Columbia Marking Tools, Inc.
Chesterfield, MI 48047
Sep 07, 2007 Using soft-impact marking action, Slide-a-Mark(TM) Series marks various metallic or non-metallic surfaces. Available in standard and high power ranges, Models 751 and 851 feature marking force of 8 and 10 tons, respectively with max suggested operating pressure of 80 psi. Standard tool has max approach stroke of 2½ in. However, either model can be ordered with max strokes of 4, 6, and 8 in. Both are equipped with fixed, internal flow or speed controls that do not require adjustment.

Richwood Industries, Inc.
Huntington, WV 25714
Sep 07, 2007 Installed as part of new swing arm sampler or retrofitted into existing one, Correct Cut(TM) System provides complete belt support profile for optimizing sampling quality, operating efficiency, and belt protection. It consists of Combi-Pact® Impact Saddle, which supports belt directly under swing arm cutter, and radius contour Cushion Arc® Idler on each side. System forms and supports belt in optimum position for complete sample collection and spillage reduction.

Cooper Power Tools
Lexington, SC 29071
Sep 06, 2007 Equipped with 3-chamber air motor, Cleco® D Series provides optimal power during fastening applications. Design allows technicians to perform maintenance without special tools, and enables users to operate tools for extended periods of time with minimized fatigue. Onboard inertial shut-off system removes variability and complexity associated with monitoring pulse fluid pressure.

Cooper Power Tools
Lexington, SC 29071
Aug 29, 2007 Constructed with ergonomic weight and size considerations, Cleco® 18-48 series uses brushless motor with high-resolution resolver and mechanical reaction transducer technologies. Products are offered in angle, pistol, and in-line versions, delivering torque from 2-230 Nm to accommodate bolt sizes from M5-M16. Designed to promote speed, angle, and torque control during operation, series incorporates low-compression mechanical start switch and on-board memory chip.

Master Appliance Corp.
Racine, WI 53403
Aug 01, 2007 UT-100Si-TC Ultratorch® Professional Heat Tool Kit includes UT-100Si Ultratorch self-igniting, butane powered, multi-functional soldering iron, flameless heat tool, and hot knife in plastic storage/carrying case. Offering adjustable temperatures up to 1,202°F, soldering iron includes self-ignition button and built-in fuel filter. Ultratorch soldering tips with Ultratip® Technology feature oxygen-free copper base, ceramic catalyst, and iron and chrome plating.

Bondhus Corp.
Monticello, MN 55362 9347
Jul 31, 2007 Available in ballpoint hex and star tips, ProHold® Tip Screw Holding Tools include T-handles, screwdrivers, and L-wrenches in full range of inch and metric hex sizes from .050-3/8 in. and 1.27-10 mm. Each tool tip has non-magnetic, corrosion-proof button that securely holds screws on tool, eliminating dropped screws, even in hard-to-reach applications. Button is on flat of hex tool, eliminating weakened tool corners and tool failure.

Sluggo-Ox Corp.
Franklin, MA 02038
Jul 26, 2007 Made of 3 in. hot-rolled, heat-treated, hardened steel, Sluggo-Ox(TM) has 3½ in. deep bore and accepts 5/8 or ¾ in. ground rod, rebar, or other metal implements. Once implement is inserted into bore, sledge hammer is used to pound Sluggo-Ox, forcing metal rod into earth. Tool can then be removed and is ready for next application. Large striking surface helps prevent bodily injury and damage to sledge hammer, and yellow zinc chromate surface coating deters rust.

Graco Inc.
Minneapolis, MN 55440
Jul 17, 2007 Weighing 14 oz, Model XTR-5 can spray single-component, plural-component, and industrial high solids coatings. It includes EasyGlide(TM) swivel for hose and gun movement under high pressures, and Easy Out(TM) gun filter for minimized tip plugging. Variety of handle and trigger options are available to maximize operator comfort.

DeWalt Industrial Tool Co.
Hampstead, MD 21074
Jul 16, 2007 Suited for maintenance and repair operations, Model DC415KL can cut door hardware and locks, old anchors, tile, electrical cable, and rusted fasteners. It can also be used to finish ornamental and handrail welds, and prepare for several applications such as rail cable repair, remote cutting and welding, and mounting tabs. Features include Quick-Change wheel release system, protected spindle lock button, jam-pot, low profile gear case, and paddle switch with lock-off system.

PB Swiss Tools
Gainesville, GA 30501
Jul 06, 2007 Suited for machining and delicate assembly work, PB MultiTorque® combines release mechanism of torque device with grip of standard PB Crosshandle screwdriver. Handle is covered with soft Santoprene® for maximum grip, and automatic switch off button allows battery life span of more than 10 yr. Resistant to chemicals, flexibly adjustable tool features 2.4-11.8 ft-lb range with ±6% accuracy complying with EN ISO 6789 standard.

