Weidmuller, Inc.    Richmond, VA 23236
May 14, 2012 Safe for working in applications up to 1,500 Vdc and 1,000 Vac in accordance with DIN EN 60900, IEC 900, SlimLine screwdrivers let users access deeply inset screws and operate spring of tension clamp terminal blocks. Protective insulation is molded directly onto screwdriver blade, ensuring electrical safety from handle to blade tip. Available with slot-head, cross-head (Phillips), or pozidrive tips, screwdrivers feature ergonomic handle with SoftFinish® zone for grip.

PB Swiss Tools    Gainesville, GA 30501
Oct 18, 2011 Supplied in roll-up case, PB Swiss Tools 8220 Toolkit accommodates needs of those who install, maintain, and troubleshoot PCs, workstations, and more. Features include flat, Phillips, Torx®, and 5 mm socket screwdrivers as well as interchangeable blade assortment. While slender round form foster precision work, structured, slip-proof surface promotes safe screw tightening/loosening. Precision screwdrivers feature rotating cap and round shaped handle end.

Makita U.S.A., Inc.    La Mirada, CA 90638
Sep 26, 2011 Powered by 18 V LXT Lithium-Ion battery, Model LXSF01 is engineered with rubberized pistol grip and 2-finger trigger. Cordless tool features adjustable nose piece for consistent screw depth, reversible belt clip, and LED light to illuminate work surface. Measuring 11 1/8 in. long and weighing 3.8 lb, screwdriver is suitable for hanging sheetrock and metal framing as well as installing subfloors, backerboard, and decking.

Channellock, Inc.    Meadville, PA 16335-0519
Aug 16, 2011 Code Blue® 13 'N 1 and 18 'N 1 ratcheting screwdrivers provide 2-way operation and facilitate bit swapping via handle-based storage. In addition to 4 Phillips tips, 2 slotted tips, 4 Torx® bits, 2 square recessed bits, and ¼ in. hex shaft, all-purpose Code Blue 13 'N 1 includes dual-composition comfort grip and 28-tooth ratchet that delivers 225 lb-in. torque. For added utility, 18 'N 1 tool includes 4 Phillips tips, 4 slotted tips, 4 Torx bits, 4 hex bits, and 2 nutdriver bits.

Mountz, Inc.    San Jose, CA 95112
Jun 01, 2011 Powered by 10.8 and 14.4 V Li-Ion batteries, FlexPower by Mountz cordless screwdrivers come in pistol and right-angle models that collectively cover 8.8-265.5 lb-in range. Tools automatically stop when preset torque has been reached or when battery has less than 25% of charge to ensure quality. Along with audible and visual indicators, design integrates ergonomic hand grip that promotes control and reduces fatigue. Right-angle models are distinguished by brushless motor.

Express Assembly Products, LLC    Amherst, NH 03031
May 27, 2011 Available in push-to-start or lever start models, EA series electric screwdrivers come with external power supply that plugs into 112 or 220 V source and converts it to 20 or 30 Vdc, depending upon screwdriver. Ergonomically designed non-slip grip minimizes operator fatigue, and units also integrate stepless torque adjuster at tip. Lightweight screwdrivers are suited for assembly applications that require repeatable torque as well as ESD protection.

Bondhus Corp.    Monticello, MN 55362 9347
Apr 25, 2011 Ergonic Series screwdrivers feature handle design that conforms to tool user's hand, eliminating pressure points and making the screwdriver more comfortable to use. Less force is needed to grip the handle so more force can be directed to turning screw head. Machined screwdriver blades deliver long-life performance, and tool is available in standard, flexible shaft, and insulated versions.

Black & Decker U.S., Inc.    Towson, MD 21286
Oct 07, 2010 Available in 12, 16, and 20 V max models, LITHIUM Drill/Drivers feature both Lithium Ion Battery Technology and Smart Charge Technology(TM), enabling tools to hold charge up to 500 days between projects. LED work light illuminates project area, while 11-position clutch helps to prevent stripping of screws. Additional features include soft grips for comfort, 3/8 in. chuck, and onboard bit storage.

Ingersoll-Rand Co.    Bryan, OH 43506
Sep 28, 2010 Available in pistol, angle, and inline styles, QE2 Series operates with ICD and M Series controllers to apply precise torque to fasteners using variety of advanced tightening algorithms. Full closed-loop transducerized control delivers traceability and error-proofing to maximize product quality. Suitable for both critical and non-critical applications, tools feature ESD-safe composite bodies, comfortable handles, integral headlights, and status lights.

PennEngineering® (Penn Engineering)    Danboro, PA 18916
Sep 27, 2010 With StickShooter(TM) driver, PEM® StickScrew® System accommodates interchangeable nose assemblies and allows for quick tooling changeover. Self-contained system combines air-powered driver with sticks of serially connected hex head screws, enabling automatic screw installation without handling loose screws or driving them manually. Screws install by inserting stick in driver, advancing stick of screws, squeezing trigger, and placing tip of rotating screw into hole.

