Reed Manufacturing Co.    Erie, PA 16512
May 21, 2013 Suitable for plastic pipe specialists, fire protection, and plumbing contractors, TC2PPDEB1-2SK includes Reed Quick Release™ Tubing Cutter and 2 DEB deburr/chamfer tools for plastic pipe, all in plastic case. Tubing cutter produces square cut so pipe bottoms out in fitting for maximum strength, while deburr/chamfer tools allow even distribution of glue around fitting for optimal fit of glue joints. Kit works for Schedule 40 and 80 PVC, CPVC, and PE pipe. 

Stellram    La Vergne, TN 37086
May 02, 2013 While wear- and deformation-resistant NL200 is intended for machining cast iron, wear-resistant NL250 is suited for semi-finishing and finishing applications. Medium and rough machining of steels and cast iron materials with light scale but no interruption can be accomplished with NL300, and NL400 handles medium and rough machining on stainless steel and exotic alloys. Fine grain NL920, with edge security on steels and stainless steels, serves rough and heavy machining applications.

Pallet Repair Systems, Inc.    Jacksonville, IL 62650
Feb 05, 2013 Double End Trim Saw is equipped with two 7.5 hp direct arbor saw motors that utilize 16 in. diameter blades and 2-strand feed chain that is powered by 1 hp motor and gear reducer. Machine double end trims pallet lumber, both decking and stringers, to finished lengths of 28–60 in. Standard features include hopper feed system and quick adjust length changeover. Scrap conveyors, custom fit for each application, are available as options.

PennEngineering® (Penn Engineering)    Danboro, PA 18916
Jan 16, 2013 Operating on 90 psi air, ATLAS® RIV 990 promotes installation of full or half-hex bodied blind threaded inserts. Tool accommodates interchangeable noses to correspond with hole-size requirements. Upon proper hole conversion, variety of metric blind threaded inserts can be installed permanently in aluminum, steel, or stainless steel panels of any hardness and as thin as .020 in. Inserts can be specified in thread sizes from #8-32 to 5/16-18 and M4–M8, and in flat, thin, or countersunk head styles.

RIDGID    Elyria, OH 44035
Jan 07, 2013 At 13.5 lb and 11.5 in. long, 238-P helps plumbers and mechanical contractors cut soil pipe in hard-to-reach spaces overhead and below ground. Product is designed for use with ½ in. impact driver and incorporates chain that can cut up to 8 in. dia no-hub cast iron, service weight cast iron, clay pipe, and up to 6 in.dia concrete pipe. Additionally, 2-directional operation lets users score pipe before cutting for cleaner result, and torque limit protects unit from overloading.

Walter USA, Inc.    Waukesha, WI 53188
Dec 21, 2012 Part of Tiger•tec® Silver for Turning Series, RP5 has positive 3° chamfer and wide chip breaker groove that maintains low cutting temperature during roughing. MP5 geometry, with 3-center curve cutting edge, is suited for medium machining of steel. MP3 geometry excels at medium machining on long chip forming steels such as low carbon and forging steels, while FP5, used for finishing operations, features double V chip breaker for chip control during turning operations from 0.008 in. depth of cut.

Makita U.S.A., Inc.    La Mirada, CA 90638
Dec 12, 2012 Model VJ01W is driven by motor that delivers 0–2,400 strokes/min, and variable-speed control dial lets user match speed to application. With 3 orbital settings plus straight cutting, tool is suited for cutting range of materials. Through-the-body dust port is provided for use with vacuum, while built-in dust blower clears line-of-cut for improved visibility. Respective max cutting depths for wood, aluminum, and mild steel are 2 9/16, 5/32, and 1/16 in., and bevel capacity is 45°.

Phoenix Contact    Harrisburg, PA 17111 0100
Nov 16, 2012 Inserted in handle of tool, Crimpfox-WF die provides stripping capability from 20-10 AWG and cutting capabilities from 24-10 AWG, in addition to crimping. Tool features easy follow through ratchet release and releasable pressure lock mechanisms. Crimpfox-N provides optimum transfer of force, requiring minimal manual impact.

AZCO Corp.    Fairfield, NJ 07004
Oct 29, 2012 Installed as stand-alone or in-line units, guillotine knife assemblies can be mounted in any position and are designed for extended blade life, clean cuts, and minimal maintenance. Cutting rate is up to 400 cuts/min, governed by air pressure, flow rate, and cut length, and blade openings and clearances can be modified to meet specific requirements. Able to cut various flexible materials, assemblies come in heavy-duty and custom units.

CS Unitec, Inc.    Norwalk, CT 06850
Jul 24, 2012 Model EDS 181, with 20 A motor and load speed of 4,300 rpm, cuts through hard stone surfaces, including granite, marble, terrazzo, and more. Cutting depth is adjustable without tools for precise cuts up to 2 1/3 in. deep, and built-in vacuum port enables dust-free operation. Along with support for connection to CS Unitec dust extraction systems, features include soft start, overcurrent cut-off, and motor overload protection with optical overload indicator.