Rhino Linings USA
San Diego, CA 92121
Jul 06, 2007 Designed to handle smaller applications, spot repairs, or hard to reach areas, RhinoPro(TM) Cartridge Gun 600 accepts dual 300 ml size cartridges, while RhinoPro(TM) Cartridge Gun 1500 accepts for dual 750 ml cartridges. Lightweight and portable guns require only small air compressor, and feature regulator, over-pressure safety system, automatic and manual return, and heavy-duty plunger body.

Metabo Corp.
West Chester, PA 19380 4243
Jul 03, 2007 Combining essential functions of drill with power of pneumatic hammer, Model P'7911 drills into concrete, stone, wood, and steel with one switch. Unit features carbon fiber and aluminum housing with handle mounted on top. Producing 2.0 joules per blow, 705 W, 6 A multihammer has drilling capacity of ¾ in. in concrete, and includes quick-change chuck system, electronic speed stabilization, and pneumatic impact mechanism.

Esco Tool
Medfield, MA 02052
Jun 26, 2007 Fin MILLHOG® Tube Fin Removal Tool removes 4 in. of fin from tube OD in less than 4 minutes and bevels the end all in one step. Capable of working in any position, air powered tool clamps to tube ID and has no reaction torque. Product features tool steel cutter blade and heavy-duty rack and pinion feed mechanism for rapid insertion into tube. Cutter blade is made from high grade tool steel, can be resharpened, and requires no cutting lubricants.

Ripley Co.
Cromwell, CT 06416
Jun 26, 2007 Featuring Split Jaw technology, Models CT2-AS and CT2-AS-EX can assemble 59, 6, 7, and 11 F compression type connectors as well as RCA, IEC, and Mini connectors. Available in 2 distinct colors for identification of connector use, Model CT2-AS features spring loaded handles and push button handle lock. Spring loaded split jaws position cable and connector for insertion/removal and can be used around and in wall boxes where space and cable length are limited.

Channellock, Inc.
Meadville, PA 16335-0519
Jun 22, 2007 Respectively able to handle retaining rings with diameters up to 1 and 2 in., 6½ in. No. 926 and 8 in. No. 927 feature single-handed, quick-change switch that allows on-the-fly conversion from internal to external retaining rings. Both snap ring pliers come with 5 pairs of color-coded, interchangeable alloy steel tips and CHANNELLOCK BLUE® comfort grips.

Ingersoll-Rand Co.
Annandale, NJ 08801
Jun 13, 2007 Weighing less than 2 lb, 14.4 V IQV(TM) Series GC25 is compatible with 3 in. cutting wheels up to 1/16 in. thick for light-duty cutting jobs. It includes variable speed trigger, adjustable guard, and composite housing that withstands drops as well as fluid and chemical spills. By continuously monitoring tool operation and motor temperature, microprocessor pulses motor on and off if tool begins to overheat. Onboard battery electronics allow operator to choose Li-Ion or Ni-Cad technology.

Onsrud Cutter, LP
Libertyville, IL 60048
Jun 08, 2007 Measuring 3/8 in. diameter, Tuff Core Compression tool utilizes dual-grade carbide that incorporates tough inner core for added strength and wear-resistant outer shell for maximized life in abrasive materials. Since 3/8 in. tool can replace ½ in. compression tools, higher yields are possible.

Victaulic
Easton, PA 18040
Jun 06, 2007 Providing method to join schedule 5, stainless steel Pressfit pipe, Model PFT509 features head that swivels and auto piston retract. Package includes pressing tool, 4 jaws, 1 charger, 2 batteries, and installation gauge marking set. Suited for utility and air services, Pressfit® System is flame-free and meets ASME requirements and ratings for ANSI class 150 systems up to maximum of 300 psi.

Xuron Corp.
Saco, ME 04072 1840
May 25, 2007 Suited for wide range of avionics, harness making, and repair applications, Suite of Aviation Tools feature Light-Touch(TM) return springs and soft rubber grips. Rigid units include Model 2175 Flush Cutter for cotter keys and safety wire, Model 9200 Micro-Shear® with tapered head for tight spaces, Model 450 needle nose plier, Model 450BN bent nose plier, and Model 505ST adjustable stripper for stranded wire down to 26 gauge without nicked wire strands.

Metabo Corp.
West Chester, PA 19380 4243
May 24, 2007 Model FSX200 Random Orbit Sander offers 9,500 orbits/min at an orbit size of 1/8" while reducing vibration through its rubber-coated gripping surface. Sander's 5 in. hook and loop pad enables Model FSX200 to be fitted with accessories for paint removal, wood finishing, metal buffing and plastic work. FSX200 weighs 3.4 lb, has 2.2 A of motor power and comes equipped with integral dust collection system featuring washable Intec filters.