end angled at 15° and 12-point box end for hexagonal or square nuts. Provided individually or as 6-piece set in roll-up pouch, wrenches help assure aseptic environments in critical areas for industrial, scientific, and health care users. Sizes include 5/16, 3/8, 7/16, 1/2, 9/16, and 5/8 in.

Metabo Corp.    West Chester, PA 19380 4243
Mar 03, 2010 Operating from 18 V Li-Ion battery packs, ½ in. PowerMaster SSW18 features Variospeed electronics with 3 speed ranges from 0-1,600, 0-2,150, and 0-2,650 rpm. Air-cooled charging technology uses guided air flow ducting to cool battery pack to level temperature during charging, while Electronic Single Cell Protection electronically monitors battery cells to prevent damage. Weighing 4.1 lb, wrench has die cast aluminum gear housing for optimal heat dissipation.

Reed Manufacturing Co.    Erie, PA 16512
Jan 11, 2010 Designed to handle pentagon nuts up to 1 7/8 in. or square nuts up to 1¼ in., Ratcheting Hydrant Wrenches feature long handle for leverage and snug-fitting socket that adjusts using thumb screw feature. Wrenches are suitable for emergencies or general maintenance like flushing, and need just 14° of swing, which is useful when operating in tight places.

Disc Lock International    Culver City, CA 90230
Nov 05, 2009 Electrically powered Model DL-537E utilizes outer socket to engage nut and inner socket to engage bolt. Two sockets rotate in counter force allowing nut to turn while bolt remains stationary, preventing torque from passing to operator. DISC-LOCK tension control bolt is available in hex head and button head configurations, both using DISC-LOCK locking nut. Free-spinning and vibration-proof, self-locking nut solves problem of fastener failure.

Stanley-Proto Industrial Tools; A Division of The Stanley Works    Conyers, GA 30013
Jul 08, 2009 Capable of turning square, 6 pt, 12 pt, spline, and external torx®, 7 spline box wrenches and 15 spline combination wrenches are designed for high tensile strength spline fasteners used in military and commercial aircraft as well as heavy machinery. Anti-Slip Design helps prevent unit from slipping off fastener when turning. With corrosion resistant finishing, unit meets ASME, military, and aerospace specifications.

Channellock, Inc.    Meadville, PA 16335-0519
Jun 24, 2009 Featuring narrow jaw that fits into tight spaces, No. 89 rescue tool has hardened cutting edge designed to shear through soft metal and standard battery cables. It also features gas shut-off valve slot, tapered pry wedge to open doors and windows, and spanner wrench that tightens and loosens up to 6 in. hose couplings. Lightweight tool also has window punch that can shatter safety glass.

Stanley-Proto Industrial Tools Div. of Stanley Mechanics Tools    New Britain, CT 06052
May 07, 2009 Offered with openings ranging from 2 9/16 to 4 in. and from 55-80 mm, and in lengths up to 3 ft, Extra-Large Combo Wrenches are made from drop-forged steel for strength and durability. Open ends are precisely machined for firm grip on fasteners, while 12-point box ends optimize accessability. Wrenches with opening sizes up to 2¾ in. or 70 mm come with satin finish, protecting them against corrosion and providing slip-resistant grip. Larger sizes have non-reflective black oxide finish.

Stanley-Proto Industrial Tools Div. of Stanley Mechanics Tools    New Britain, CT 06052
May 06, 2009 Available in 10 and 14 in. lengths with jaw capacities from ½-2 in., Proto Grip(TM) Pipe Wrenches feature spring loaded hook jaw that automatically adjusts opening to work size and tightens as user bears down on handle. Made from forged steel, jaw includes special tooth design to tightly grip work. Ratcheting action enables one-handed operation, which is useful when turning threaded pipe fittings. Thumb trigger is used for quick removal from work.

Tohnichi America Corp.    Northbrook, IL 60062-2420
Apr 08, 2009 Available in 6 models with torque measurement ranges covering 10-850 Nm, Series CTA2 allows operator to enter torque and angle data either through keypad or by included PC software. Upon reaching desired torque, display changes from torque to angle mode. Intermittent buzzer sounds when approaching set angle, and blue lamp lights and steady buzzer sounds when set angle is achieved. CTA2 wrench is designed for small lot production, maintenance, and after-service applications.