Ideal Industries, Inc.    Sycamore, IL 60178
Sep 27, 2010 Designed for electricians, 21-n-1 Twist-a-Nut(TM) has 4 most frequently used bits pre-loaded into driver shaft. Additional 12 bits are securely stored for quick access within handle. Dual interchangeable chrome-vanadium shafts are designed for driving ¼, 5/16, and 7/16 in. nuts, and handle also has 2 Accu-Loop(TM) wire looping holes along with Wire-Nut® ratcheting wrench formed into its bottom. Tool is built around all-metal, 28-tooth ratcheting mechanism that delivers 225 lb torque.

Mountz, Inc.    San Jose, CA 95112
Sep 27, 2010 Accommodating assembly industry demands for repeatable, cell-based torque driver, HD Series uses both air and electric power to set and control torque. Pneumatic pressure sensor and algorithm enables precision digital torque selection, while brushless DC motor provides repeatable torque control. Adjustable torque and parameter settings occur with one touch on front panel or via PLC signal. Torque control system also features built-in error proofing data and screw counter.

Mountz, Inc.    San Jose, CA 95112
Aug 20, 2010 Available in push-to-start or lever-start models, E-DRIV NF-Series covers torque range of 2.6-39 lb-in. and is ESD certified, ensuring less than 1 W at bit tip. Units feature non-contact magnetic sensors, built-in adjustable speed control, and both Over Heat Protection and Over Current Protection, which protect against damage or malfunction. Also available, NF-Series Plus model offers selectable Double Hit Mode for soft joint applications.

Count On Tools    Gainesville, GA 30501
Jun 04, 2010 Available in 4 models, lightweight and compact Insider tool includes ergonomic Multicraft handle with basic convex form for increased hand torque. Offered with variety of PB PrecisionBits, the two Insider 1 models feature either short bit holder or long blade, while Insider 2 has universal bit holder for ¼ in. bits. Insider 3 models include ratcheting modules with switch ratchets, providing simple handling and allowing screws to be comfortably twisted.

Count On Tools    Gainesville, GA 30501
Jun 02, 2010 Titanium SwissGrip® Screwdrivers feature slip-proof handles that are autoclaveable up to 120°C and are resistant to harsh chemicals. Soft Santoprene® handle coating transfers high hand torque onto screws. Anodized for identification, screwdrivers are non-magnetic for use around sensitive equipment; corrosion-resistant; nonsparking for use where hazardous, flammable, or combustible vapors, liquids, dusts, or residues are present; and hypoallergenic.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Mar 10, 2010 Eliminating need for multiple drivers, 11 in 1 Screwdriver incorporates patented ECX(TM) bit that prevents bit wear from hardened screws and extends bit life when fastening specialty screws found in electrical boxes, conduit couplers, outlets, and other common job site fixtures. Fastening functions include #1 Phillips, #2 Phillips, ¼ and 3/16 in. slotted, #1 ECX(TM), #2 ECX(TM), and ¼, 5/16, and 3/8 in. nut drivers. Tool also has integrated wire stripper and wire bending hole for 12 ga wire.

Ideal Industries, Inc.    Sycamore, IL 60178
Mar 08, 2010 Suited for contractors, electricians, and auto mechanics, Professional-Grade Screwdriver features thermoplastic Grip-n-Twist(TM) screw-holding mechanism that runs entire length of 7 in. tempered steel shaft. Spring-action locking system engages and disengages screws with thumb movement, letting user set, start, and tightly fasten screw with one hand. Available in Phillips and Slotted versions, screwdriver has cushion-grip handle and slip-resistant tip.

Express Assembly Products, LLC    Amherst, NH 03031
Dec 17, 2009 Shut-off oil pulse torque screwdrivers feature auto shut-off clutch that shuts tool down once torque setting is reached and are manufactured with ergonomically designed pistol grips. Non shut-off oil pulse tools feature bit that stops turning once torque value of tool is reached, and are offered with inline, angle, and pistol grips. Both types have high torque ranges with accuracy of ±5% and integrate exhaust silencer to ensure operator comfort.

Metabo Corp.    West Chester, PA 19380 4243
Aug 17, 2009 Equipped with ½ in. chuck that allows for drilling ½ in. in mild steel and 2 in. in wood, rugged BS18 LTX features dual range torque adjustment from either 13-31 or 31-114 lb-in. It has fast-charging 18 V, 2.6 AH Li-Power Extreme battery and offers no-load speed of 0-400 rpm in first gear and 0-1,400 rpm in second gear. Device has aluminum die cast gear housing and features technology that allows user to remove chuck and drive screws with ¼ in. hexagon recessed spindle.

Mountz, Inc.    San Jose, CA 95112
Aug 14, 2009 Manufactured to comply with Class 100 Clean Room standards, CRS Series is polished and sealed with PTFE-impregnated, anodized coating. External components are corrosion resistant, and smooth skin seals prevent transportation of any contaminants into clean room. With models ranging from 0.7 ozf-in. to 120 lbf-in., hand tool series features cam-over design that prevents fastener/bolt from being over-torqued. Series also features tamper-proof internal adjustment.