FZLED    New Taipei City   Taiwan
Apr 29, 2013 Weighing 0.03 kg and measuring 16 mm dia x 105 mm long, FZL-2110 produces bright white beam with 30° angle up to 50 m using Nichia LED with 50,000+ hr lifespan. This 1 W LED light emits 70 lm and offers brightness levels up to 2,400 lux at 1 m. Constructed of aluminum alloy with anodized finish, torch is IP54 rated for dust and water resistance and features pen clip design. Power is supplied by 1 AAA battery, which provides up to 10 hr run time.

Maxxeon Inc.    Ottawa   Canada
Apr 03, 2013 Using UV LED, WorkStar® 224 UV penlight (MXN00224) produces 240+ mW in 395–400 nm wavelength range to facilitate detection of urine and other bodily fluid stains in bathrooms of hotels, restaurants, hospitals, and other institutions. T6 aluminum body has Type II violet anodizing, and water resistant design has threaded joints with rubber O-ring seals. Offering ON/OFF operation and momentary action position, inspection tool features sealed tailcap switch rated at 100,000 cycles.

Larson Electronics, LLC    Kemp, TX 75143
Dec 07, 2012 Able to operate for 2.5 hr on one charge of its snap-in, rechargeable Li-Ion battery pack, RL-85-HID produces 15 million candlepower light beam capable of reaching over 2,800 ft. Beam can also be adjusted by user to produce tightly focused and intense spotlight beam or wide floodlight beam. Designed to meet demands of hunting community, this 3,200 lm spotlight features pistol grip styling, weighs 3 lb 6 oz, and supports red lens assembly accessory.

Larson Electronics, LLC    Kemp, TX 75143
Nov 16, 2012 Approved for Class 1, Division 1 hazardous locations, ATX-20-SE Explosion Proof HID Flashlight produces 1,200 lumens with color temperature of 6,500 K, and throws light beam up to 2,500 ft long. Flashlight has 4,800 mAh Li-Ion battery allowing it to run for approximately 140 min on full charge. Aluminum body is covered with black anodized finish for durability and is sealed for IP68-rated waterproof protection. Unit is suitable for use by utilities and emergency responders.

K&H Industries, Inc.    Hamburg, NY 14075
Sep 21, 2012 Available for NightRay H3 Spotlight, wireless dash mount controller permanently mounts in vehicle with industrial fasteners, eliminating need for hard wired controller. Models include: 775-20KFDM Wireless NightRay, Par 46 H3 Spotlight only, with dash mount controller; NR-775-20DDW Dual Controlled NightRay, Par 46 H3 Spotlight only, with dash mount controller and handheld key fob; and NR-20KFDS Dash mounted Wireless Controller, which can be programmed to any wireless NightRay Spotlight.

Larson Electronics, LLC    Kemp, TX 75143
Jul 23, 2012 Class 1 Division 1 compliant, explosion proof Model EXP-LED-FX2 is suitable for use as inspection or work light in locations where flammable gases, vapors, and chemicals present explosion or fire hazard. Waterproof flashlight is constructed with ABS plastic housing, shatterproof LEXAN lens, and non-slip grip. LEDs produce 160 lumens with up to 14 hrs of runtime on single set of AAA alkaline batteries. Dual mode operation includes 80 lumen spotlight and 80 lumen floodlight.

Larson Electronics, LLC    Kemp, TX 75143
Jun 07, 2012 Featuring explosion proof design, Model EPL-UV-20W-G2 is constructed with aluminum body, internal ballast, deep anodized finish, and rubber lens and end caps for resistance to drops and impacts. Included 355 Nm UV cutoff lens tightens UV output of bulb to produce 200 ft long UV light beam. Users can also switch UV lens with included clear lens to produce normal visible light beam. Powered by removable 2,600 mAh lithium ion battery pack, flashlight will operate for 90 minutes on single charge.

Larson Electronics, LLC    Kemp, TX 75143
May 24, 2012 Suited for military and law enforcement applications as well as industrial heavy equipment, PML-40W-PAR46 comes in red, amber, green, blue, IR, and UV as well as spotlight and floodlight configurations. Permanent mount 40 W vehicle light is equipped with MILSPEC 461 certified PAR46 LED bulb and has waterproof fixture fitted with adjustable hinged mounting bracket. Product operates from 9-46 Vdc, supporting direct connection to vehicles with 12 or 24 V electrical system.

FZTech, Inc    New Taipei   Taiwan
Apr 03, 2012 Employing 4 Cree LEDs, MR16-05 series accepts 12 V AC/DC input, runs on 5 W, and allows for illumination from front and back of spotlight. Body enhances heat dissipation, which ensures long life, and unit does not produce any UV, IR, or heat emissions. Suited for discreet installation, series offers luminous flux of 380 (±10%) or 450 (±10%) lm, CCT of 3000K or 6000K, and CRI of greater than 80 (WW) or or 75 (CW). Choice of beam angle includes -30° and 45° options.

K&H Industries, Inc.    Hamburg, NY 14075
Feb 28, 2012 HazLoc Lantern features 340° rotating head with 70° pivoting angle that allows operators to position light either horizontally or vertically and angle light beam directly at worksite. Hand-held safety lantern features induction charging with no charge contacts, no exposed metal, buoyant material construction, and 10 hour run time. Designed for maintenance and repair professionals, lens is surrounded by molded rubber bumper to absorb shock.

