Makita U.S.A., Inc.    La Mirada, CA 90638
Mar 15, 2006 Powered by 15 A, 3,500 rpm motor, model 4114 has 14 in. blade diameter and 5 in. cutting capacity. Position of tool body, adjustable from 0º to 80º, operates independently of cutting depth. Tool base can be removed for cutting closer to walls, while guide wheels on tool guard ensure smooth travel over surface material. In addition to vacuum attachment port, cutter features Super Joint System that minimizes kickback by disengaging gears from motor if binding occurs.

Makita U.S.A., Inc.    La Mirada, CA 90638
Mar 15, 2006 Four-piece 18 V Cordless Combo Kit, Model LXT401 includes Model BHP451 560 lb-in. Hammer Driver-Drill, Model BSS610 6 ½ in. Circular Saw with built-in dust blower, Model BJR181 tool-less reciprocating saw, Model BML185 4-position adjustable flashlight, 45-min Optimum Charging System, and two 5.0 Ah Li-Ion batteries. Supported with 2 steel ball bearings, 4-pole motor generates energy every 90°. High impact LEDs operate independently from tool to illuminate work area.

FCI/Burndy Products    Manchester, NH 03108
Mar 15, 2006 PAT81KFT-18V 4-POINT(TM) battery-powered hydraulic crimping tool incorporates dieless latch head design eliminating need to purchase and maintain dies. Featuring 360° head rotation, it is designed for use in any position. Allowing for one-hand operation, tool features audible pressure "pop-off" valve and die embossment. Product is suited for use on copper, aluminum, compressed, compact, stranded, solid, and flex conductors.

Wilson Tool International Inc.    White Bear Lake, MN 55110
Mar 08, 2006 Multi-Scribe(TM) sheet metal marking tool handles various materials and can be used for conventional sheet scribing or dot-matrix marking. Depth of mark can be altered as needed to vary from fine to heavy lines. Tool does not deform material or mark underside of sheets. It is available in thick turret, thin turret, Strippit®, Trumpf®, and 114 Wiedemann® styles to accommodate array of punch presses.

Britool    Shropshire   United Kingdom
Mar 07, 2006 Featuring fine-tooth, ratcheting screwdriver with anti-impact, soft-grip rubber handle, BRSDSET1 35-Piece Screwdriver Set includes 150 mm and 250 mm ¼ in. hexagon drivers, ¼ in. square drive screwdriver blade, and 290 mm ¼ in. hexagon driver flexible screwdriver blade. It also has 30 interchangeable bits in slotted, Phillips®, Pozidriv®, Torx®, and Tamper Proof Torx® sizes. Screwdriver is additionally available as stand alone product with 6 interchangeable bits.

Metabo Corp.    West Chester, PA 19380 4243
Mar 06, 2006 Combination kit comes with 2 tools, AC30 charger, and two 18 V 2.0 Ah Ni-Cad batteries. First tool, BSZ 18 Cordless Drill/Driver, delivers 549 lb-in. torque, has 20 torque settings, and incorporates Variospeed electronics for infinite no-load speeds to 1,450 rpm. Also included, KSAP 18 Cordless 6½ in. Circular Saw cuts off and rips lumber up to 2 1/8 in. Ergonomic unit has 2,500 rpm no-load speed, spindle stop system, and locking bevel plate for cuts up to 47°.

Stanley-Proto Industrial Tools; A Division of The Stanley Works    Conyers, GA 30013
Feb 24, 2006 Bolt Extractor Socket's interior surface of 18-30 spiral threads tightly grips damaged fasteners. Suiatble for tight spaces, through-hole design enables access to fasteners at end of long bolts or studs. Socket is turned using box, open end, ratcheting, or socket wrench. Available in sizes ¼-5/8 in. and 7-16 mm, each socket can turn multiple fastener sizes.

Metabo Corp.    West Chester, PA 19380 4243
Feb 07, 2006 Ergonomically designed Angle Grinders feature Vibratech handle, which eliminates direct contact between spindle and grip. Vibration is further diminished by absorbent elastomer between spindle and grip, minimizing operator's risk of Hand Arm Vibration Syndrome, which affects circulation, sensory, and motor nerves. Handle is available on all angle grinders and can be retrofitted on past models.