Dapra Corporation    Bloomfield, CT 06002
Jul 16, 2012 Designed for use with Dapra standard steel, carbide-core, and carbide-shank cutter bodies, Ball Nose inserts with PCD tips are precision-ground to provide sharp, accurate cutting radius. Diamond-tipped inserts exhibit wear resistance that lends to extended tool life in milling soft, non-ferrous materials, such as aluminum and graphite. Available diameters include 3/8, ½, and ¾ in.

Walter USA, Inc.    Waukesha, WI 53188
Apr 25, 2012 Prototyp Protodyn® HSC thread former is solid carbide tool engineered to improve thread forming cutting speed, productivity, and tool life. It features micrograin carbide substrate that is mated with hard multi-layer TiCN coating that makes it suitable for use in all formable materials with an Si-content of less than 12%, such as steel, stainless steel, and aluminum. It possesses a shank tolerance h6 for use in shrink-fit chucks and its polygonal form reduces friction for increased tool life.

Makita USA, Inc.    Buford, GA 30518
Mar 30, 2012 Powered by 4.5 in.³ engine with 5.1 hp rating and no load speed of 9,350 rpm, 14 in. Model EK7301 features ignition coil with start-support function that stores electrical power with each pull. Carburetor includes deco-valve and metering spring for precise fuel regulation at start up, minimizing flooding. SLR muffler recycles unburned fuel vapor for efficient fuel consumption. For operator comfort, Model EK7301 includes cushion grips with 4 vibration absorption rubber buffers.

Makita USA, Inc.    Buford, GA 30518
Mar 28, 2012 Weighing 3.9 lb, RT0700C Compact Router offers variable speed control from 10,000-30,000 rpm, enabling user to match speed to application. Tool is double-insulated with heavy-duty aluminum motor housing, rack-and-pinion fine depth adjustment system, soft start feature, and electronic speed control that maintains constant speed under load. Router is also available in kit, Model RT0700CX3, which includes accessories as well as plunge, tilt, and offset base.

Walter USA, Inc.    Waukesha, WI 53188
Mar 05, 2012 Available for threads M3-M16, TMC Thread Milling Cutter is made of wear-resistant ultra-fine-grade carbide with multilayer TiCN coating. Tool features helix angle of 27° with shortened flute run-out and internal coolant supply from as low as thread size M4. Suitable for use on all materials up to hardness of 48 HRC, cutter is also available in uncoated version.

Hyde Industrial Blade Solutions    Southbridge, MA 01550
Mar 05, 2012 Ergonomically engineered for use by left- and right-handed workers, 6.5 in. long Hyde Loop Hoof Knife reduces stress, wear, and tear on wrists and fingers of farriers while effectively trimming frog and soles of hoofs. Blade utilizes .515 in. dia x 1.3 in. long, CNC-machine ground, high-carbon steel cutting edge that is sharpened on inside and mounted to HammerHead® molded handle. Latter features polypropylene core and thermoplastic elastomer soft grip covering to absorb shock.

Kennametal, Inc.    Latrobe, PA 15650-0231
Dec 06, 2011 Specifically engineered for machining carbon fiber reinforced polymer parts, Beyond(TM) KCN05(TM) Routers possess solid carbide substrate and HP diamond coating. Four models are available, including ball-nose router dedicated for pocketing and profiling, down-cut style with left-hand flutes that compress fibers as it cuts, compression-style router with left-hand flutes on shaft and right-hand flutes at bottom, and burr-style model with many thin flutes for optimized productivity.

Wilson Tool International Inc.    White Bear Lake, MN 55110
Nov 15, 2011 Offering standard holders with truly universal punches, EXP(TM) punch technology is designed to fit in all styles of A and B station thick turret assemblies. It is available for every major brand of thick turret tooling, and design enables use of same holder with multiple punches. Available in round or special shapes, products are manufactured with Ultima(TM) premium tool steel for utmost wear resistance and are fully compatible with all current guide assemblies.

Robert Bosch GmbH    Waiblingen D-71332  Germany
Oct 13, 2011 Using ultrasonic technology, Model WRQ 0400 US cuts product arriving in mass ropes into individual bars and applies minimum pressure while cutting to preserve product quality. Knife ensures that product does not stick to surface of blades, making system suitable for cutting sensitive, sticky, laminated, or layered products. Capable of producing 80 cuts/min, Model WRQ 0400 US has max cutting height of 30 mm and can be adjusted to handle cutting lengths from 20-200 mm.

Vezzani, S.p.A.    Ovada   Italy
Sep 29, 2011 Designed for productivity and durability, VS Series pre-compression shear is offered as mobile system in 600-700 ton range that utilizes inclined-plane gravity feed system. Single operator can load feed box, which is inclined to 30° angle, and operate shear via remote control system from cab of any standard loader. Operator never has to stop loading to process batch, because material automatically advances into side compression chamber.