Technifor, Inc.    Charlotte, NC 28273
Jul 27, 2004 Suited for metallic parts, Model SV312 creates continuous line mark at speed of 19 characters, 7 mm tall, in less than 10 sec. Max scribing depth is 0.3 mm in steel at 110 HB and 0.25 mm in cast iron. Marker utilizes UC312 control unit with screen, internal software, and keyboard, eliminating need for PC or PLC. It can create, modify, and store data to mark. Carbide point is available for rough surfaces, while diamond point is suited for smooth surfaces.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Jul 27, 2004 Heavy-Duty 33-pocket tool belts, available in 3- or 5-piece versions, are made from tear-resistant 600 Denier Ripstop Polyester and 1800 Denier Ballistic Polyester, respectively. Both feature flat-bottom pouches and miscellaneous pockets. Also available, 55 Pocket Bucket Tool Organizer and 50 Pocket Bucket-Less Tool Organizer feature pockets of assorted shapes and sizes positioned inside and out with bar tacked stress points and internal drill holster.

Eraser Company, Inc., The    Syracuse, NY 13221
Jul 26, 2004 Custom Design Service addresses material processing requirements specifically tailored to individual needs of various applications. Service includes custom wire, cable, and tubing cutters; wire and cable strippers; and wire twisters. It also provides custom wire brush wheels, dereelers, infrared heating equipment, measuring tools, and fybRglass erasers.

Valenite, Inc.    Madison Heights, MI 48071 9636
Jul 23, 2004 ValMILLâ„¢ V490 Series square-shoulder face mills have 90° geometry that enables multitask cutting for applications such as shoulder milling, slot and channel milling, edge trimming, and face or surface milling. Three coated grades of inserts include 2 multi-layer PVD TiAIN/TiN coatings and TiN/A1₂0₃/TiCN MTCVD for tough machining. Mill sizes available are 2, 2.5, 3, 4, 5, and 6 in. dia with insert numbers ranging from 4 on 2 in. dia to 10 inserts for 6 in. size.

Dorner Mfg. Corp.    Hartland, WI 53029 0020
Jul 20, 2004 Plastic clipper and stainless steel clipper belt splicing options enable users to change belts on conveyors. Belts outfitted with said options can be replaced on tight-fitting conveyors or conveyors buried in machines by removing one pin. Installation is accomplished by wrapping belt around conveyor, splicing belt together in interlocking grooves, and securing it with one pin. Both clippers do not protrude above belt surface.

Techni-Tool, Inc.    Worcest, PA 19490-1117
Jul 15, 2004 VoIP Installer's Tool Kit includes connector crimping pliers, tone and probe kit for tracing lines, telephone test set, and impact tool with 2 reversible 66/110 blades. All tools fit into 19 x 16 x 12 in. tote bag featuring 14 outside pockets to store tools, as well as built-in compartment with parts box, allowing storage of connectors, tapes, ties, and other accessories. Also included in kit are cable splicer knife set, cable stripper, and can wrench.

Esco Tool    Medfield, MA 02052
Jul 09, 2004 Wart Membrane Removal Head for the Wart MILLHOG® right angle welding end prep tool machines membrane from between clad tubes, simultaneously removes overlay, and puts finished end prep on tube. Head features multiple carbide bits with 4 cutting edges each and is designed to perform 37½° and J preps, flat face, and bore clad tubing. Tool requires min 2 5/8 in. radial clearance to fit Dutchman window and has working range from ¾ in. ID to 4½ in. OD.

Heyco Products    Toms River, NJ 08753
Jun 30, 2004 Lockit Pre-Assembly Equipment permanently secures Lockitâ„¢ strain relief bushings to electrical cable and wire, repetitively. Headlockâ„¢ manual, single-feed assembly tool fits onto any tabletop. Autolockâ„¢ and Footlockâ„¢ models are semi-automatic tools for high-volume production runs. Stand-alone Autolockâ„¢ includes large-capacity vibratory feeder bowl, while tabletop Footlockâ„¢ features gravity-fed track. All are controlled by foot pedal for hands-free operation.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Jun 24, 2004 MAG AA Air-Assisted Airless Automatic Spray Gun is suited for multi-gun finishing equipment in high-production environments. It includes integrated in-line fluid filter, with no need to remove gun body when changing filters. Typical applications include wood finishing, leather tanning, metal furniture and fixture manufacturing, fabricated metal manufacturing, and recreational products.

Bivar, Inc.    Irvine, CA 92618 2593
Jun 14, 2004 Designed for cutting or stripping plastic optical fiber (POF) and flexible light pipe (FLP) cabling, palm-sized HandyPro Fiber Cutterâ„¢ is molded from ABS plastic. It cuts 1 and 2mm fibers, including native or sheathed fiber and glass cabling, utilizing integral stainless steel blade. Tool, measuring 1.75 x 1.12 in., accurately strips fiber sheathing or cuts fibers while fitting comfortably in user's palm.