Lincoln Industrial    St. Louis, MO 63120 1578
Feb 01, 2006 Powered by 14.4 V battery, PowerLuber features machined and hardened piston as well as 2-speed switch for high-pressure or high-volume delivery. It also incorporates smart battery charging system, built-in hose and coupler holder, and cycle indicator pin that monitors grease output. With balanced design and padded grip, tool is designed to promote operator comfort during use. Case is molded from heavy-duty, impact-resistant plastic.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Jan 27, 2006 Suited for spraying aircraft components, Models AA1500 and 4000 are equipped with air cap that can be used with primers and urethane top coats. Side port control on air cap provides balance between atomizing air and fan air, optimizing atomization quality. Fan pattern adjustment enables users to spray hard-to-reach wing areas and small aircraft components. Design minimizes operator fatigue and allows for parts changeouts in less than 5 minutes.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Jan 26, 2006 V18(TM) Series of 18 V cordless tools includes hammer-drill, driver-drill, circular saw, metal cutting circular saw, impact wrench, impact driver, Sawzall® reciprocating saw, rotary hammer, job site radio, and work light. V18 Li-ion batteries can be retrofit onto existing Milwaukee 18 V NiCd tools. Li-Ion and NiCd compatible charger is available that can charge Li-Ion batteries in 60 min and NiCd batteries in 30 min.

ATI Industrial Automation    Apex, NC 27639
Jan 24, 2006 Suited for finishing aluminum, plastic, and steel, air-turbine-driven Flexdeburr® features floating motor and spindle arrangement that provides ±0.31 in. of radial compliance for consistency on irregular part patterns. Spinning at constant 40,000 rpm, tool can finish hard materials at 1-3 ips and soft materials from 3-12 ips. It has 1 air connection at 90 psi to spin cutting file, and second at 60 psi to apply radial force. Compliance force is 1.5-9.5 lb at 5-60 psi.

DeVilbiss , ITW Industrial Finishing    Glendale Heights, IL 60139
Jan 18, 2006 Combining forged aluminum body with removable forged plated brass spray head, Model MBC-510 applies coatings for protection against corrosive environments such as in- and off-shore oil production industry. Gun features cartridge type air valve, large air and fluid passages for minimized cleaning time, and compatibility with variety of air caps and fluid nozzles.

Wilson Tool International Inc.    White Bear Lake, MN 55110
Jan 17, 2006 HP Dura-Blade(TM), available for Strippit® thin turret machines, is engineered with Ultima(TM) Premium Tool Steel to withstand stresses of parting sheet metal. In addition to features such as side-mounted push-button adjustments and quick-release stripper plate retention system that allows for blade insert changes by removing one bolt, product has fully guided design for optimal support and accuracy at punching surface.

Stanley-Proto Industrial Tools; A Division of The Stanley Works    Conyers, GA 30013
Jan 10, 2006 Proto® Custom Tool Kitting lets customers assemble exact set of tools they need for trade, and puts tools in storage systems that let users confirm each tool is returned to proper place. Toolboxes, briefcases, and soft-sided pouches feature foam inserts with cavities precut to profiles of each individual tool, helping to prevent foreign object damage, which is damage cause by tool mistakenly left in piece of machinery after maintenance.

Steck Mfg. Co., Inc.    Dayton, OH 45408 1952
Dec 30, 2005 Used with hammer and punch, Bushing Tool Model 21825 can remove and install door hinge bushings. Offset design allows access to both door half and body half hinges to punch out bushings while maintaining bushing alignment.

Greenlee Textron, Inc.    Rockford, IL 61109
Dec 27, 2005 Featuring ac detection, SF-420AC finds wood and metal studs and joists behind surfaces up to 1½ in. deep. Its SpotLite® Pointing system shines green beam of light over stud edges. Model SF-530 finds copper and other non-ferrous metal up to 1½ in. deep and ferrous metal in concrete up to 3 in. deep. It offers same tracing features as SF-420AC and includes backlit LCD display. Metal Locator LCD display, SF-780, relays proximity, type of metal, and depth of metal up to 6 in.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Dec 22, 2005 Equipped with 6.5 A, variable speed 0-3,000 spm motor, Model 6268-21 uses LED light, securely protected within all-metal gearcase, for cutting line visibility. With 1 in. stroke, 4-position orbital cutting action, and precision roller blade guide system, saw cuts through wood, metal, and laminates. It offers cushion gripping surface on top handle and front nose, Quik-Lok(TM) blade clamp to facilitate blade changes, and keyless bevel shoe that adjusts to 45° in both directions.

Bondhus Corp.    Monticello, MN 55362 9347
Dec 20, 2005 Bit Boy 370 Series screwdrivers are available as fixed blade with magnetic holder, ratcheting, and removable blade versions. All models feature push/twist cap that pops up to allow access to bits without disconnecting cap from handle.

Klein Tools, Inc.    Lincolnshire, IL 60069
Dec 13, 2005 Featuring curved handles, Klein-Kurve® multifunctional tool (Cat. No. 11055-INS) cuts, strips, loops, and gauges solid and stranded wire while protecting user against shock from energized sources up to 1,000 V. It features 2 layers of insulation, integral guards to prevent hand contact with conductive parts, and gauge markings on both sides. Measuring 8 in. long, unit strips 10-18 solid and 12-20 stranded AWG wire and cleanly shears 6-32 and 8-32 screws.