Larson Electronics, LLC    Kemp, TX 75143
Jan 20, 2012 Featuring vibration-resistant, 35 W HID bulb that outputs 3,200 lm with 4300K color temperature, Magnalight R-11 produces beam that reaches 3,000+ ft in standard spotlight configuration. Portable and waterproof unit, powered via Li-ion battery pack that provides 90 min of run time per charge, can connect to external 12-24 Vdc power source and comes with snap-on diffuser lens for converting to flood mode. Available R-11-IRF IR conversion lens lets users convert spotlight to IR output.

Laser Devices, Inc.    Monterey, CA 93940
Jan 19, 2012 Featuring less than 200 lm high intensity white light LED in addition to Class 1, Eye-Safe IR LED illuminator, OV-3 attaches to any MIL-STD-1913 rail. Variable lens adjustment from 7.5° to 15°, combined with 450 mW of IR illumination, provides eye-safe means of illuminating distances up to 200 m. Other features include 8 Hz strobe mode for tactical light and dual tailcap that provides operators with choice of pushbutton or remote cable pressure pad switch activation with double tap feature.

Dorcy International    Columbus, OH 43217
Jan 10, 2012 Operating on three AAA alkaline batteries, Model 41-4280 can throw beam up to 426 ft and features twistable focus control ring for beam adjustment. Aluminum LED flashlight includes strobe feature which is operated by cap button. Measuring 5.25 x 1.00 in. and available in yellow or black, flashlight is O-ring sealed to promote weather resistance and will operate for 3 hr on set of batteries.

Larson Electronics, LLC    Kemp, TX 75143
Dec 01, 2011 Delivering 3,200 lm, HUL-18-HID-RED-C employs 35 W HID bulb and aluminum reflector to produce beam that reaches up to 2,500 ft. Construction includes nylon housing, polycarbonate handle, borosilicate hardened glass lens, and 16 ft coil cord with cigarette plug. Rated IP67 waterproof, spotlight features camouflage finish and comes in 12 and 24 Vdc configurations. Red polymer lenses are included for applications that may require them.

Dorcy International    Columbus, OH 43217
Nov 28, 2011 Operating on 6 AA alkaline batteries that drive Cree XM-L LED module, Dorcy Metal Gear XLM (extreme lumen) LED aluminum flashlight is machined from aerospace grade anodized material and will run for 5+ hr on high setting and 25+ hr on low. Features include TrueSpot® Optimized Reflector System and side-mounted push button switch. Tested to ANSI FL1 flashlight standards, product measures 9 x 1.5 in., weighs 15.5 oz with batteries, produces 618 lm, and is IPX-4 water resistant.

Larson Electronics, LLC    Kemp, TX 75143
Nov 10, 2011 Equipped with 10 W LED light head, LED10W-1SCB produces 900 lm output and ~250 ft long x 40 ft wide beam. Suction cup base and dual ball joint mounting system, suited for use in locations where magnetic mount wouldn't work, provide secure placement on any smooth surface; allow directional adjustability; and are vehicle tested to speeds of 90 mph. Adjustable through 360° of rotation and 140° of tilt, light comes in IP68, extruded aluminum housing.

Larson Electronics, LLC    Kemp, TX 75143
Nov 08, 2011 Producing 3,000 lm beam that extends up to 5,000 ft, remote controlled GL-3085H-M HID Golight Stryker Spotlight mounts via 200 lb grip magnetic base and features UV- and weather-resistant housing. Unit employs one 35 W HID bulb, operates on 12 Vdc, and draws 3 A. Wireless remote control has 100 ft range, and spotlight movement capabilities include 360° of rotation as well as 170° of tilt. In addition to standard thick glass lens, unit accommodates optional GLS-LREDA red lens.

Larson Electronics, LLC    Kemp, TX 75143
Nov 04, 2011 Waterproof to 100 m, RL-12 high intensity discharge (HID) flashlight delivers 4,500 lm and produces 5,500 ft long light beam. This 50 W HID lantern, featuring machined aluminum housing and 3 in. reflector assembly, has magnetic switch that promotes operational reliability. When batteries have run for ~120 min and can no longer power main HID lamp, user can toggle to rear LED lamp for additional 240 min of low-level illumination. Lenses are also included for producing colored light.

Besa Lighting Co., Inc.    Blacklick, OH 43004
Jul 15, 2011 Designed for 12 V monorail systems, LED MR16-type lamps use 6 W of electricity and have rated life of 25,000 hr. Products suit general lighting purposes and are available with 5 spotlight families. Divi, Nico 3, Scope, and Tammi 3 families include handcrafted glass decors, while Tipster family has minimalist design without any glass. Spotlights can also be used with Besaquick-connect canopies, which feature no-load electronic transformers optimized for LED lamps.

Larson Electronics, LLC    Kemp, TX 75143
Jul 11, 2011 Featuring 3 settings, Model EXP-LED-51 can be toggled between light levels using multi-function switch. Pressing switch once activates light in high mode to produce 130 lumens and 4 hr of runtime. Holding switch down activates light in low mode and produces 50 lumens that lasts up to 12 hr. Extreme runtime is produced by holding switch down for 10 sec, which activates dim mode, producing 1.3 lumens with 480 hr runtime. Charging base, acting as holder, can be mounted to walls or flat surfaces.