DeVilbiss , ITW Industrial Finishing    Glendale Heights, IL 60139
Jun 07, 2004 Model VTX Spray Gun uses 3-stage process that hydraulically pre-atomizes stains, creating a vortex; forms hollow fluid bulb; and then finely atomizes stain with 2000 air cap and baffle combination. Impingement orifice provides wood finishing professional with 99% consistent color repeatability, virtual elimination of haloing, and reduction in extent and degree of mottling. Spray Gun is suited for non-grain raising, release, dye, and toner stain applications.

Metabo Corp.    West Chester, PA 19380 4243
May 27, 2004 Able to drill into wood, aluminum, and steel, BSP 18 Plus operates from 18 V battery at no-load speeds of 0–400 and 0–1,400 rpm in first and second gears respectively. Motor enables product to drill holes up to 2 in. dia in wood and ½ in. dia in steel. Features include 2-speed gearbox, 20 torque settings, ½ in. keyless chuck, and Variospeed technology. Impuls system lets users drive screws and drill in metals and ceramics without center punching.

Revere Products    Cleveland, OH 44135 0311
May 25, 2004 Constructed from heavy-duty metal, TRAFFIC STRIPERâ„¢ produces 2–4 in. wide lines on asphalt, concrete, or turf. It rolls on 13 in. base created by four 6¾ in. rubber wheels, producing straight, even lines. Wind guard feature allows striping on windy days, minimizing over spray. Unit uses TRAFFIC STRIPE aerosol paint, emptying can with little or no waste, and can hold one case of paint. It is suited for use on parking lots, driveways, and sidewalks.

DeVilbiss Industrial Spray Equipment, ITW Industrial Finishing    Glendale Heights, IL 60139
May 05, 2004 Model EXLâ„¢ HVLP Spray Gun offers large spray pattern that facilitates fast coverage. Even distribution of materials eliminates mottling or striping, and 3 feed types enable optimum atomization for basecoats, clearcoats, and single stages. Unit features stainless steel fluid tip, needle, and fluid inlet adapter with anodized fluid passages. For ease of maintenance, sprayer has interchangeable air caps, fluid tips and needles.

Porter-Cable Corp.    Jackson, TN 38302
Apr 26, 2004 Series 7430K and 7416K 4½ in. angle grinders have spanner wrench on handle that facilitates changing pad, blade, disc, or other accessory during use. Operating at 10,000 rpm and incorporating 3-position auxiliary handle and case, 7430K provides 8 A power with paddle switch and 7416K provides 6 A power with slide switch. They suit sharpening, cutting, sanding, stripping, and grinding applications in construction, masonry, and automotive sectors.

Klein Tools, Inc.    Lincolnshire, IL 60069
Apr 23, 2004 Constructed of No. 8 natural canvas, 5002 and 5003 Series canvas tool bags come in 16, 18, or 20 in. lengths with leather or vinyl bottom and 6-stud bottom reinforcement. Models with leather bottom are available with mounts that accommodate padded, adjustable, 2 in. wide shoulder strap made with non-marking, anti-slip material. All bags feature steel frame mouth with hinge, while 20 in. bags have 14 interior pockets and measure 15 in. deep x 6 in. wide.

Metabo Corp.    West Chester, PA 19380 4243
Apr 13, 2004 Model KHE-D28 D-handle rotary hammer provides consistent speed between load and no-load, making it suitable for through-drilling and anchor setting as well as light chiseling in masonry materials, steel, and wood. The 8.2 A motor provides force of blows of 0–2.5 J at 0–4,600 blows per min, and no-load rpm of 1–1,000. Drilling capacity is 1-1/8 in. in concrete, 1-9/16 in. in wood, and ½ in. in steel. Gooseneck steel gauge facilitates drilling depth accuracy.

AliMed, Inc.    Dedham, MA 02026
Apr 09, 2004 Compliant with ASTM F1505-01, S.I.P. 2-color safety-insulated hand tools are impact-resistant and flame-retardant. Line encompasses 850+ hand tools, including ergonomically-designed sockets, ratchets, wrenches, pliers, and complete tool sets. They are designed for facilities or environments where live voltage up to 1,000 Vac or 1,500 Vdc is present. Company also insulates existing tools to meet IEC 900/ASTM F1505-01, 1,000 Vac safety standards.

Xuron Corp.    Saco, ME 04072 1840
Mar 25, 2004 High Precision Scissor, Model 440 features cutting head that produces clean, square edge on variety of materials including PVC jacketing and photo-etched metal parts. Instead of finger-loops, plier-like tool has soft rubber handles and Light Touch return spring. Suited for assembly workers and field personnel who must repeatedly cut for entire shift, scissor features max cutting diameter of 20 AWG soft wire and up to 0.005 in. soft sheet metal.

Gardner Bender    Milwaukee, WI 53209
Mar 10, 2004 Made of heat-treated aluminum, BIG BENâ„¢ hand benders incorporate dual sight-line system that allows bending on floor or in air. They include highlighted Benfieldâ„¢ markings and are available in sizes of ½, ¾, and 1 in. Other features include Vise-Mateâ„¢ conduit vise; bend-back channel that corrects over-bends; Benfield-style, 30° bend when handle is straight up; sight-down arrows; and sight-across marks.